config profile authentication radius
Use this command to configure FortiNDR to connect to an external RADIUS server to authenticate FortiNDR Users.
Syntax
config profile authentication radius edit <profile_name> set auth-prot {auto | chap | mschap | mschap2 | pap} set nas-ip <ip_addr> set port <port_int> set secret <password_str> set send-domain {enable | disable} set server {<fqdn_str> | <host_ipv4>} end
Variable |
Description |
Default |
---|---|---|
|
The IP address or FQDN of the POP3 server. |
|
|
The authentication method for the RADIUS server. |
|
|
The NAS IP address and the Called Station ID. If you do not enter an IP address, FortiNDR uses the IP address that the FortiNDR interface uses to communicate with the RADIUS server. For information about RADIUS attribute 31, see Microsoft Vendor-specific RADIUS Attributes. |
|
|
If the RADIUS server listens on a nonstandard port number, enter the port number of the RADIUS server. The standard port number for RADIUS is 1812. |
|
|
The password of the RADIUS server. |
|
|
Enable if the RADIUS server requires both the user name and the domain when authenticating. |
|
|
The IP address or FQDN of the RADIUS server. |
|