config system snmp user
Use this command to configure SNMP v3 user settings. SNMP v3 adds more security by using authentication and privacy encryption.
Syntax
config system snmp user
edit <user_name>
set query-status {enable | disable}
set query-port <port_number>
set security-level {authnopriv | authpriv | noauthnopriv}
set auth-proto {sha1 | md5}
set aut-pwd <password>
set status {enable | disable}
set trap-status {enable | disable}
set trapevent {cpu | logdisk | datadisk | mem | system}
set trapport-local <port_number>
set trapport-remote <port_number>
config host
edit <host_no>
set ip <class_ip>
end
end
Variable | Description | Default | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
<user_name> |
Enter a name to identify the SNMP user on FortiNDR. | |||||||||||
query-status {enable | disable} |
Enable to allow SNMP v3 query from the SNMP managers. Also configure the query port as described below. | disable | ||||||||||
query-port <port_number> |
Specify the port number used to listen to queries from the SNMP manager. | 161 | ||||||||||
security-level {authnopriv | authpriv | noauthnopriv} |
Choose one of the three security levels for the communication between FortiNDR and the SNMP manager.
|
|||||||||||
auth-proto {sha1 | md5} |
Specify the authentication protocol if you choose authentication for the security level. Otherwise, this option is not displayed. | |||||||||||
aut-pwd <password> |
Specify the authentication password if you choose authentication for the security level. Otherwise, this option is not displayed. | |||||||||||
status {enable | disable} |
Enable or disable the SNMP v3 user on FortiNDR. | disable |
||||||||||
trap-status {enable | disable} |
Enable to activate traps on FortiNDR. | disable |
||||||||||
trapevent {cpu | logdisk | datadisk | mem | system} |
Enter one or more of the following events that will generate a trap when the event occurs or when its threshold is reached
|
Cpu Logdisk datadisk mem system | ||||||||||
trapport-local <port_number> |
Enter the local port number for sending traps. | 162 | ||||||||||
trapport-remote <port_number> |
Enter the remote port number that listens to SNMP traps on the SNMP manager. | 162 | ||||||||||
<host_no> |
Enter an index number for the SNMP manager. | |||||||||||
ip <class_ip> |
Enter the IP address of the SNMP manager. |