config system vdom-sflow

Configure sFlow per VDOM to add or change the IP address and UDP port that FortiGate sFlow agents in this VDOM use to send sFlow datagrams to an sFlow collector.

config system vdom-sflow
    Description: Configure sFlow per VDOM to add or change the IP address and UDP port that FortiGate sFlow agents in this VDOM use to send sFlow datagrams to an sFlow collector.
    config collectors
        Description: sFlow collectors.
        edit <id>
            set collector-ip {ipv4-address}
            set collector-port {integer}
            set source-ip {ipv4-address}
            set interface-select-method [auto|sdwan|...]
            set interface {string}
        next
    end
    set vdom-sflow [enable|disable]
end

config system vdom-sflow

Parameter	Description	Type	Size	Default
vdom-sflow	Enable/disable the sFlow configuration for the current VDOM.	option	-	disable
	Option Description enable Enable sFlow for this VDOM. disable Disable sFlow for this VDOM.

config collectors

Parameter	Description	Type	Size	Default
id	ID.	integer	Minimum value: 0 Maximum value: 4294967295	0
collector-ip	IP addresses of the sFlow collectors that sFlow agents added to interfaces in this VDOM send sFlow datagrams to.	ipv4-address	Not Specified	0.0.0.0
collector-port	UDP port number used for sending sFlow datagrams.	integer	Minimum value: 0 Maximum value: 65535	6343
source-ip	Source IP address for sFlow agent.	ipv4-address	Not Specified	0.0.0.0
interface-select-method	Specify how to select outgoing interface to reach server.	option	-	auto
	Option Description auto Set outgoing interface automatically. sdwan Set outgoing interface by SD-WAN or policy routing rules. specify Set outgoing interface manually.
interface	Specify outgoing interface to reach server.	string	Maximum length: 15