Use the following steps to upgrade a FortiGate-6000 or 7000 HA cluster with
uninterruptible-upgrade enabled from FortiOS 6.2.7 build 1179 or 6.4.2 build 1749 to FortiOS 6.4.6 Build 1783.
uninterruptible-upgrade allows you to upgrade the firmware of an operating FortiGate-6000 or 7000 HA configuration with only minimal traffic interruption. During the upgrade, the secondary FortiGate upgrades first. Then a failover occurs and the newly upgraded FortiGate becomes the primary FortiGate and the firmware of the new secondary FortiGate upgrades.
To perform a graceful upgrade of your FortiGate-6000 or 7000 from FortiOS 6.2.7 or 6.4.2 to FortiOS 6.4.6:
Use the following command to enable uninterruptible-upgrade to support HA graceful upgrade:
config system ha
set uninterruptible-upgrade enable
Download FortiOS 6.4.6 firmware for FortiGate-6000 or 7000 from the https://support.fortinet.com FortiGate-6K7K 6.4.6 firmware image folder.
Perform a normal upgrade of your HA cluster using the downloaded firmware image file.
Verify that you have installed the correct firmware version. For example, for a FortiGate-6301F:
get system status Version: FortiGate-6301F v6.4.6,build1783,211007 (GA) ...