Fortinet white logo
Fortinet white logo

CLI Reference

config router multicast6

config router multicast6

Configure IPv6 multicast.

config router multicast6
    Description: Configure IPv6 multicast.
    config interface
        Description: Protocol Independent Multicast (PIM) interfaces.
        edit <name>
            set hello-holdtime {integer}
            set hello-interval {integer}
        next
    end
    set multicast-pmtu [enable|disable]
    set multicast-routing [enable|disable]
    config pim-sm-global
        Description: PIM sparse-mode global settings.
        set register-rate-limit {integer}
        config rp-address
            Description: Statically configured RP addresses.
            edit <id>
                set ip6-address {ipv6-address}
            next
        end
    end
end

config router multicast6

Parameter

Description

Type

Size

Default

multicast-pmtu

Enable/disable PMTU for IPv6 multicast.

option

-

disable

Option

Description

enable

Enable PMTU for IPv6 multicast.

disable

Disable PMTU for IPv6 multicast.

multicast-routing

Enable/disable IPv6 multicast routing.

option

-

disable

Option

Description

enable

Enable IPv6 multicast routing.

disable

Disable IPv6 multicast routing.

config interface

Parameter

Description

Type

Size

Default

hello-holdtime

Time before old neighbor information expires in seconds.

integer

Minimum value: 1 Maximum value: 65535

hello-interval

Interval between sending PIM hello messages in seconds.

integer

Minimum value: 1 Maximum value: 65535

30

name

Interface name.

string

Maximum length: 15

config pim-sm-global

Parameter

Description

Type

Size

Default

register-rate-limit

Limit of packets/sec per source registered through this RP (0 means unlimited).

integer

Minimum value: 0 Maximum value: 65535

0

config rp-address

Parameter

Description

Type

Size

Default

id

ID of the entry.

integer

Minimum value: 0 Maximum value: 4294967295

0

ip6-address

RP router IPv6 address.

ipv6-address

Not Specified

::

config router multicast6

config router multicast6

Configure IPv6 multicast.

config router multicast6
    Description: Configure IPv6 multicast.
    config interface
        Description: Protocol Independent Multicast (PIM) interfaces.
        edit <name>
            set hello-holdtime {integer}
            set hello-interval {integer}
        next
    end
    set multicast-pmtu [enable|disable]
    set multicast-routing [enable|disable]
    config pim-sm-global
        Description: PIM sparse-mode global settings.
        set register-rate-limit {integer}
        config rp-address
            Description: Statically configured RP addresses.
            edit <id>
                set ip6-address {ipv6-address}
            next
        end
    end
end

config router multicast6

Parameter

Description

Type

Size

Default

multicast-pmtu

Enable/disable PMTU for IPv6 multicast.

option

-

disable

Option

Description

enable

Enable PMTU for IPv6 multicast.

disable

Disable PMTU for IPv6 multicast.

multicast-routing

Enable/disable IPv6 multicast routing.

option

-

disable

Option

Description

enable

Enable IPv6 multicast routing.

disable

Disable IPv6 multicast routing.

config interface

Parameter

Description

Type

Size

Default

hello-holdtime

Time before old neighbor information expires in seconds.

integer

Minimum value: 1 Maximum value: 65535

hello-interval

Interval between sending PIM hello messages in seconds.

integer

Minimum value: 1 Maximum value: 65535

30

name

Interface name.

string

Maximum length: 15

config pim-sm-global

Parameter

Description

Type

Size

Default

register-rate-limit

Limit of packets/sec per source registered through this RP (0 means unlimited).

integer

Minimum value: 0 Maximum value: 65535

0

config rp-address

Parameter

Description

Type

Size

Default

id

ID of the entry.

integer

Minimum value: 0 Maximum value: 4294967295

0

ip6-address

RP router IPv6 address.

ipv6-address

Not Specified

::