config system virtual-wire-pair

Configure virtual wire pairs.

config system virtual-wire-pair
    Description: Configure virtual wire pairs.
    edit <name>
        set member <interface-name1>, <interface-name2>, ...
        set poweroff-bypass [enable|disable]
        set poweron-bypass [enable|disable]
        set vlan-filter {user}
        set wildcard-vlan [enable|disable]
    next
end

config system virtual-wire-pair

Parameter	Description	Type	Size	Default
member <interface-name>	Interfaces belong to the virtual-wire-pair. Interface name.	string	Maximum length: 79
name	Virtual-wire-pair name. Must be a unique interface name.	string	Maximum length: 11
poweroff-bypass *	Enable/disable interface bypass state when power off.	option	-	disable
	Option Description enable Enable bypass when power off. disable Disable bypass when power off.
poweron-bypass *	Enable/disable interface bypass state when power on.	option	-	disable
	Option Description enable Enable bypass when power on. disable Disable bypass when power on.
vlan-filter	VLAN ranges to allow	user	Not Specified
wildcard-vlan	Enable/disable wildcard VLAN.	option	-	disable
	Option Description enable Enable wildcard VLAN. disable Disable wildcard VLAN.

* This parameter may not exist in some models.