config wireless-controller wtp-profile

Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

Description: Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

edit <name>

set comment {var-string}

config platform

Description: WTP, FortiAP, or AP platform.

set type [AP-11N|220B|...]

set mode [single-5G|dual-5G]

set ddscan [enable|disable]

end

set control-message-offload {option1}, {option2}, ...

set apcfg-profile {string}

set ble-profile {string}

set syslog-profile {string}

set wan-port-mode [wan-lan|wan-only]

config lan

Description: WTP LAN port mapping.

set port-mode [offline|nat-to-wan|...]

set port-ssid {string}

set port1-mode [offline|nat-to-wan|...]

set port1-ssid {string}

set port2-mode [offline|nat-to-wan|...]

set port2-ssid {string}

set port3-mode [offline|nat-to-wan|...]

set port3-ssid {string}

set port4-mode [offline|nat-to-wan|...]

set port4-ssid {string}

set port5-mode [offline|nat-to-wan|...]

set port5-ssid {string}

set port6-mode [offline|nat-to-wan|...]

set port6-ssid {string}

set port7-mode [offline|nat-to-wan|...]

set port7-ssid {string}

set port8-mode [offline|nat-to-wan|...]

set port8-ssid {string}

set port-esl-mode [offline|nat-to-wan|...]

set port-esl-ssid {string}

end

set energy-efficient-ethernet [enable|disable]

set led-state [enable|disable]

set led-schedules <name1>, <name2>, ...

set dtls-policy {option1}, {option2}, ...

set dtls-in-kernel [enable|disable]

set max-clients {integer}

set handoff-rssi {integer}

set handoff-sta-thresh {integer}

set handoff-roaming [enable|disable]

config deny-mac-list

Description: List of MAC addresses that are denied access to this WTP, FortiAP, or AP.

edit <id>

set mac {mac-address}

end

set ap-country [--|AF|...]

set ip-fragment-preventing {option1}, {option2}, ...

set tun-mtu-uplink {integer}

set tun-mtu-downlink {integer}

set split-tunneling-acl-path [tunnel|local]

set split-tunneling-acl-local-ap-subnet [enable|disable]

config split-tunneling-acl

Description: Split tunneling ACL filter list.

edit <id>

set dest-ip {ipv4-classnet}

end

set allowaccess {option1}, {option2}, ...

set login-passwd-change [yes|default|...]

set login-passwd {password}

set lldp [enable|disable]

set poe-mode [auto|8023af|...]

set frequency-handoff [enable|disable]

set ap-handoff [enable|disable]

config radio-1

Description: Configuration options for radio 1.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set drma [disable|enable]

set drma-sensitivity [low|medium|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set bss-color {integer}

set bss-color-mode [auto|static]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set dtim {integer}

set beacon-interval {integer}

set 80211d [enable|disable]

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set sam-ssid {string}

set sam-bssid {mac-address}

set sam-security-type [open|wpa-personal|...]

set sam-captive-portal [enable|disable]

set sam-cwp-username {string}

set sam-cwp-password {password}

set sam-cwp-test-url {string}

set sam-cwp-match-string {string}

set sam-cwp-success-string {string}

set sam-cwp-failure-string {string}

set sam-username {string}

set sam-password {password}

set sam-test [ping|iperf]

set sam-server-type [ip|fqdn]

set sam-server-ip {ipv4-address}

set sam-server-fqdn {string}

set iperf-server-port {integer}

set iperf-protocol [udp|tcp]

set sam-report-intv {integer}

set channel-utilization [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set arrp-profile {string}

set max-clients {integer}

set max-distance {integer}

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-2

Description: Configuration options for radio 2.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set drma [disable|enable]

set drma-sensitivity [low|medium|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set bss-color {integer}

set bss-color-mode [auto|static]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set dtim {integer}

set beacon-interval {integer}

set 80211d [enable|disable]

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set sam-ssid {string}

set sam-bssid {mac-address}

set sam-security-type [open|wpa-personal|...]

set sam-captive-portal [enable|disable]

set sam-cwp-username {string}

set sam-cwp-password {password}

set sam-cwp-test-url {string}

set sam-cwp-match-string {string}

set sam-cwp-success-string {string}

set sam-cwp-failure-string {string}

set sam-username {string}

set sam-password {password}

set sam-test [ping|iperf]

set sam-server-type [ip|fqdn]

set sam-server-ip {ipv4-address}

set sam-server-fqdn {string}

set iperf-server-port {integer}

set iperf-protocol [udp|tcp]

set sam-report-intv {integer}

set channel-utilization [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set arrp-profile {string}

set max-clients {integer}

set max-distance {integer}

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-3

Description: Configuration options for radio 3.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set drma [disable|enable]

set drma-sensitivity [low|medium|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set bss-color {integer}

set bss-color-mode [auto|static]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set dtim {integer}

set beacon-interval {integer}

set 80211d [enable|disable]

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set sam-ssid {string}

set sam-bssid {mac-address}

set sam-security-type [open|wpa-personal|...]

set sam-captive-portal [enable|disable]

set sam-cwp-username {string}

set sam-cwp-password {password}

set sam-cwp-test-url {string}

set sam-cwp-match-string {string}

set sam-cwp-success-string {string}

set sam-cwp-failure-string {string}

set sam-username {string}

set sam-password {password}

set sam-test [ping|iperf]

set sam-server-type [ip|fqdn]

set sam-server-ip {ipv4-address}

set sam-server-fqdn {string}

set iperf-server-port {integer}

set iperf-protocol [udp|tcp]

set sam-report-intv {integer}

set channel-utilization [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set arrp-profile {string}

set max-clients {integer}

set max-distance {integer}

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-4

Description: Configuration options for radio 4.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set drma [disable|enable]

set drma-sensitivity [low|medium|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set bss-color {integer}

set bss-color-mode [auto|static]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set dtim {integer}

set beacon-interval {integer}

set 80211d [enable|disable]

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set sam-ssid {string}

set sam-bssid {mac-address}

set sam-security-type [open|wpa-personal|...]

set sam-captive-portal [enable|disable]

set sam-cwp-username {string}

set sam-cwp-password {password}

set sam-cwp-test-url {string}

set sam-cwp-match-string {string}

set sam-cwp-success-string {string}

set sam-cwp-failure-string {string}

set sam-username {string}

set sam-password {password}

set sam-test [ping|iperf]

set sam-server-type [ip|fqdn]

set sam-server-ip {ipv4-address}

set sam-server-fqdn {string}

set iperf-server-port {integer}

set iperf-protocol [udp|tcp]

set sam-report-intv {integer}

set channel-utilization [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set arrp-profile {string}

set max-clients {integer}

set max-distance {integer}

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config lbs

Description: Set various location based service (LBS) options.

set ekahau-blink-mode [enable|disable]

set ekahau-tag {mac-address}

set erc-server-ip {ipv4-address-any}

set erc-server-port {integer}

set aeroscout [enable|disable]

set aeroscout-server-ip {ipv4-address-any}

set aeroscout-server-port {integer}

set aeroscout-mu [enable|disable]

set aeroscout-ap-mac [bssid|board-mac]

set aeroscout-mmu-report [enable|disable]

set aeroscout-mu-factor {integer}

set aeroscout-mu-timeout {integer}

set fortipresence [foreign|both|...]

set fortipresence-server-addr-type [ipv4|fqdn]

set fortipresence-server {ipv4-address-any}

set fortipresence-server-fqdn {string}

set fortipresence-port {integer}

set fortipresence-secret {password}

set fortipresence-project {string}

set fortipresence-frequency {integer}

set fortipresence-rogue [enable|disable]

set fortipresence-unassoc [enable|disable]

set fortipresence-ble [enable|disable]

set station-locate [enable|disable]

end

set ext-info-enable [enable|disable]

set indoor-outdoor-deployment [platform-determined|outdoor|...]

config esl-ses-dongle

Description: ESL SES-imagotag dongle configuration.

set compliance-level {option}

set scd-enable [enable|disable]

set esl-channel [-1|0|...]

set output-power [a|b|...]

set apc-addr-type [fqdn|ip]

set apc-fqdn {string}

set apc-ip {ipv4-address}

set apc-port {integer}

set coex-level {option}

set tls-cert-verification [enable|disable]

set tls-fqdn-verification [enable|disable]

end

set console-login [enable|disable]

set wan-port-auth [none|802.1x]

set wan-port-auth-usrname {string}

set wan-port-auth-password {password}

set wan-port-auth-methods [all|EAP-FAST|...]

end

config wireless-controller wtp-profile

Parameter

Description

Type

Size

Default

comment

Comment.

var-string

Not Specified

control-message-offload

Enable/disable CAPWAP control message data channel offload.

option

ebp-frame aeroscout-tag ap-list sta-list sta-cap-list stats aeroscout-mu sta-health spectral-analysis

Option	Description
ebp-frame	Ekahau blink protocol (EBP) frames.
aeroscout-tag	AeroScout tag.
ap-list	Rogue AP list.
sta-list	Rogue STA list.
sta-cap-list	STA capability list.
stats	WTP, radio, VAP, and STA statistics.
aeroscout-mu	AeroScout Mobile Unit (MU) report.
sta-health	STA health log.
spectral-analysis	Spectral analysis report.

apcfg-profile

AP local configuration profile name.

string

Not Specified

ble-profile

Bluetooth Low Energy profile name.

string

Not Specified

syslog-profile

System log server configuration profile name.

string

Not Specified

wan-port-mode

Enable/disable using a WAN port as a LAN port.

option

wan-only

Option	Description
wan-lan	Enable using a WAN port as a LAN port.
wan-only	Disable using a WAN port as a LAN port.

energy-efficient-ethernet

Enable/disable use of energy efficient Ethernet on WTP.

option

disable

Option	Description
enable	Enable use of energy efficient Ethernet on WTP.
disable	Disable use of energy efficient Ethernet on WTP.

led-state

Enable/disable use of LEDs on WTP .

option

enable

Option	Description
enable	Enable use of LEDs on WTP.
disable	Disable use of LEDs on WTP.

led-schedules <name>

Recurring firewall schedules for illuminating LEDs on the FortiAP. If led-state is enabled, LEDs will be visible when at least one of the schedules is valid. Separate multiple schedule names with a space.

Schedule name.

string

Maximum length: 35

dtls-policy

WTP data channel DTLS policy .

option

clear-text

Option	Description
clear-text	Clear Text Data Channel.
dtls-enabled	DTLS Enabled Data Channel.
ipsec-vpn	IPsec VPN Data Channel.

dtls-in-kernel

Enable/disable data channel DTLS in kernel.

option

disable

Option	Description
enable	Enable data channel DTLS in kernel.
disable	Disable data channel DTLS in kernel.

max-clients

Maximum number of stations .

integer

Minimum value: 0 Maximum value: 4294967295

handoff-rssi

Minimum received signal strength indicator .

integer

Minimum value: 20 Maximum value: 30

handoff-sta-thresh

Threshold value for AP handoff.

integer

Minimum value: 5 Maximum value: 60

handoff-roaming

Enable/disable client load balancing during roaming to avoid roaming delay .

option

enable

Option	Description
enable	Enable handoff roaming.
disable	Disable handoff roaming.

ap-country

Country in which this WTP, FortiAP, or AP will operate .

option

Option	Description
--	NO_COUNTRY_SET
AF	AFGHANISTAN
AL	ALBANIA
DZ	ALGERIA
AS	AMERICAN SAMOA
AO	ANGOLA
AR	ARGENTINA
AM	ARMENIA
AU	AUSTRALIA
AT	AUSTRIA
AZ	AZERBAIJAN
BS	BAHAMAS
BH	BAHRAIN
BD	BANGLADESH
BB	BARBADOS
BY	BELARUS
BE	BELGIUM
BZ	BELIZE
BJ	BENIN
BM	BERMUDA
BT	BHUTAN
BO	BOLIVIA
BA	BOSNIA AND HERZEGOVINA
BW	BOTSWANA
BR	BRAZIL
BN	BRUNEI DARUSSALAM
BG	BULGARIA
BF	BURKINA-FASO
KH	CAMBODIA
CM	CAMEROON
KY	CAYMAN ISLANDS
CF	CENTRAL AFRICA REPUBLIC
TD	CHAD
CL	CHILE
CN	CHINA
CX	CHRISTMAS ISLAND
CO	COLOMBIA
CG	CONGO REPUBLIC
CD	DEMOCRATIC REPUBLIC OF CONGO
CR	COSTA RICA
HR	CROATIA
CY	CYPRUS
CZ	CZECH REPUBLIC
DK	DENMARK
DM	DOMINICA
DO	DOMINICAN REPUBLIC
EC	ECUADOR
EG	EGYPT
SV	EL SALVADOR
ET	ETHIOPIA
EE	ESTONIA
GF	FRENCH GUIANA
PF	FRENCH POLYNESIA
FO	FAEROE ISLANDS
FJ	FIJI
FI	FINLAND
FR	FRANCE
GE	GEORGIA
DE	GERMANY
GH	GHANA
GI	GIBRALTAR
GR	GREECE
GL	GREENLAND
GD	GRENADA
GP	GUADELOUPE
GU	GUAM
GT	GUATEMALA
GY	GUYANA
HT	HAITI
HN	HONDURAS
HK	HONG KONG
HU	HUNGARY
IS	ICELAND
IN	INDIA
ID	INDONESIA
IQ	IRAQ
IE	IRELAND
IM	ISLE OF MAN
IL	ISRAEL
IT	ITALY
CI	COTE_D_IVOIRE
JM	JAMAICA
JO	JORDAN
KZ	KAZAKHSTAN
KE	KENYA
KR	KOREA REPUBLIC
KW	KUWAIT
LA	LAOS
LV	LATVIA
LB	LEBANON
LS	LESOTHO
LY	LIBYA
LI	LIECHTENSTEIN
LT	LITHUANIA
LU	LUXEMBOURG
MO	MACAU SAR
MK	MACEDONIA, FYRO
MG	MADAGASCAR
MW	MALAWI
MY	MALAYSIA
MV	MALDIVES
ML	MALI
MT	MALTA
MH	MARSHALL ISLANDS
MQ	MARTINIQUE
MR	MAURITANIA
MU	MAURITIUS
YT	MAYOTTE
MX	MEXICO
FM	MICRONESIA
MD	REPUBLIC OF MOLDOVA
MC	MONACO
MA	MOROCCO
MZ	MOZAMBIQUE
MM	MYANMAR
NA	NAMIBIA
NP	NEPAL
NL	NETHERLANDS
AN	NETHERLANDS ANTILLES
AW	ARUBA
NZ	NEW ZEALAND
NI	NICARAGUA
NE	NIGER
NO	NORWAY
MP	NORTHERN MARIANA ISLANDS
OM	OMAN
PK	PAKISTAN
PW	PALAU
PA	PANAMA
PG	PAPUA NEW GUINEA
PY	PARAGUAY
PE	PERU
PH	PHILIPPINES
PL	POLAND
PT	PORTUGAL
PR	PUERTO RICO
QA	QATAR
RE	REUNION
RO	ROMANIA
RU	RUSSIA
RW	RWANDA
BL	SAINT BARTHELEMY
KN	SAINT KITTS AND NEVIS
LC	SAINT LUCIA
MF	SAINT MARTIN
PM	SAINT PIERRE AND MIQUELON
VC	SAINT VINCENT AND GRENADIENS
SA	SAUDI ARABIA
SN	SENEGAL
RS	REPUBLIC OF SERBIA
ME	MONTENEGRO
SL	SIERRA LEONE
SG	SINGAPORE
SK	SLOVAKIA
SI	SLOVENIA
ZA	SOUTH AFRICA
ES	SPAIN
LK	SRI LANKA
SE	SWEDEN
SR	SURINAME
CH	SWITZERLAND
TW	TAIWAN
TZ	TANZANIA
TH	THAILAND
TG	TOGO
TT	TRINIDAD AND TOBAGO
TN	TUNISIA
TR	TURKEY
TM	TURKMENISTAN
AE	UNITED ARAB EMIRATES
TC	TURKS AND CAICOS
UG	UGANDA
UA	UKRAINE
GB	UNITED KINGDOM
US	UNITED STATES2
PS	UNITED STATES (PUBLIC SAFETY)
UY	URUGUAY
UZ	UZBEKISTAN
VU	VANUATU
VE	VENEZUELA
VN	VIET NAM
VI	VIRGIN ISLANDS
WF	WALLIS AND FUTUNA
YE	YEMEN
ZM	ZAMBIA
ZW	ZIMBABWE
JP	JAPAN14
CA	CANADA2

ip-fragment-preventing

Method.

option

tcp-mss-adjust

Option	Description
tcp-mss-adjust	TCP maximum segment size adjustment.
icmp-unreachable	Drop packet and send ICMP Destination Unreachable

tun-mtu-uplink

The maximum transmission unit .

integer

Minimum value: 576 Maximum value: 1500

tun-mtu-downlink

The MTU of downlink CAPWAP tunnel .

integer

Minimum value: 576 Maximum value: 1500

split-tunneling-acl-path

Split tunneling ACL path is local/tunnel.

option

local

Option	Description
tunnel	Split tunneling ACL list traffic will be tunnel.
local	Split tunneling ACL list traffic will be local NATed.

split-tunneling-acl-local-ap-subnet

Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL .

option

disable

Option	Description
enable	Enable automatically adding local subnetwork of FortiAP to split-tunneling ACL.
disable	Disable automatically adding local subnetwork of FortiAP to split-tunneling ACL.

allowaccess

Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space.

option

Option	Description
https	HTTPS access.
ssh	SSH access.
snmp	SNMP access.

Change or reset the administrator password of a managed WTP, FortiAP or AP .

option

Option	Description
yes	Change the managed WTP, FortiAP or AP's administrator password. Use the login-password option to set the password.
default	Keep the managed WTP, FortiAP or AP's administrator password set to the factory default.
no	Do not change the managed WTP, FortiAP or AP's administrator password.

Set the managed WTP, FortiAP, or AP's administrator password.

password

Not Specified

lldp

Enable/disable Link Layer Discovery Protocol .

option

enable

Option	Description
enable	Enable LLDP.
disable	Disable LLDP.

poe-mode

Set the WTP, FortiAP, or AP's PoE mode.

option

auto

Option	Description
auto	Automatically detect the PoE mode.
8023af	Use 802.3af PoE mode.
8023at	Use 802.3at PoE mode.
power-adapter	Use the power adapter to control the PoE mode.
full	Use full power mode.
high	Use high power mode.
low	Use low power mode.

frequency-handoff

Enable/disable frequency handoff of clients to other channels .

option

disable

Option	Description
enable	Enable frequency handoff.
disable	Disable frequency handoff.

ap-handoff

Enable/disable AP handoff of clients to other APs .

option

disable

Option	Description
enable	Enable AP handoff.
disable	Disable AP handoff.

ext-info-enable

Enable/disable station/VAP/radio extension information.

option

enable

Option	Description
enable	Enable station/VAP/radio extension information.
disable	Disable station/VAP/radio extension information.

indoor-outdoor-deployment

Set to allow indoor/outdoor-only channels under regulatory rules .

option

platform-determined

Option	Description
platform-determined	Set AP deployment type based on its platform.
outdoor	Set AP deployment type to outdoor.
indoor	Set AP deployment type to indoor.

console-login

Enable/disable FortiAP console login access .

option

enable

Option	Description
enable	Enable FAP console login access.
disable	Disable FAP console login access.

wan-port-auth

Set WAN port authentication mode .

option

none

Option	Description
none	Disable WAN port authentication.
802.1x	Enable WAN port 802.1x authentication.

wan-port-auth-usrname

Set WAN port 802.1x supplicant user name.

string

Not Specified

wan-port-auth-password

Set WAN port 802.1x supplicant password.

password

Not Specified

wan-port-auth-methods

WAN port 802.1x supplicant EAP methods .

option

all

Option	Description
all	Do not specify any EAP methods.
EAP-FAST	Enable EAP-FAST.
EAP-TLS	Enable EAP-TLS.
EAP-PEAP	Enable EAP-PEAP.

config platform

Parameter

Description

Type

Size

Default

type

WTP, FortiAP or AP platform type. There are built-in WTP profiles for all supported FortiAP models. You can select a built-in profile and customize it or create a new profile.

option

221E

Option	Description
AP-11N	Default 11n AP.
220B	FAP220B/221B.
210B	FAP210B.
222B	FAP222B.
112B	FAP112B.
320B	FAP320B.
11C	FAP11C.
14C	FAP14C.
223B	FAP223B.
28C	FAP28C.
320C	FAP320C.
221C	FAP221C.
25D	FAP25D.
222C	FAP222C.
224D	FAP224D.
214B	FK214B.
21D	FAP21D.
24D	FAP24D.
112D	FAP112D.
223C	FAP223C.
321C	FAP321C.
C220C	FAPC220C.
C225C	FAPC225C.
C23JD	FAPC23JD.
C24JE	FAPC24JE.
S321C	FAPS321C.
S322C	FAPS322C.
S323C	FAPS323C.
S311C	FAPS311C.
S313C	FAPS313C.
S321CR	FAPS321CR.
S322CR	FAPS322CR.
S323CR	FAPS323CR.
S421E	FAPS421E.
S422E	FAPS422E.
S423E	FAPS423E.
421E	FAP421E.
423E	FAP423E.
221E	FAP221E.
222E	FAP222E.
223E	FAP223E.
224E	FAP224E.
231E	FAP231E.
S221E	FAPS221E.
S223E	FAPS223E.
321E	FAP321E.
431F	FAP431F.
431FL	FAP431FL.
432F	FAP432F.
432FR	FAP432FR.
433F	FAP433F.
433FL	FAP433FL.
231F	FAP231F.
231FL	FAP231FL.
234F	FAP234F.
23JF	FAP23JF.
831F	FAP831F.
231G	FAP231G.
233G	FAP233G.
431G	FAP431G.
433G	FAP433G.
U421E	FAPU421EV.
U422EV	FAPU422EV.
U423E	FAPU423EV.
U221EV	FAPU221EV.
U223EV	FAPU223EV.
U24JEV	FAPU24JEV.
U321EV	FAPU321EV.
U323EV	FAPU323EV.
U431F	FAPU431F.
U433F	FAPU433F.
U231F	FAPU231F.
U234F	FAPU234F.
U432F	FAPU432F.

mode

Configure operation mode of 5G radios .

option

single-5G

Option	Description
single-5G	Configure radios as one 5GHz band, one 2.4GHz band, and one dedicated monitor or sniffer.
dual-5G	Configure radios as one lower 5GHz band, one higher 5GHz band and one 2.4GHz band respectively.

ddscan

Enable/disable use of one radio for dedicated full-band scanning to detect RF characterization and wireless threat management.

option

disable

Option	Description
enable	Enable dedicated full-band scan mode.
disable	Disable dedicated full-band scan mode.

config lan

Parameter

Description

Type

Size

Default

port-mode

LAN port mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port-ssid

Bridge LAN port to SSID.

string

Not Specified

port1-mode

LAN port 1 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port1-ssid

Bridge LAN port 1 to SSID.

string

Not Specified

port2-mode

LAN port 2 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port2-ssid

Bridge LAN port 2 to SSID.

string

Not Specified

port3-mode

LAN port 3 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port3-ssid

Bridge LAN port 3 to SSID.

string

Not Specified

port4-mode

LAN port 4 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port4-ssid

Bridge LAN port 4 to SSID.

string

Not Specified

port5-mode

LAN port 5 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port5-ssid

Bridge LAN port 5 to SSID.

string

Not Specified

port6-mode

LAN port 6 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port6-ssid

Bridge LAN port 6 to SSID.

string

Not Specified

port7-mode

LAN port 7 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port7-ssid

Bridge LAN port 7 to SSID.

string

Not Specified

port8-mode

LAN port 8 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port8-ssid

Bridge LAN port 8 to SSID.

string

Not Specified

port-esl-mode

ESL port mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP ESL port to WTP WAN port.
bridge-to-wan	Bridge WTP ESL port to WTP WAN port.
bridge-to-ssid	Bridge WTP ESL port to SSID.

port-esl-ssid

Bridge ESL port to SSID.

string

Not Specified

config deny-mac-list

Parameter	Description	Type	Size	Default
mac	A WiFi device with this MAC address is denied access to this WTP, FortiAP or AP.	mac-address	Not Specified	00:00:00:00:00:00

config split-tunneling-acl

Parameter	Description	Type	Size	Default
dest-ip	Destination IP and mask for the split-tunneling subnet.	ipv4-classnet	Not Specified	0.0.0.0 0.0.0.0

config radio-1

Parameter

Description

Type

Size

Default

mode

Mode of radio 1. Radio 1 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

option

Option	Description
disabled	Radio 1 is disabled.
ap	Radio 1 operates as an access point that allows WiFi clients to connect to your network.
monitor	Radio 1 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer	Radio 1 operates as a sniffer capturing WiFi frames on air.
sam	Radio 1 operates as a station that can connect to a neighboring AP for connectivity and health check.

band

WiFi band that Radio 1 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11ax-6G	802.11ax at 6GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

5g-full

Option	Description
5g-full	Full 5G band.
5g-high	High 5G band.
5g-low	Low 5G band.

drma

Enable/disable dynamic radio mode assignment .

option

disable

Option	Description
disable	Disable dynamic radio mode assignment (DRMA).
enable	Enable dynamic radio mode assignment (DRMA).

drma-sensitivity

Network Coverage Factor .

option

low

Option	Description
low	Consider a radio as redundant when its NCF is 100%.
medium	Consider a radio as redundant when its NCF is 95%.
high	Consider a radio as redundant when its NCF is 90%.

airtime-fairness

Enable/disable airtime fairness .

option

disable

Option	Description
enable	Enable airtime fairness (ATF) support.
disable	Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

disable

Option	Description
rtscts	Enable 802.11g protection RTS/CTS mode.
ctsonly	Enable 802.11g protection CTS only mode.
disable	Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

Option	Description
tim	TIM bit for client in power save mode.
ac-vo	Use AC VO priority to send out packets in the power save queue.
no-obss-scan	Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate	Do not send frame using 11b data rate.
client-rate-follow	Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

power-save aggr-limit retry-limit send-bar

Option	Description
disable	Disable packet transmission optimization.
power-save	Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit	Set aggregation limit to a lower value when data rate is low.
retry-limit	Set software retry limit to a lower value when data rate is low.
send-bar	Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

enable

Option	Description
enable	Enable AMSDU support.
disable	Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

enable

Option	Description
enable	Enable support for both HT20 and HT40 on the same radio.
disable	Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

enable

Option	Description
enable	Enable zero wait DFS
disable	Disable zero wait DFS

bss-color

BSS color value for this 11ax radio .

integer

Minimum value: 0 Maximum value: 63

bss-color-mode

BSS color mode for this 11ax radio .

option

auto

Option	Description
auto	Automatically select BSS color value on AP.
static	Set BSS color value on this radio based on 'bss-color' CLI.

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

disable

Option	Description
enable	Select the 400 ns short guard interval (Short GI).
disable	Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

20MHz

Option	Description
160MHz	160 MHz channel width.
80MHz	80 MHz channel width.
40MHz	40 MHz channel width.
20MHz	20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

Target of automatic transmit power adjustment in dBm .

string

Not Specified

-70

power-mode

Set radio effective isotropic radiated power . This power takes into account both radio transmit power and antenna gain. Higher power level settings may be constrained by local regulatory requirements and AP capabilities.

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

integer

Minimum value: 0 Maximum value: 65535

100

80211d

Enable/disable 802.11d countryie.

option

enable

Option	Description
enable	Enable 802.11d countryie.
disable	Disable 802.11d countryie.

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

00:00:00:00:00:00

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management beacon frame.
disable	Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management probe frame.
disable	Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management other frame.
disable	Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi control frame.
disable	Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi data frame
disable	Disable sniffer on WiFi data frame

sam-ssid

SSID for WiFi network.

string

Not Specified

sam-bssid

BSSID for WiFi network.

mac-address

Not Specified

00:00:00:00:00:00

sam-security-type

Select WiFi network security type .

option

wpa-personal

Option	Description
open	Open.
wpa-personal	WPA/WPA2 personal.
wpa-enterprise	WPA/WPA2 enterprise.

sam-captive-portal

Enable/disable Captive Portal Authentication .

option

disable

Option	Description
enable	Enable Captive Portal Authentication.
disable	Disable Captive Portal Authentication.

sam-cwp-username

Username for captive portal authentication.

string

Not Specified

sam-cwp-password

Password for captive portal authentication.

password

Not Specified

sam-cwp-test-url

Website the client is trying to access.

string

Not Specified

sam-cwp-match-string

Identification string from the captive portal login form.

string

Not Specified

sam-cwp-success-string

Success identification on the page after a successful login.

string

Not Specified

sam-cwp-failure-string

Failure identification on the page after an incorrect login.

string

Not Specified

sam-username

Username for WiFi network connection.

string

Not Specified

sam-password

Passphrase for WiFi network connection.

password

Not Specified

sam-test

Select SAM test type .

option

ping

Option	Description
ping	PING test.
iperf	IPERF test.

sam-server-type

Select SAM server type .

option

Option	Description
ip	IPv4 address.
fqdn	Fully Qualified Domain Name address.

sam-server-ip

SAM test server IP address.

ipv4-address

Not Specified

0.0.0.0

sam-server-fqdn

SAM test server domain name.

string

Not Specified

iperf-server-port

Iperf service port number.

integer

Minimum value: 0 Maximum value: 65535

5001

iperf-protocol

Iperf test protocol .

option

udp

Option	Description
udp	UDP.
tcp	TCP.

sam-report-intv

SAM report interval (sec), 0 for a one-time report.

integer

Minimum value: 60 Maximum value: 864000

channel-utilization

Enable/disable measuring channel utilization.

option

enable

Option	Description
enable	Enable measuring channel utilization.
disable	Disable measuring channel utilization.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Not Specified

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

disable

Option	Description
enable	Enable distributed automatic radio resource provisioning.
disable	Disable distributed automatic radio resource provisioning.

arrp-profile

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio.

string

Not Specified

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

disable

Option	Description
enable	Enable WMM call admission control.
disable	Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

option

disable

Option	Description
enable	Enable WMM bandwidth admission control.
disable	Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

2000

config radio-2

Parameter

Description

Type

Size

Default

mode

Mode of radio 2. Radio 2 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

option

Option	Description
disabled	Radio 2 is disabled.
ap	Radio 2 operates as an access point that allows WiFi clients to connect to your network.
monitor	Radio 2 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer	Radio 2 operates as a sniffer capturing WiFi frames on air.
sam	Radio 2 operates as a station that can connect to a neighboring AP for connectivity and health check.

band

WiFi band that Radio 2 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11ax-6G	802.11ax at 6GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

5g-full

Option	Description
5g-full	Full 5G band.
5g-high	High 5G band.
5g-low	Low 5G band.

drma

Enable/disable dynamic radio mode assignment .

option

disable

Option	Description
disable	Disable dynamic radio mode assignment (DRMA).
enable	Enable dynamic radio mode assignment (DRMA).

drma-sensitivity

Network Coverage Factor .

option

low

Option	Description
low	Consider a radio as redundant when its NCF is 100%.
medium	Consider a radio as redundant when its NCF is 95%.
high	Consider a radio as redundant when its NCF is 90%.

airtime-fairness

Enable/disable airtime fairness .

option

disable

Option	Description
enable	Enable airtime fairness (ATF) support.
disable	Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

disable

Option	Description
rtscts	Enable 802.11g protection RTS/CTS mode.
ctsonly	Enable 802.11g protection CTS only mode.
disable	Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

Option	Description
tim	TIM bit for client in power save mode.
ac-vo	Use AC VO priority to send out packets in the power save queue.
no-obss-scan	Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate	Do not send frame using 11b data rate.
client-rate-follow	Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

power-save aggr-limit retry-limit send-bar

Option	Description
disable	Disable packet transmission optimization.
power-save	Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit	Set aggregation limit to a lower value when data rate is low.
retry-limit	Set software retry limit to a lower value when data rate is low.
send-bar	Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

enable

Option	Description
enable	Enable AMSDU support.
disable	Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

enable

Option	Description
enable	Enable support for both HT20 and HT40 on the same radio.
disable	Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

enable

Option	Description
enable	Enable zero wait DFS
disable	Disable zero wait DFS

bss-color

BSS color value for this 11ax radio .

integer

Minimum value: 0 Maximum value: 63

bss-color-mode

BSS color mode for this 11ax radio .

option

auto

Option	Description
auto	Automatically select BSS color value on AP.
static	Set BSS color value on this radio based on 'bss-color' CLI.

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

disable

Option	Description
enable	Select the 400 ns short guard interval (Short GI).
disable	Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

20MHz

Option	Description
160MHz	160 MHz channel width.
80MHz	80 MHz channel width.
40MHz	40 MHz channel width.
20MHz	20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

Target of automatic transmit power adjustment in dBm .

string

Not Specified

-70

power-mode

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

integer

Minimum value: 0 Maximum value: 65535

100

80211d

Enable/disable 802.11d countryie.

option

enable

Option	Description
enable	Enable 802.11d countryie.
disable	Disable 802.11d countryie.

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

00:00:00:00:00:00

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management beacon frame.
disable	Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management probe frame.
disable	Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management other frame.
disable	Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi control frame.
disable	Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi data frame
disable	Disable sniffer on WiFi data frame

sam-ssid

SSID for WiFi network.

string

Not Specified

sam-bssid

BSSID for WiFi network.

mac-address

Not Specified

00:00:00:00:00:00

sam-security-type

Select WiFi network security type .

option

wpa-personal

Option	Description
open	Open.
wpa-personal	WPA/WPA2 personal.
wpa-enterprise	WPA/WPA2 enterprise.

sam-captive-portal

Enable/disable Captive Portal Authentication .

option

disable

Option	Description
enable	Enable Captive Portal Authentication.
disable	Disable Captive Portal Authentication.

sam-cwp-username

Username for captive portal authentication.

string

Not Specified

sam-cwp-password

Password for captive portal authentication.

password

Not Specified

sam-cwp-test-url

Website the client is trying to access.

string

Not Specified

sam-cwp-match-string

Identification string from the captive portal login form.

string

Not Specified

sam-cwp-success-string

Success identification on the page after a successful login.

string

Not Specified

sam-cwp-failure-string

Failure identification on the page after an incorrect login.

string

Not Specified

sam-username

Username for WiFi network connection.

string

Not Specified

sam-password

Passphrase for WiFi network connection.

password

Not Specified

sam-test

Select SAM test type .

option

ping

Option	Description
ping	PING test.
iperf	IPERF test.

sam-server-type

Select SAM server type .

option

Option	Description
ip	IPv4 address.
fqdn	Fully Qualified Domain Name address.

sam-server-ip

SAM test server IP address.

ipv4-address

Not Specified

0.0.0.0

sam-server-fqdn

SAM test server domain name.

string

Not Specified

iperf-server-port

Iperf service port number.

integer

Minimum value: 0 Maximum value: 65535

5001

iperf-protocol

Iperf test protocol .

option

udp

Option	Description
udp	UDP.
tcp	TCP.

sam-report-intv

SAM report interval (sec), 0 for a one-time report.

integer

Minimum value: 60 Maximum value: 864000

channel-utilization

Enable/disable measuring channel utilization.

option

enable

Option	Description
enable	Enable measuring channel utilization.
disable	Disable measuring channel utilization.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Not Specified

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

disable

Option	Description
enable	Enable distributed automatic radio resource provisioning.
disable	Disable distributed automatic radio resource provisioning.

arrp-profile

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio.

string

Not Specified

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

disable

Option	Description
enable	Enable WMM call admission control.
disable	Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

option

disable

Option	Description
enable	Enable WMM bandwidth admission control.
disable	Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

2000

config radio-3

Parameter

Description

Type

Size

Default

mode

Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

option

Option	Description
disabled	Radio 3 is disabled.
ap	Radio 3 operates as an access point that allows WiFi clients to connect to your network.
monitor	Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer	Radio 3 operates as a sniffer capturing WiFi frames on air.
sam	Radio 3 operates as a station that can connect to a neighboring AP for connectivity and health check.

band

WiFi band that Radio 3 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11ax-6G	802.11ax at 6GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

5g-full

Option	Description
5g-full	Full 5G band.
5g-high	High 5G band.
5g-low	Low 5G band.

drma

Enable/disable dynamic radio mode assignment .

option

disable

Option	Description
disable	Disable dynamic radio mode assignment (DRMA).
enable	Enable dynamic radio mode assignment (DRMA).

drma-sensitivity

Network Coverage Factor .

option

low

Option	Description
low	Consider a radio as redundant when its NCF is 100%.
medium	Consider a radio as redundant when its NCF is 95%.
high	Consider a radio as redundant when its NCF is 90%.

airtime-fairness

Enable/disable airtime fairness .

option

disable

Option	Description
enable	Enable airtime fairness (ATF) support.
disable	Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

disable

Option	Description
rtscts	Enable 802.11g protection RTS/CTS mode.
ctsonly	Enable 802.11g protection CTS only mode.
disable	Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

Option	Description
tim	TIM bit for client in power save mode.
ac-vo	Use AC VO priority to send out packets in the power save queue.
no-obss-scan	Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate	Do not send frame using 11b data rate.
client-rate-follow	Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

power-save aggr-limit retry-limit send-bar

Option	Description
disable	Disable packet transmission optimization.
power-save	Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit	Set aggregation limit to a lower value when data rate is low.
retry-limit	Set software retry limit to a lower value when data rate is low.
send-bar	Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

enable

Option	Description
enable	Enable AMSDU support.
disable	Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

enable

Option	Description
enable	Enable support for both HT20 and HT40 on the same radio.
disable	Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

enable

Option	Description
enable	Enable zero wait DFS
disable	Disable zero wait DFS

bss-color

BSS color value for this 11ax radio .

integer

Minimum value: 0 Maximum value: 63

bss-color-mode

BSS color mode for this 11ax radio .

option

auto

Option	Description
auto	Automatically select BSS color value on AP.
static	Set BSS color value on this radio based on 'bss-color' CLI.

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

disable

Option	Description
enable	Select the 400 ns short guard interval (Short GI).
disable	Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

20MHz

Option	Description
160MHz	160 MHz channel width.
80MHz	80 MHz channel width.
40MHz	40 MHz channel width.
20MHz	20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

Target of automatic transmit power adjustment in dBm .

string

Not Specified

-70

power-mode

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

integer

Minimum value: 0 Maximum value: 65535

100

80211d

Enable/disable 802.11d countryie.

option

enable

Option	Description
enable	Enable 802.11d countryie.
disable	Disable 802.11d countryie.

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

00:00:00:00:00:00

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management beacon frame.
disable	Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management probe frame.
disable	Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management other frame.
disable	Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi control frame.
disable	Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi data frame
disable	Disable sniffer on WiFi data frame

sam-ssid

SSID for WiFi network.

string

Not Specified

sam-bssid

BSSID for WiFi network.

mac-address

Not Specified

00:00:00:00:00:00

sam-security-type

Select WiFi network security type .

option

wpa-personal

Option	Description
open	Open.
wpa-personal	WPA/WPA2 personal.
wpa-enterprise	WPA/WPA2 enterprise.

sam-captive-portal

Enable/disable Captive Portal Authentication .

option

disable

Option	Description
enable	Enable Captive Portal Authentication.
disable	Disable Captive Portal Authentication.

sam-cwp-username

Username for captive portal authentication.

string

Not Specified

sam-cwp-password

Password for captive portal authentication.

password

Not Specified

sam-cwp-test-url

Website the client is trying to access.

string

Not Specified

sam-cwp-match-string

Identification string from the captive portal login form.

string

Not Specified

sam-cwp-success-string

Success identification on the page after a successful login.

string

Not Specified

sam-cwp-failure-string

Failure identification on the page after an incorrect login.

string

Not Specified

sam-username

Username for WiFi network connection.

string

Not Specified

sam-password

Passphrase for WiFi network connection.

password

Not Specified

sam-test

Select SAM test type .

option

ping

Option	Description
ping	PING test.
iperf	IPERF test.

sam-server-type

Select SAM server type .

option

Option	Description
ip	IPv4 address.
fqdn	Fully Qualified Domain Name address.

sam-server-ip

SAM test server IP address.

ipv4-address

Not Specified

0.0.0.0

sam-server-fqdn

SAM test server domain name.

string

Not Specified

iperf-server-port

Iperf service port number.

integer

Minimum value: 0 Maximum value: 65535

5001

iperf-protocol

Iperf test protocol .

option

udp

Option	Description
udp	UDP.
tcp	TCP.

sam-report-intv

SAM report interval (sec), 0 for a one-time report.

integer

Minimum value: 60 Maximum value: 864000

channel-utilization

Enable/disable measuring channel utilization.

option

enable

Option	Description
enable	Enable measuring channel utilization.
disable	Disable measuring channel utilization.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Not Specified

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

disable

Option	Description
enable	Enable distributed automatic radio resource provisioning.
disable	Disable distributed automatic radio resource provisioning.

arrp-profile

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio.

string

Not Specified

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

disable

Option	Description
enable	Enable WMM call admission control.
disable	Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

option

disable

Option	Description
enable	Enable WMM bandwidth admission control.
disable	Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

2000

config radio-4

Parameter

Description

Type

Size

Default

mode

Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

option

Option	Description
disabled	Radio 3 is disabled.
ap	Radio 3 operates as an access point that allows WiFi clients to connect to your network.
monitor	Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer	Radio 3 operates as a sniffer capturing WiFi frames on air.
sam	Radio 3 operates as a station that can connect to a neighboring AP for connectivity and health check.

band

WiFi band that Radio 3 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11ax-6G	802.11ax at 6GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

5g-full

Option	Description
5g-full	Full 5G band.
5g-high	High 5G band.
5g-low	Low 5G band.

drma

Enable/disable dynamic radio mode assignment .

option

disable

Option	Description
disable	Disable dynamic radio mode assignment (DRMA).
enable	Enable dynamic radio mode assignment (DRMA).

drma-sensitivity

Network Coverage Factor .

option

low

Option	Description
low	Consider a radio as redundant when its NCF is 100%.
medium	Consider a radio as redundant when its NCF is 95%.
high	Consider a radio as redundant when its NCF is 90%.

airtime-fairness

Enable/disable airtime fairness .

option

disable

Option	Description
enable	Enable airtime fairness (ATF) support.
disable	Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

disable

Option	Description
rtscts	Enable 802.11g protection RTS/CTS mode.
ctsonly	Enable 802.11g protection CTS only mode.
disable	Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

Option	Description
tim	TIM bit for client in power save mode.
ac-vo	Use AC VO priority to send out packets in the power save queue.
no-obss-scan	Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate	Do not send frame using 11b data rate.
client-rate-follow	Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

power-save aggr-limit retry-limit send-bar

Option	Description
disable	Disable packet transmission optimization.
power-save	Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit	Set aggregation limit to a lower value when data rate is low.
retry-limit	Set software retry limit to a lower value when data rate is low.
send-bar	Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

enable

Option	Description
enable	Enable AMSDU support.
disable	Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

enable

Option	Description
enable	Enable support for both HT20 and HT40 on the same radio.
disable	Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

enable

Option	Description
enable	Enable zero wait DFS
disable	Disable zero wait DFS

bss-color

BSS color value for this 11ax radio .

integer

Minimum value: 0 Maximum value: 63

bss-color-mode

BSS color mode for this 11ax radio .

option

auto

Option	Description
auto	Automatically select BSS color value on AP.
static	Set BSS color value on this radio based on 'bss-color' CLI.

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

disable

Option	Description
enable	Select the 400 ns short guard interval (Short GI).
disable	Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

20MHz

Option	Description
160MHz	160 MHz channel width.
80MHz	80 MHz channel width.
40MHz	40 MHz channel width.
20MHz	20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

Target of automatic transmit power adjustment in dBm .

string

Not Specified

-70

power-mode

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

integer

Minimum value: 0 Maximum value: 65535

100

80211d

Enable/disable 802.11d countryie.

option

enable

Option	Description
enable	Enable 802.11d countryie.
disable	Disable 802.11d countryie.

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

00:00:00:00:00:00

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management beacon frame.
disable	Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management probe frame.
disable	Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management other frame.
disable	Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi control frame.
disable	Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi data frame
disable	Disable sniffer on WiFi data frame

sam-ssid

SSID for WiFi network.

string

Not Specified

sam-bssid

BSSID for WiFi network.

mac-address

Not Specified

00:00:00:00:00:00

sam-security-type

Select WiFi network security type .

option

wpa-personal

Option	Description
open	Open.
wpa-personal	WPA/WPA2 personal.
wpa-enterprise	WPA/WPA2 enterprise.

sam-captive-portal

Enable/disable Captive Portal Authentication .

option

disable

Option	Description
enable	Enable Captive Portal Authentication.
disable	Disable Captive Portal Authentication.

sam-cwp-username

Username for captive portal authentication.

string

Not Specified

sam-cwp-password

Password for captive portal authentication.

password

Not Specified

sam-cwp-test-url

Website the client is trying to access.

string

Not Specified

sam-cwp-match-string

Identification string from the captive portal login form.

string

Not Specified

sam-cwp-success-string

Success identification on the page after a successful login.

string

Not Specified

sam-cwp-failure-string

Failure identification on the page after an incorrect login.

string

Not Specified

sam-username

Username for WiFi network connection.

string

Not Specified

sam-password

Passphrase for WiFi network connection.

password

Not Specified

sam-test

Select SAM test type .

option

ping

Option	Description
ping	PING test.
iperf	IPERF test.

sam-server-type

Select SAM server type .

option

Option	Description
ip	IPv4 address.
fqdn	Fully Qualified Domain Name address.

sam-server-ip

SAM test server IP address.

ipv4-address

Not Specified

0.0.0.0

sam-server-fqdn

SAM test server domain name.

string

Not Specified

iperf-server-port

Iperf service port number.

integer

Minimum value: 0 Maximum value: 65535

5001

iperf-protocol

Iperf test protocol .

option

udp

Option	Description
udp	UDP.
tcp	TCP.

sam-report-intv

SAM report interval (sec), 0 for a one-time report.

integer

Minimum value: 60 Maximum value: 864000

channel-utilization

Enable/disable measuring channel utilization.

option

enable

Option	Description
enable	Enable measuring channel utilization.
disable	Disable measuring channel utilization.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Not Specified

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

disable

Option	Description
enable	Enable distributed automatic radio resource provisioning.
disable	Disable distributed automatic radio resource provisioning.

arrp-profile

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio.

string

Not Specified

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

disable

Option	Description
enable	Enable WMM call admission control.
disable	Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

option

disable

Option	Description
enable	Enable WMM bandwidth admission control.
disable	Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

2000

config lbs

Parameter

Description

Type

Size

Default

ekahau-blink-mode

Enable/disable Ekahau blink mode .

option

disable

Option	Description
enable	Enable Ekahau blink mode.
disable	Disable Ekahau blink mode.

ekahau-tag

WiFi frame MAC address or WiFi Tag.

mac-address

Not Specified

01:18:8e:00:00:00

erc-server-ip

IP address of Ekahau RTLS Controller (ERC).

ipv4-address-any

Not Specified

0.0.0.0

erc-server-port

Ekahau RTLS Controller (ERC) UDP listening port.

integer

Minimum value: 1024 Maximum value: 65535

8569

aeroscout

Enable/disable AeroScout Real Time Location Service .

option

disable

Option	Description
enable	Enable AeroScout support.
disable	Disable AeroScout support.

aeroscout-server-ip

IP address of AeroScout server.

ipv4-address-any

Not Specified

0.0.0.0

aeroscout-server-port

AeroScout server UDP listening port.

integer

Minimum value: 1024 Maximum value: 65535

aeroscout-mu

Enable/disable AeroScout Mobile Unit .

option

disable

Option	Description
enable	Enable AeroScout MU mode support.
disable	Disable AeroScout MU mode support.

aeroscout-ap-mac

Use BSSID or board MAC address as AP MAC address in AeroScout AP messages .

option

bssid

Option	Description
bssid	Use BSSID as AP MAC address in AeroScout AP messages.
board-mac	Use board MAC address as AP MAC address in AeroScout AP messages.

aeroscout-mmu-report

Enable/disable compounded AeroScout tag and MU report .

option

enable

Option	Description
enable	Enable compounded AeroScout tag and MU report.
disable	Disable compounded AeroScout tag and MU report.

aeroscout-mu-factor

AeroScout MU mode dilution factor .

integer

Minimum value: 0 Maximum value: 4294967295

aeroscout-mu-timeout

AeroScout MU mode timeout .

integer

Minimum value: 0 Maximum value: 65535

fortipresence

Enable/disable FortiPresence to monitor the location and activity of WiFi clients even if they don't connect to this WiFi network .

option

disable

Option	Description
foreign	FortiPresence monitors foreign channels only. Foreign channels mean all other available channels than the current operating channel of the WTP, AP, or FortiAP.
both	Enable FortiPresence on both foreign and home channels. Select this option to have FortiPresence monitor all WiFi channels.
disable	Disable FortiPresence.

fortipresence-server-addr-type

FortiPresence server address type .

option

ipv4

Option	Description
ipv4	IPv4 address.
fqdn	Fully Qualified Domain Name address.

fortipresence-server

IP address of FortiPresence server.

ipv4-address-any

Not Specified

0.0.0.0

fortipresence-server-fqdn

FQDN of FortiPresence server.

string

Not Specified

fortipresence-port

UDP listening port of FortiPresence server .

integer

Minimum value: 300 Maximum value: 65535

3000

fortipresence-secret

FortiPresence secret password (max. 16 characters).

password

Not Specified

fortipresence-project

FortiPresence project name .

string

Not Specified

fortipresence

fortipresence-frequency

FortiPresence report transmit frequency .

integer

Minimum value: 5 Maximum value: 65535

fortipresence-rogue

Enable/disable FortiPresence finding and reporting rogue APs.

option

disable

Option	Description
enable	Enable FortiPresence finding and reporting rogue APs.
disable	Disable FortiPresence finding and reporting rogue APs.

fortipresence-unassoc

Enable/disable FortiPresence finding and reporting unassociated stations.

option

enable

Option	Description
enable	Enable FortiPresence finding and reporting unassociated stations.
disable	Disable FortiPresence finding and reporting unassociated stations.

fortipresence-ble

Enable/disable FortiPresence finding and reporting BLE devices.

option

enable

Option	Description
enable	Enable FortiPresence finding and reporting BLE devices.
disable	Disable FortiPresence finding and reporting BLE devices.

station-locate

Enable/disable client station locating services for all clients, whether associated or not .

option

disable

Option	Description
enable	Enable station locating service.
disable	Disable station locating service.

config esl-ses-dongle

Parameter

Description

Type

Size

Default

compliance-level

Compliance levels for the ESL solution integration .

option

compliance-level-2

Option	Description
compliance-level-2	Compliance Level 2 - Full Cloud Support, IoT and Fast-Response.

scd-enable

Enable/disable ESL SES-imagotag Serial Communication Daemon .

option

disable

Option	Description
enable	Enable ESL SES-imagotag SCD.
disable	Disable ESL SES-imagotag SCD.

esl-channel

ESL SES-imagotag dongle channel .

option

127

Option	Description
-1	No esl-channel is set.
0	ESL channel 0.
1	ESL channel 1.
2	ESL channel 2.
3	ESL channel 3.
4	ESL channel 4.
5	ESL channel 5.
6	ESL channel 6.
7	ESL channel 7.
8	ESL channel 8.
9	ESL channel 9.
10	ESL channel 10.
127	Managed channel enabled, indicates that the APC (server) is setting the esl-channel via the slot channel

output-power

ESL SES-imagotag dongle output power .

option

Option	Description
a	About 15mW.
b	About 7mW.
c	About 5mW.
d	About 1mW.
e	About 13mW.
f	About 10mW.
g	About 3mW.
h	About 2mW.

apc-addr-type

ESL SES-imagotag APC address type .

option

fqdn

Option	Description
fqdn	Fully Qualified Domain Name address.
ip	IPv4 address.

apc-fqdn

FQDN of ESL SES-imagotag Access Point Controller (APC).

string

Not Specified

apc-ip

IP address of ESL SES-imagotag Access Point Controller (APC).

ipv4-address

Not Specified

0.0.0.0

apc-port

Port of ESL SES-imagotag Access Point Controller (APC).

integer

Minimum value: 0 Maximum value: 65535

coex-level

ESL SES-imagotag dongle coexistence level .

option

none

Option	Description
none	No support for coexistence of USB-Dongle with WiFi AP.

tls-cert-verification

Enable/disable TLS certificate verification .

option

enable

Option	Description
enable	Enable TLS Certificate verification.
disable	Disable TLS Certificate verification.

tls-fqdn-verification

Enable/disable TLS certificate verification .

option

disable

Option	Description
enable	Enable TLS FQDN verification.
disable	Disable TLS FQDN verification.

config wireless-controller wtp-profile

Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

config wireless-controller wtp-profile

Description: Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

edit <name>

set comment {var-string}

config platform

Description: WTP, FortiAP, or AP platform.

set type [AP-11N|220B|...]

set mode [single-5G|dual-5G]

set ddscan [enable|disable]

end

set control-message-offload {option1}, {option2}, ...

set apcfg-profile {string}

set ble-profile {string}

set syslog-profile {string}

set wan-port-mode [wan-lan|wan-only]

config lan

Description: WTP LAN port mapping.

set port-mode [offline|nat-to-wan|...]

set port-ssid {string}

set port1-mode [offline|nat-to-wan|...]

set port1-ssid {string}

set port2-mode [offline|nat-to-wan|...]

set port2-ssid {string}

set port3-mode [offline|nat-to-wan|...]

set port3-ssid {string}

set port4-mode [offline|nat-to-wan|...]

set port4-ssid {string}

set port5-mode [offline|nat-to-wan|...]

set port5-ssid {string}

set port6-mode [offline|nat-to-wan|...]

set port6-ssid {string}

set port7-mode [offline|nat-to-wan|...]

set port7-ssid {string}

set port8-mode [offline|nat-to-wan|...]

set port8-ssid {string}

set port-esl-mode [offline|nat-to-wan|...]

set port-esl-ssid {string}

end

set energy-efficient-ethernet [enable|disable]

set led-state [enable|disable]

set led-schedules <name1>, <name2>, ...

set dtls-policy {option1}, {option2}, ...

set dtls-in-kernel [enable|disable]

set max-clients {integer}

set handoff-rssi {integer}

set handoff-sta-thresh {integer}

set handoff-roaming [enable|disable]

config deny-mac-list

Description: List of MAC addresses that are denied access to this WTP, FortiAP, or AP.

edit <id>

set mac {mac-address}

end

set ap-country [--|AF|...]

set ip-fragment-preventing {option1}, {option2}, ...

set tun-mtu-uplink {integer}

set tun-mtu-downlink {integer}

set split-tunneling-acl-path [tunnel|local]

set split-tunneling-acl-local-ap-subnet [enable|disable]

config split-tunneling-acl

Description: Split tunneling ACL filter list.

edit <id>

set dest-ip {ipv4-classnet}

end

set allowaccess {option1}, {option2}, ...

set login-passwd-change [yes|default|...]

set login-passwd {password}

set lldp [enable|disable]

set poe-mode [auto|8023af|...]

set frequency-handoff [enable|disable]

set ap-handoff [enable|disable]

config radio-1

Description: Configuration options for radio 1.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set drma [disable|enable]

set drma-sensitivity [low|medium|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set bss-color {integer}

set bss-color-mode [auto|static]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set dtim {integer}

set beacon-interval {integer}

set 80211d [enable|disable]

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set sam-ssid {string}

set sam-bssid {mac-address}

set sam-security-type [open|wpa-personal|...]

set sam-captive-portal [enable|disable]

set sam-cwp-username {string}

set sam-cwp-password {password}

set sam-cwp-test-url {string}

set sam-cwp-match-string {string}

set sam-cwp-success-string {string}

set sam-cwp-failure-string {string}

set sam-username {string}

set sam-password {password}

set sam-test [ping|iperf]

set sam-server-type [ip|fqdn]

set sam-server-ip {ipv4-address}

set sam-server-fqdn {string}

set iperf-server-port {integer}

set iperf-protocol [udp|tcp]

set sam-report-intv {integer}

set channel-utilization [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set arrp-profile {string}

set max-clients {integer}

set max-distance {integer}

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-2

Description: Configuration options for radio 2.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set drma [disable|enable]

set drma-sensitivity [low|medium|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set bss-color {integer}

set bss-color-mode [auto|static]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set dtim {integer}

set beacon-interval {integer}

set 80211d [enable|disable]

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set sam-ssid {string}

set sam-bssid {mac-address}

set sam-security-type [open|wpa-personal|...]

set sam-captive-portal [enable|disable]

set sam-cwp-username {string}

set sam-cwp-password {password}

set sam-cwp-test-url {string}

set sam-cwp-match-string {string}

set sam-cwp-success-string {string}

set sam-cwp-failure-string {string}

set sam-username {string}

set sam-password {password}

set sam-test [ping|iperf]

set sam-server-type [ip|fqdn]

set sam-server-ip {ipv4-address}

set sam-server-fqdn {string}

set iperf-server-port {integer}

set iperf-protocol [udp|tcp]

set sam-report-intv {integer}

set channel-utilization [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set arrp-profile {string}

set max-clients {integer}

set max-distance {integer}

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-3

Description: Configuration options for radio 3.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set drma [disable|enable]

set drma-sensitivity [low|medium|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set bss-color {integer}

set bss-color-mode [auto|static]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set dtim {integer}

set beacon-interval {integer}

set 80211d [enable|disable]

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set sam-ssid {string}

set sam-bssid {mac-address}

set sam-security-type [open|wpa-personal|...]

set sam-captive-portal [enable|disable]

set sam-cwp-username {string}

set sam-cwp-password {password}

set sam-cwp-test-url {string}

set sam-cwp-match-string {string}

set sam-cwp-success-string {string}

set sam-cwp-failure-string {string}

set sam-username {string}

set sam-password {password}

set sam-test [ping|iperf]

set sam-server-type [ip|fqdn]

set sam-server-ip {ipv4-address}

set sam-server-fqdn {string}

set iperf-server-port {integer}

set iperf-protocol [udp|tcp]

set sam-report-intv {integer}

set channel-utilization [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set arrp-profile {string}

set max-clients {integer}

set max-distance {integer}

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-4

Description: Configuration options for radio 4.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set drma [disable|enable]

set drma-sensitivity [low|medium|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set bss-color {integer}

set bss-color-mode [auto|static]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set dtim {integer}

set beacon-interval {integer}

set 80211d [enable|disable]

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set sam-ssid {string}

set sam-bssid {mac-address}

set sam-security-type [open|wpa-personal|...]

set sam-captive-portal [enable|disable]

set sam-cwp-username {string}

set sam-cwp-password {password}

set sam-cwp-test-url {string}

set sam-cwp-match-string {string}

set sam-cwp-success-string {string}

set sam-cwp-failure-string {string}

set sam-username {string}

set sam-password {password}

set sam-test [ping|iperf]

set sam-server-type [ip|fqdn]

set sam-server-ip {ipv4-address}

set sam-server-fqdn {string}

set iperf-server-port {integer}

set iperf-protocol [udp|tcp]

set sam-report-intv {integer}

set channel-utilization [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set arrp-profile {string}

set max-clients {integer}

set max-distance {integer}

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config lbs

Description: Set various location based service (LBS) options.

set ekahau-blink-mode [enable|disable]

set ekahau-tag {mac-address}

set erc-server-ip {ipv4-address-any}

set erc-server-port {integer}

set aeroscout [enable|disable]

set aeroscout-server-ip {ipv4-address-any}

set aeroscout-server-port {integer}

set aeroscout-mu [enable|disable]

set aeroscout-ap-mac [bssid|board-mac]

set aeroscout-mmu-report [enable|disable]

set aeroscout-mu-factor {integer}

set aeroscout-mu-timeout {integer}

set fortipresence [foreign|both|...]

set fortipresence-server-addr-type [ipv4|fqdn]

set fortipresence-server {ipv4-address-any}

set fortipresence-server-fqdn {string}

set fortipresence-port {integer}

set fortipresence-secret {password}

set fortipresence-project {string}

set fortipresence-frequency {integer}

set fortipresence-rogue [enable|disable]

set fortipresence-unassoc [enable|disable]

set fortipresence-ble [enable|disable]

set station-locate [enable|disable]

end

set ext-info-enable [enable|disable]

set indoor-outdoor-deployment [platform-determined|outdoor|...]

config esl-ses-dongle

Description: ESL SES-imagotag dongle configuration.

set compliance-level {option}

set scd-enable [enable|disable]

set esl-channel [-1|0|...]

set output-power [a|b|...]

set apc-addr-type [fqdn|ip]

set apc-fqdn {string}

set apc-ip {ipv4-address}

set apc-port {integer}

set coex-level {option}

set tls-cert-verification [enable|disable]

set tls-fqdn-verification [enable|disable]

end

set console-login [enable|disable]

set wan-port-auth [none|802.1x]

set wan-port-auth-usrname {string}

set wan-port-auth-password {password}

set wan-port-auth-methods [all|EAP-FAST|...]

end

config wireless-controller wtp-profile

Parameter

Description

Type

Size

Default

comment

Comment.

var-string

Not Specified

control-message-offload

Enable/disable CAPWAP control message data channel offload.

option

ebp-frame aeroscout-tag ap-list sta-list sta-cap-list stats aeroscout-mu sta-health spectral-analysis

Option	Description
ebp-frame	Ekahau blink protocol (EBP) frames.
aeroscout-tag	AeroScout tag.
ap-list	Rogue AP list.
sta-list	Rogue STA list.
sta-cap-list	STA capability list.
stats	WTP, radio, VAP, and STA statistics.
aeroscout-mu	AeroScout Mobile Unit (MU) report.
sta-health	STA health log.
spectral-analysis	Spectral analysis report.

apcfg-profile

AP local configuration profile name.

string

Not Specified

ble-profile

Bluetooth Low Energy profile name.

string

Not Specified

syslog-profile

System log server configuration profile name.

string

Not Specified

wan-port-mode

Enable/disable using a WAN port as a LAN port.

option

wan-only

Option	Description
wan-lan	Enable using a WAN port as a LAN port.
wan-only	Disable using a WAN port as a LAN port.

energy-efficient-ethernet

Enable/disable use of energy efficient Ethernet on WTP.

option

disable

Option	Description
enable	Enable use of energy efficient Ethernet on WTP.
disable	Disable use of energy efficient Ethernet on WTP.

led-state

Enable/disable use of LEDs on WTP .

option

enable

Option	Description
enable	Enable use of LEDs on WTP.
disable	Disable use of LEDs on WTP.

led-schedules <name>

Schedule name.

string

Maximum length: 35

dtls-policy

WTP data channel DTLS policy .

option

clear-text

Option	Description
clear-text	Clear Text Data Channel.
dtls-enabled	DTLS Enabled Data Channel.
ipsec-vpn	IPsec VPN Data Channel.

dtls-in-kernel

Enable/disable data channel DTLS in kernel.

option

disable

Option	Description
enable	Enable data channel DTLS in kernel.
disable	Disable data channel DTLS in kernel.

max-clients

Maximum number of stations .

integer

Minimum value: 0 Maximum value: 4294967295

handoff-rssi

Minimum received signal strength indicator .

integer

Minimum value: 20 Maximum value: 30

handoff-sta-thresh

Threshold value for AP handoff.

integer

Minimum value: 5 Maximum value: 60

handoff-roaming

Enable/disable client load balancing during roaming to avoid roaming delay .

option

enable

Option	Description
enable	Enable handoff roaming.
disable	Disable handoff roaming.

ap-country

Country in which this WTP, FortiAP, or AP will operate .

option

Option	Description
--	NO_COUNTRY_SET
AF	AFGHANISTAN
AL	ALBANIA
DZ	ALGERIA
AS	AMERICAN SAMOA
AO	ANGOLA
AR	ARGENTINA
AM	ARMENIA
AU	AUSTRALIA
AT	AUSTRIA
AZ	AZERBAIJAN
BS	BAHAMAS
BH	BAHRAIN
BD	BANGLADESH
BB	BARBADOS
BY	BELARUS
BE	BELGIUM
BZ	BELIZE
BJ	BENIN
BM	BERMUDA
BT	BHUTAN
BO	BOLIVIA
BA	BOSNIA AND HERZEGOVINA
BW	BOTSWANA
BR	BRAZIL
BN	BRUNEI DARUSSALAM
BG	BULGARIA
BF	BURKINA-FASO
KH	CAMBODIA
CM	CAMEROON
KY	CAYMAN ISLANDS
CF	CENTRAL AFRICA REPUBLIC
TD	CHAD
CL	CHILE
CN	CHINA
CX	CHRISTMAS ISLAND
CO	COLOMBIA
CG	CONGO REPUBLIC
CD	DEMOCRATIC REPUBLIC OF CONGO
CR	COSTA RICA
HR	CROATIA
CY	CYPRUS
CZ	CZECH REPUBLIC
DK	DENMARK
DM	DOMINICA
DO	DOMINICAN REPUBLIC
EC	ECUADOR
EG	EGYPT
SV	EL SALVADOR
ET	ETHIOPIA
EE	ESTONIA
GF	FRENCH GUIANA
PF	FRENCH POLYNESIA
FO	FAEROE ISLANDS
FJ	FIJI
FI	FINLAND
FR	FRANCE
GE	GEORGIA
DE	GERMANY
GH	GHANA
GI	GIBRALTAR
GR	GREECE
GL	GREENLAND
GD	GRENADA
GP	GUADELOUPE
GU	GUAM
GT	GUATEMALA
GY	GUYANA
HT	HAITI
HN	HONDURAS
HK	HONG KONG
HU	HUNGARY
IS	ICELAND
IN	INDIA
ID	INDONESIA
IQ	IRAQ
IE	IRELAND
IM	ISLE OF MAN
IL	ISRAEL
IT	ITALY
CI	COTE_D_IVOIRE
JM	JAMAICA
JO	JORDAN
KZ	KAZAKHSTAN
KE	KENYA
KR	KOREA REPUBLIC
KW	KUWAIT
LA	LAOS
LV	LATVIA
LB	LEBANON
LS	LESOTHO
LY	LIBYA
LI	LIECHTENSTEIN
LT	LITHUANIA
LU	LUXEMBOURG
MO	MACAU SAR
MK	MACEDONIA, FYRO
MG	MADAGASCAR
MW	MALAWI
MY	MALAYSIA
MV	MALDIVES
ML	MALI
MT	MALTA
MH	MARSHALL ISLANDS
MQ	MARTINIQUE
MR	MAURITANIA
MU	MAURITIUS
YT	MAYOTTE
MX	MEXICO
FM	MICRONESIA
MD	REPUBLIC OF MOLDOVA
MC	MONACO
MA	MOROCCO
MZ	MOZAMBIQUE
MM	MYANMAR
NA	NAMIBIA
NP	NEPAL
NL	NETHERLANDS
AN	NETHERLANDS ANTILLES
AW	ARUBA
NZ	NEW ZEALAND
NI	NICARAGUA
NE	NIGER
NO	NORWAY
MP	NORTHERN MARIANA ISLANDS
OM	OMAN
PK	PAKISTAN
PW	PALAU
PA	PANAMA
PG	PAPUA NEW GUINEA
PY	PARAGUAY
PE	PERU
PH	PHILIPPINES
PL	POLAND
PT	PORTUGAL
PR	PUERTO RICO
QA	QATAR
RE	REUNION
RO	ROMANIA
RU	RUSSIA
RW	RWANDA
BL	SAINT BARTHELEMY
KN	SAINT KITTS AND NEVIS
LC	SAINT LUCIA
MF	SAINT MARTIN
PM	SAINT PIERRE AND MIQUELON
VC	SAINT VINCENT AND GRENADIENS
SA	SAUDI ARABIA
SN	SENEGAL
RS	REPUBLIC OF SERBIA
ME	MONTENEGRO
SL	SIERRA LEONE
SG	SINGAPORE
SK	SLOVAKIA
SI	SLOVENIA
ZA	SOUTH AFRICA
ES	SPAIN
LK	SRI LANKA
SE	SWEDEN
SR	SURINAME
CH	SWITZERLAND
TW	TAIWAN
TZ	TANZANIA
TH	THAILAND
TG	TOGO
TT	TRINIDAD AND TOBAGO
TN	TUNISIA
TR	TURKEY
TM	TURKMENISTAN
AE	UNITED ARAB EMIRATES
TC	TURKS AND CAICOS
UG	UGANDA
UA	UKRAINE
GB	UNITED KINGDOM
US	UNITED STATES2
PS	UNITED STATES (PUBLIC SAFETY)
UY	URUGUAY
UZ	UZBEKISTAN
VU	VANUATU
VE	VENEZUELA
VN	VIET NAM
VI	VIRGIN ISLANDS
WF	WALLIS AND FUTUNA
YE	YEMEN
ZM	ZAMBIA
ZW	ZIMBABWE
JP	JAPAN14
CA	CANADA2

ip-fragment-preventing

Method.

option

tcp-mss-adjust

Option	Description
tcp-mss-adjust	TCP maximum segment size adjustment.
icmp-unreachable	Drop packet and send ICMP Destination Unreachable

tun-mtu-uplink

The maximum transmission unit .

integer

Minimum value: 576 Maximum value: 1500

tun-mtu-downlink

The MTU of downlink CAPWAP tunnel .

integer

Minimum value: 576 Maximum value: 1500

split-tunneling-acl-path

Split tunneling ACL path is local/tunnel.

option

local

Option	Description
tunnel	Split tunneling ACL list traffic will be tunnel.
local	Split tunneling ACL list traffic will be local NATed.

split-tunneling-acl-local-ap-subnet

Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL .

option

disable

Option	Description
enable	Enable automatically adding local subnetwork of FortiAP to split-tunneling ACL.
disable	Disable automatically adding local subnetwork of FortiAP to split-tunneling ACL.

allowaccess

Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space.

option

Option	Description
https	HTTPS access.
ssh	SSH access.
snmp	SNMP access.

Change or reset the administrator password of a managed WTP, FortiAP or AP .

option

Option	Description
yes	Change the managed WTP, FortiAP or AP's administrator password. Use the login-password option to set the password.
default	Keep the managed WTP, FortiAP or AP's administrator password set to the factory default.
no	Do not change the managed WTP, FortiAP or AP's administrator password.

Set the managed WTP, FortiAP, or AP's administrator password.

password

Not Specified

lldp

Enable/disable Link Layer Discovery Protocol .

option

enable

Option	Description
enable	Enable LLDP.
disable	Disable LLDP.

poe-mode

Set the WTP, FortiAP, or AP's PoE mode.

option

auto

Option	Description
auto	Automatically detect the PoE mode.
8023af	Use 802.3af PoE mode.
8023at	Use 802.3at PoE mode.
power-adapter	Use the power adapter to control the PoE mode.
full	Use full power mode.
high	Use high power mode.
low	Use low power mode.

frequency-handoff

Enable/disable frequency handoff of clients to other channels .

option

disable

Option	Description
enable	Enable frequency handoff.
disable	Disable frequency handoff.

ap-handoff

Enable/disable AP handoff of clients to other APs .

option

disable

Option	Description
enable	Enable AP handoff.
disable	Disable AP handoff.

ext-info-enable

Enable/disable station/VAP/radio extension information.

option

enable

Option	Description
enable	Enable station/VAP/radio extension information.
disable	Disable station/VAP/radio extension information.

indoor-outdoor-deployment

Set to allow indoor/outdoor-only channels under regulatory rules .

option

platform-determined

Option	Description
platform-determined	Set AP deployment type based on its platform.
outdoor	Set AP deployment type to outdoor.
indoor	Set AP deployment type to indoor.

console-login

Enable/disable FortiAP console login access .

option

enable

Option	Description
enable	Enable FAP console login access.
disable	Disable FAP console login access.

wan-port-auth

Set WAN port authentication mode .

option

none

Option	Description
none	Disable WAN port authentication.
802.1x	Enable WAN port 802.1x authentication.

wan-port-auth-usrname

Set WAN port 802.1x supplicant user name.

string

Not Specified

wan-port-auth-password

Set WAN port 802.1x supplicant password.

password

Not Specified

wan-port-auth-methods

WAN port 802.1x supplicant EAP methods .

option

all

Option	Description
all	Do not specify any EAP methods.
EAP-FAST	Enable EAP-FAST.
EAP-TLS	Enable EAP-TLS.
EAP-PEAP	Enable EAP-PEAP.

config platform

Parameter

Description

Type

Size

Default

type

WTP, FortiAP or AP platform type. There are built-in WTP profiles for all supported FortiAP models. You can select a built-in profile and customize it or create a new profile.

option

221E

Option	Description
AP-11N	Default 11n AP.
220B	FAP220B/221B.
210B	FAP210B.
222B	FAP222B.
112B	FAP112B.
320B	FAP320B.
11C	FAP11C.
14C	FAP14C.
223B	FAP223B.
28C	FAP28C.
320C	FAP320C.
221C	FAP221C.
25D	FAP25D.
222C	FAP222C.
224D	FAP224D.
214B	FK214B.
21D	FAP21D.
24D	FAP24D.
112D	FAP112D.
223C	FAP223C.
321C	FAP321C.
C220C	FAPC220C.
C225C	FAPC225C.
C23JD	FAPC23JD.
C24JE	FAPC24JE.
S321C	FAPS321C.
S322C	FAPS322C.
S323C	FAPS323C.
S311C	FAPS311C.
S313C	FAPS313C.
S321CR	FAPS321CR.
S322CR	FAPS322CR.
S323CR	FAPS323CR.
S421E	FAPS421E.
S422E	FAPS422E.
S423E	FAPS423E.
421E	FAP421E.
423E	FAP423E.
221E	FAP221E.
222E	FAP222E.
223E	FAP223E.
224E	FAP224E.
231E	FAP231E.
S221E	FAPS221E.
S223E	FAPS223E.
321E	FAP321E.
431F	FAP431F.
431FL	FAP431FL.
432F	FAP432F.
432FR	FAP432FR.
433F	FAP433F.
433FL	FAP433FL.
231F	FAP231F.
231FL	FAP231FL.
234F	FAP234F.
23JF	FAP23JF.
831F	FAP831F.
231G	FAP231G.
233G	FAP233G.
431G	FAP431G.
433G	FAP433G.
U421E	FAPU421EV.
U422EV	FAPU422EV.
U423E	FAPU423EV.
U221EV	FAPU221EV.
U223EV	FAPU223EV.
U24JEV	FAPU24JEV.
U321EV	FAPU321EV.
U323EV	FAPU323EV.
U431F	FAPU431F.
U433F	FAPU433F.
U231F	FAPU231F.
U234F	FAPU234F.
U432F	FAPU432F.

mode

Configure operation mode of 5G radios .

option

single-5G

Option	Description
single-5G	Configure radios as one 5GHz band, one 2.4GHz band, and one dedicated monitor or sniffer.
dual-5G	Configure radios as one lower 5GHz band, one higher 5GHz band and one 2.4GHz band respectively.

ddscan

Enable/disable use of one radio for dedicated full-band scanning to detect RF characterization and wireless threat management.

option

disable

Option	Description
enable	Enable dedicated full-band scan mode.
disable	Disable dedicated full-band scan mode.

config lan

Parameter

Description

Type

Size

Default

port-mode

LAN port mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port-ssid

Bridge LAN port to SSID.

string

Not Specified

port1-mode

LAN port 1 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port1-ssid

Bridge LAN port 1 to SSID.

string

Not Specified

port2-mode

LAN port 2 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port2-ssid

Bridge LAN port 2 to SSID.

string

Not Specified

port3-mode

LAN port 3 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port3-ssid

Bridge LAN port 3 to SSID.

string

Not Specified

port4-mode

LAN port 4 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port4-ssid

Bridge LAN port 4 to SSID.

string

Not Specified

port5-mode

LAN port 5 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port5-ssid

Bridge LAN port 5 to SSID.

string

Not Specified

port6-mode

LAN port 6 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port6-ssid

Bridge LAN port 6 to SSID.

string

Not Specified

port7-mode

LAN port 7 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port7-ssid

Bridge LAN port 7 to SSID.

string

Not Specified

port8-mode

LAN port 8 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port8-ssid

Bridge LAN port 8 to SSID.

string

Not Specified

port-esl-mode

ESL port mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP ESL port to WTP WAN port.
bridge-to-wan	Bridge WTP ESL port to WTP WAN port.
bridge-to-ssid	Bridge WTP ESL port to SSID.

port-esl-ssid

Bridge ESL port to SSID.

string

Not Specified

config deny-mac-list

Parameter	Description	Type	Size	Default
mac	A WiFi device with this MAC address is denied access to this WTP, FortiAP or AP.	mac-address	Not Specified	00:00:00:00:00:00

config split-tunneling-acl

Parameter	Description	Type	Size	Default
dest-ip	Destination IP and mask for the split-tunneling subnet.	ipv4-classnet	Not Specified	0.0.0.0 0.0.0.0

config radio-1

Parameter

Description

Type

Size

Default

mode

Mode of radio 1. Radio 1 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

option

Option	Description
disabled	Radio 1 is disabled.
ap	Radio 1 operates as an access point that allows WiFi clients to connect to your network.
monitor	Radio 1 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer	Radio 1 operates as a sniffer capturing WiFi frames on air.
sam	Radio 1 operates as a station that can connect to a neighboring AP for connectivity and health check.

band

WiFi band that Radio 1 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11ax-6G	802.11ax at 6GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

5g-full

Option	Description
5g-full	Full 5G band.
5g-high	High 5G band.
5g-low	Low 5G band.

drma

Enable/disable dynamic radio mode assignment .

option

disable

Option	Description
disable	Disable dynamic radio mode assignment (DRMA).
enable	Enable dynamic radio mode assignment (DRMA).

drma-sensitivity

Network Coverage Factor .

option

low

Option	Description
low	Consider a radio as redundant when its NCF is 100%.
medium	Consider a radio as redundant when its NCF is 95%.
high	Consider a radio as redundant when its NCF is 90%.

airtime-fairness

Enable/disable airtime fairness .

option

disable

Option	Description
enable	Enable airtime fairness (ATF) support.
disable	Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

disable

Option	Description
rtscts	Enable 802.11g protection RTS/CTS mode.
ctsonly	Enable 802.11g protection CTS only mode.
disable	Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

Option	Description
tim	TIM bit for client in power save mode.
ac-vo	Use AC VO priority to send out packets in the power save queue.
no-obss-scan	Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate	Do not send frame using 11b data rate.
client-rate-follow	Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

power-save aggr-limit retry-limit send-bar

Option	Description
disable	Disable packet transmission optimization.
power-save	Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit	Set aggregation limit to a lower value when data rate is low.
retry-limit	Set software retry limit to a lower value when data rate is low.
send-bar	Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

enable

Option	Description
enable	Enable AMSDU support.
disable	Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

enable

Option	Description
enable	Enable support for both HT20 and HT40 on the same radio.
disable	Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

enable

Option	Description
enable	Enable zero wait DFS
disable	Disable zero wait DFS

bss-color

BSS color value for this 11ax radio .

integer

Minimum value: 0 Maximum value: 63

bss-color-mode

BSS color mode for this 11ax radio .

option

auto

Option	Description
auto	Automatically select BSS color value on AP.
static	Set BSS color value on this radio based on 'bss-color' CLI.

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

disable

Option	Description
enable	Select the 400 ns short guard interval (Short GI).
disable	Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

20MHz

Option	Description
160MHz	160 MHz channel width.
80MHz	80 MHz channel width.
40MHz	40 MHz channel width.
20MHz	20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

Target of automatic transmit power adjustment in dBm .

string

Not Specified

-70

power-mode

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

integer

Minimum value: 0 Maximum value: 65535

100

80211d

Enable/disable 802.11d countryie.

option

enable

Option	Description
enable	Enable 802.11d countryie.
disable	Disable 802.11d countryie.

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

00:00:00:00:00:00

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management beacon frame.
disable	Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management probe frame.
disable	Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management other frame.
disable	Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi control frame.
disable	Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi data frame
disable	Disable sniffer on WiFi data frame

sam-ssid

SSID for WiFi network.

string

Not Specified

sam-bssid

BSSID for WiFi network.

mac-address

Not Specified

00:00:00:00:00:00

sam-security-type

Select WiFi network security type .

option

wpa-personal

Option	Description
open	Open.
wpa-personal	WPA/WPA2 personal.
wpa-enterprise	WPA/WPA2 enterprise.

sam-captive-portal

Enable/disable Captive Portal Authentication .

option

disable

Option	Description
enable	Enable Captive Portal Authentication.
disable	Disable Captive Portal Authentication.

sam-cwp-username

Username for captive portal authentication.

string

Not Specified

sam-cwp-password

Password for captive portal authentication.

password

Not Specified

sam-cwp-test-url

Website the client is trying to access.

string

Not Specified

sam-cwp-match-string

Identification string from the captive portal login form.

string

Not Specified

sam-cwp-success-string

Success identification on the page after a successful login.

string

Not Specified

sam-cwp-failure-string

Failure identification on the page after an incorrect login.

string

Not Specified

sam-username

Username for WiFi network connection.

string

Not Specified

sam-password

Passphrase for WiFi network connection.

password

Not Specified

sam-test

Select SAM test type .

option

ping

Option	Description
ping	PING test.
iperf	IPERF test.

sam-server-type

Select SAM server type .

option

Option	Description
ip	IPv4 address.
fqdn	Fully Qualified Domain Name address.

sam-server-ip

SAM test server IP address.

ipv4-address

Not Specified

0.0.0.0

sam-server-fqdn

SAM test server domain name.

string

Not Specified

iperf-server-port

Iperf service port number.

integer

Minimum value: 0 Maximum value: 65535

5001

iperf-protocol

Iperf test protocol .

option

udp

Option	Description
udp	UDP.
tcp	TCP.

sam-report-intv

SAM report interval (sec), 0 for a one-time report.

integer

Minimum value: 60 Maximum value: 864000

channel-utilization

Enable/disable measuring channel utilization.

option

enable

Option	Description
enable	Enable measuring channel utilization.
disable	Disable measuring channel utilization.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Not Specified

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

disable

Option	Description
enable	Enable distributed automatic radio resource provisioning.
disable	Disable distributed automatic radio resource provisioning.

arrp-profile

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio.

string

Not Specified

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

disable

Option	Description
enable	Enable WMM call admission control.
disable	Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

option

disable

Option	Description
enable	Enable WMM bandwidth admission control.
disable	Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

2000

config radio-2

Parameter

Description

Type

Size

Default

mode

Mode of radio 2. Radio 2 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

option

Option	Description
disabled	Radio 2 is disabled.
ap	Radio 2 operates as an access point that allows WiFi clients to connect to your network.
monitor	Radio 2 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer	Radio 2 operates as a sniffer capturing WiFi frames on air.
sam	Radio 2 operates as a station that can connect to a neighboring AP for connectivity and health check.

band

WiFi band that Radio 2 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11ax-6G	802.11ax at 6GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

5g-full

Option	Description
5g-full	Full 5G band.
5g-high	High 5G band.
5g-low	Low 5G band.

drma

Enable/disable dynamic radio mode assignment .

option

disable

Option	Description
disable	Disable dynamic radio mode assignment (DRMA).
enable	Enable dynamic radio mode assignment (DRMA).

drma-sensitivity

Network Coverage Factor .

option

low

Option	Description
low	Consider a radio as redundant when its NCF is 100%.
medium	Consider a radio as redundant when its NCF is 95%.
high	Consider a radio as redundant when its NCF is 90%.

airtime-fairness

Enable/disable airtime fairness .

option

disable

Option	Description
enable	Enable airtime fairness (ATF) support.
disable	Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

disable

Option	Description
rtscts	Enable 802.11g protection RTS/CTS mode.
ctsonly	Enable 802.11g protection CTS only mode.
disable	Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

Option	Description
tim	TIM bit for client in power save mode.
ac-vo	Use AC VO priority to send out packets in the power save queue.
no-obss-scan	Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate	Do not send frame using 11b data rate.
client-rate-follow	Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

power-save aggr-limit retry-limit send-bar

Option	Description
disable	Disable packet transmission optimization.
power-save	Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit	Set aggregation limit to a lower value when data rate is low.
retry-limit	Set software retry limit to a lower value when data rate is low.
send-bar	Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

enable

Option	Description
enable	Enable AMSDU support.
disable	Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

enable

Option	Description
enable	Enable support for both HT20 and HT40 on the same radio.
disable	Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

enable

Option	Description
enable	Enable zero wait DFS
disable	Disable zero wait DFS

bss-color

BSS color value for this 11ax radio .

integer

Minimum value: 0 Maximum value: 63

bss-color-mode

BSS color mode for this 11ax radio .

option

auto

Option	Description
auto	Automatically select BSS color value on AP.
static	Set BSS color value on this radio based on 'bss-color' CLI.

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

disable

Option	Description
enable	Select the 400 ns short guard interval (Short GI).
disable	Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

20MHz

Option	Description
160MHz	160 MHz channel width.
80MHz	80 MHz channel width.
40MHz	40 MHz channel width.
20MHz	20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

Target of automatic transmit power adjustment in dBm .

string

Not Specified

-70

power-mode

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

integer

Minimum value: 0 Maximum value: 65535

100

80211d

Enable/disable 802.11d countryie.

option

enable

Option	Description
enable	Enable 802.11d countryie.
disable	Disable 802.11d countryie.

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

00:00:00:00:00:00

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management beacon frame.
disable	Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management probe frame.
disable	Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management other frame.
disable	Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi control frame.
disable	Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi data frame
disable	Disable sniffer on WiFi data frame

sam-ssid

SSID for WiFi network.

string

Not Specified

sam-bssid

BSSID for WiFi network.

mac-address

Not Specified

00:00:00:00:00:00

sam-security-type

Select WiFi network security type .

option

wpa-personal

Option	Description
open	Open.
wpa-personal	WPA/WPA2 personal.
wpa-enterprise	WPA/WPA2 enterprise.

sam-captive-portal

Enable/disable Captive Portal Authentication .

option

disable

Option	Description
enable	Enable Captive Portal Authentication.
disable	Disable Captive Portal Authentication.

sam-cwp-username

Username for captive portal authentication.

string

Not Specified

sam-cwp-password

Password for captive portal authentication.

password

Not Specified

sam-cwp-test-url

Website the client is trying to access.

string

Not Specified

sam-cwp-match-string

Identification string from the captive portal login form.

string

Not Specified

sam-cwp-success-string

Success identification on the page after a successful login.

string

Not Specified

sam-cwp-failure-string

Failure identification on the page after an incorrect login.

string

Not Specified

sam-username

Username for WiFi network connection.

string

Not Specified

sam-password

Passphrase for WiFi network connection.

password

Not Specified

sam-test

Select SAM test type .

option

ping

Option	Description
ping	PING test.
iperf	IPERF test.

sam-server-type

Select SAM server type .

option

Option	Description
ip	IPv4 address.
fqdn	Fully Qualified Domain Name address.

sam-server-ip

SAM test server IP address.

ipv4-address

Not Specified

0.0.0.0

sam-server-fqdn

SAM test server domain name.

string

Not Specified

iperf-server-port

Iperf service port number.

integer

Minimum value: 0 Maximum value: 65535

5001

iperf-protocol

Iperf test protocol .

option

udp

Option	Description
udp	UDP.
tcp	TCP.

sam-report-intv

SAM report interval (sec), 0 for a one-time report.

integer

Minimum value: 60 Maximum value: 864000

channel-utilization

Enable/disable measuring channel utilization.

option

enable

Option	Description
enable	Enable measuring channel utilization.
disable	Disable measuring channel utilization.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Not Specified

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

disable

Option	Description
enable	Enable distributed automatic radio resource provisioning.
disable	Disable distributed automatic radio resource provisioning.

arrp-profile

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio.

string

Not Specified

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

disable

Option	Description
enable	Enable WMM call admission control.
disable	Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

option

disable

Option	Description
enable	Enable WMM bandwidth admission control.
disable	Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

2000

config radio-3

Parameter

Description

Type

Size

Default

mode

Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

option

Option	Description
disabled	Radio 3 is disabled.
ap	Radio 3 operates as an access point that allows WiFi clients to connect to your network.
monitor	Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer	Radio 3 operates as a sniffer capturing WiFi frames on air.
sam	Radio 3 operates as a station that can connect to a neighboring AP for connectivity and health check.

band

WiFi band that Radio 3 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11ax-6G	802.11ax at 6GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

5g-full

Option	Description
5g-full	Full 5G band.
5g-high	High 5G band.
5g-low	Low 5G band.

drma

Enable/disable dynamic radio mode assignment .

option

disable

Option	Description
disable	Disable dynamic radio mode assignment (DRMA).
enable	Enable dynamic radio mode assignment (DRMA).

drma-sensitivity

Network Coverage Factor .

option

low

Option	Description
low	Consider a radio as redundant when its NCF is 100%.
medium	Consider a radio as redundant when its NCF is 95%.
high	Consider a radio as redundant when its NCF is 90%.

airtime-fairness

Enable/disable airtime fairness .

option

disable

Option	Description
enable	Enable airtime fairness (ATF) support.
disable	Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

disable

Option	Description
rtscts	Enable 802.11g protection RTS/CTS mode.
ctsonly	Enable 802.11g protection CTS only mode.
disable	Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

Option	Description
tim	TIM bit for client in power save mode.
ac-vo	Use AC VO priority to send out packets in the power save queue.
no-obss-scan	Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate	Do not send frame using 11b data rate.
client-rate-follow	Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

power-save aggr-limit retry-limit send-bar

Option	Description
disable	Disable packet transmission optimization.
power-save	Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit	Set aggregation limit to a lower value when data rate is low.
retry-limit	Set software retry limit to a lower value when data rate is low.
send-bar	Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

enable

Option	Description
enable	Enable AMSDU support.
disable	Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

enable

Option	Description
enable	Enable support for both HT20 and HT40 on the same radio.
disable	Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

enable

Option	Description
enable	Enable zero wait DFS
disable	Disable zero wait DFS

bss-color

BSS color value for this 11ax radio .

integer

Minimum value: 0 Maximum value: 63

bss-color-mode

BSS color mode for this 11ax radio .

option

auto

Option	Description
auto	Automatically select BSS color value on AP.
static	Set BSS color value on this radio based on 'bss-color' CLI.

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

disable

Option	Description
enable	Select the 400 ns short guard interval (Short GI).
disable	Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

20MHz

Option	Description
160MHz	160 MHz channel width.
80MHz	80 MHz channel width.
40MHz	40 MHz channel width.
20MHz	20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

Target of automatic transmit power adjustment in dBm .

string

Not Specified

-70

power-mode

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

integer

Minimum value: 0 Maximum value: 65535

100

80211d

Enable/disable 802.11d countryie.

option

enable

Option	Description
enable	Enable 802.11d countryie.
disable	Disable 802.11d countryie.

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

00:00:00:00:00:00

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management beacon frame.
disable	Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management probe frame.
disable	Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management other frame.
disable	Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi control frame.
disable	Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi data frame
disable	Disable sniffer on WiFi data frame

sam-ssid

SSID for WiFi network.

string

Not Specified

sam-bssid

BSSID for WiFi network.

mac-address

Not Specified

00:00:00:00:00:00

sam-security-type

Select WiFi network security type .

option

wpa-personal

Option	Description
open	Open.
wpa-personal	WPA/WPA2 personal.
wpa-enterprise	WPA/WPA2 enterprise.

sam-captive-portal

Enable/disable Captive Portal Authentication .

option

disable

Option	Description
enable	Enable Captive Portal Authentication.
disable	Disable Captive Portal Authentication.

sam-cwp-username

Username for captive portal authentication.

string

Not Specified

sam-cwp-password

Password for captive portal authentication.

password

Not Specified

sam-cwp-test-url

Website the client is trying to access.

string

Not Specified

sam-cwp-match-string

Identification string from the captive portal login form.

string

Not Specified

sam-cwp-success-string

Success identification on the page after a successful login.

string

Not Specified

sam-cwp-failure-string

Failure identification on the page after an incorrect login.

string

Not Specified

sam-username

Username for WiFi network connection.

string

Not Specified

sam-password

Passphrase for WiFi network connection.

password

Not Specified

sam-test

Select SAM test type .

option

ping

Option	Description
ping	PING test.
iperf	IPERF test.

sam-server-type

Select SAM server type .

option

Option	Description
ip	IPv4 address.
fqdn	Fully Qualified Domain Name address.

sam-server-ip

SAM test server IP address.

ipv4-address

Not Specified

0.0.0.0

sam-server-fqdn

SAM test server domain name.

string

Not Specified

iperf-server-port

Iperf service port number.

integer

Minimum value: 0 Maximum value: 65535

5001

iperf-protocol

Iperf test protocol .

option

udp

Option	Description
udp	UDP.
tcp	TCP.

sam-report-intv

SAM report interval (sec), 0 for a one-time report.

integer

Minimum value: 60 Maximum value: 864000

channel-utilization

Enable/disable measuring channel utilization.

option

enable

Option	Description
enable	Enable measuring channel utilization.
disable	Disable measuring channel utilization.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Not Specified

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

disable

Option	Description
enable	Enable distributed automatic radio resource provisioning.
disable	Disable distributed automatic radio resource provisioning.

arrp-profile

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio.

string

Not Specified

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

disable

Option	Description
enable	Enable WMM call admission control.
disable	Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

option

disable

Option	Description
enable	Enable WMM bandwidth admission control.
disable	Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

2000

config radio-4

Parameter

Description

Type

Size

Default

mode

Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

option

Option	Description
disabled	Radio 3 is disabled.
ap	Radio 3 operates as an access point that allows WiFi clients to connect to your network.
monitor	Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer	Radio 3 operates as a sniffer capturing WiFi frames on air.
sam	Radio 3 operates as a station that can connect to a neighboring AP for connectivity and health check.

band

WiFi band that Radio 3 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11ax-6G	802.11ax at 6GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

5g-full

Option	Description
5g-full	Full 5G band.
5g-high	High 5G band.
5g-low	Low 5G band.

drma

Enable/disable dynamic radio mode assignment .

option

disable

Option	Description
disable	Disable dynamic radio mode assignment (DRMA).
enable	Enable dynamic radio mode assignment (DRMA).

drma-sensitivity

Network Coverage Factor .

option

low

Option	Description
low	Consider a radio as redundant when its NCF is 100%.
medium	Consider a radio as redundant when its NCF is 95%.
high	Consider a radio as redundant when its NCF is 90%.

airtime-fairness

Enable/disable airtime fairness .

option

disable

Option	Description
enable	Enable airtime fairness (ATF) support.
disable	Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

disable

Option	Description
rtscts	Enable 802.11g protection RTS/CTS mode.
ctsonly	Enable 802.11g protection CTS only mode.
disable	Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

Option	Description
tim	TIM bit for client in power save mode.
ac-vo	Use AC VO priority to send out packets in the power save queue.
no-obss-scan	Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate	Do not send frame using 11b data rate.
client-rate-follow	Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

power-save aggr-limit retry-limit send-bar

Option	Description
disable	Disable packet transmission optimization.
power-save	Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit	Set aggregation limit to a lower value when data rate is low.
retry-limit	Set software retry limit to a lower value when data rate is low.
send-bar	Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

enable

Option	Description
enable	Enable AMSDU support.
disable	Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

enable

Option	Description
enable	Enable support for both HT20 and HT40 on the same radio.
disable	Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

enable

Option	Description
enable	Enable zero wait DFS
disable	Disable zero wait DFS

bss-color

BSS color value for this 11ax radio .

integer

Minimum value: 0 Maximum value: 63

bss-color-mode

BSS color mode for this 11ax radio .

option

auto

Option	Description
auto	Automatically select BSS color value on AP.
static	Set BSS color value on this radio based on 'bss-color' CLI.

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

disable

Option	Description
enable	Select the 400 ns short guard interval (Short GI).
disable	Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

20MHz

Option	Description
160MHz	160 MHz channel width.
80MHz	80 MHz channel width.
40MHz	40 MHz channel width.
20MHz	20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

Target of automatic transmit power adjustment in dBm .

string

Not Specified

-70

power-mode

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

integer

Minimum value: 0 Maximum value: 65535

100

80211d

Enable/disable 802.11d countryie.

option

enable

Option	Description
enable	Enable 802.11d countryie.
disable	Disable 802.11d countryie.

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

00:00:00:00:00:00

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management beacon frame.
disable	Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management probe frame.
disable	Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

enable

Option	Description
enable	Enable sniffer on WiFi management other frame.
disable	Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi control frame.
disable	Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

enable

Option	Description
enable	Enable sniffer on WiFi data frame
disable	Disable sniffer on WiFi data frame

sam-ssid

SSID for WiFi network.

string

Not Specified

sam-bssid

BSSID for WiFi network.

mac-address

Not Specified

00:00:00:00:00:00

sam-security-type

Select WiFi network security type .

option

wpa-personal

Option	Description
open	Open.
wpa-personal	WPA/WPA2 personal.
wpa-enterprise	WPA/WPA2 enterprise.

sam-captive-portal

Enable/disable Captive Portal Authentication .

option

disable

Option	Description
enable	Enable Captive Portal Authentication.
disable	Disable Captive Portal Authentication.

sam-cwp-username

Username for captive portal authentication.

string

Not Specified

sam-cwp-password

Password for captive portal authentication.

password

Not Specified

sam-cwp-test-url

Website the client is trying to access.

string

Not Specified

sam-cwp-match-string

Identification string from the captive portal login form.

string

Not Specified

sam-cwp-success-string

Success identification on the page after a successful login.

string

Not Specified

sam-cwp-failure-string

Failure identification on the page after an incorrect login.

string

Not Specified

sam-username

Username for WiFi network connection.

string

Not Specified

sam-password

Passphrase for WiFi network connection.

password

Not Specified

sam-test

Select SAM test type .

option

ping

Option	Description
ping	PING test.
iperf	IPERF test.

sam-server-type

Select SAM server type .

option

Option	Description
ip	IPv4 address.
fqdn	Fully Qualified Domain Name address.

sam-server-ip

SAM test server IP address.

ipv4-address

Not Specified

0.0.0.0

sam-server-fqdn

SAM test server domain name.

string

Not Specified

iperf-server-port

Iperf service port number.

integer

Minimum value: 0 Maximum value: 65535

5001

iperf-protocol

Iperf test protocol .

option

udp

Option	Description
udp	UDP.
tcp	TCP.

sam-report-intv

SAM report interval (sec), 0 for a one-time report.

integer

Minimum value: 60 Maximum value: 864000

channel-utilization

Enable/disable measuring channel utilization.

option

enable

Option	Description
enable	Enable measuring channel utilization.
disable	Disable measuring channel utilization.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Not Specified

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

disable

Option	Description
enable	Enable distributed automatic radio resource provisioning.
disable	Disable distributed automatic radio resource provisioning.

arrp-profile

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio.

string

Not Specified

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

disable

Option	Description
enable	Enable WMM call admission control.
disable	Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

option

disable

Option	Description
enable	Enable WMM bandwidth admission control.
disable	Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

2000

config lbs

Parameter

Description

Type

Size

Default

ekahau-blink-mode

Enable/disable Ekahau blink mode .

option

disable

Option	Description
enable	Enable Ekahau blink mode.
disable	Disable Ekahau blink mode.

ekahau-tag

WiFi frame MAC address or WiFi Tag.

mac-address

Not Specified

01:18:8e:00:00:00

erc-server-ip

IP address of Ekahau RTLS Controller (ERC).

ipv4-address-any

Not Specified

0.0.0.0

erc-server-port

Ekahau RTLS Controller (ERC) UDP listening port.

integer

Minimum value: 1024 Maximum value: 65535

8569

aeroscout

Enable/disable AeroScout Real Time Location Service .

option

disable

Option	Description
enable	Enable AeroScout support.
disable	Disable AeroScout support.

aeroscout-server-ip

IP address of AeroScout server.

ipv4-address-any

Not Specified

0.0.0.0

aeroscout-server-port

AeroScout server UDP listening port.

integer

Minimum value: 1024 Maximum value: 65535

aeroscout-mu

Enable/disable AeroScout Mobile Unit .

option

disable

Option	Description
enable	Enable AeroScout MU mode support.
disable	Disable AeroScout MU mode support.

aeroscout-ap-mac

Use BSSID or board MAC address as AP MAC address in AeroScout AP messages .

option

bssid

Option	Description
bssid	Use BSSID as AP MAC address in AeroScout AP messages.
board-mac	Use board MAC address as AP MAC address in AeroScout AP messages.

aeroscout-mmu-report

Enable/disable compounded AeroScout tag and MU report .

option

enable

Option	Description
enable	Enable compounded AeroScout tag and MU report.
disable	Disable compounded AeroScout tag and MU report.

aeroscout-mu-factor

AeroScout MU mode dilution factor .

integer

Minimum value: 0 Maximum value: 4294967295

aeroscout-mu-timeout

AeroScout MU mode timeout .

integer

Minimum value: 0 Maximum value: 65535

fortipresence

Enable/disable FortiPresence to monitor the location and activity of WiFi clients even if they don't connect to this WiFi network .

option

disable

Option	Description
foreign	FortiPresence monitors foreign channels only. Foreign channels mean all other available channels than the current operating channel of the WTP, AP, or FortiAP.
both	Enable FortiPresence on both foreign and home channels. Select this option to have FortiPresence monitor all WiFi channels.
disable	Disable FortiPresence.

fortipresence-server-addr-type

FortiPresence server address type .

option

ipv4

Option	Description
ipv4	IPv4 address.
fqdn	Fully Qualified Domain Name address.

fortipresence-server

IP address of FortiPresence server.

ipv4-address-any

Not Specified

0.0.0.0

fortipresence-server-fqdn

FQDN of FortiPresence server.

string

Not Specified

fortipresence-port

UDP listening port of FortiPresence server .

integer

Minimum value: 300 Maximum value: 65535

3000

fortipresence-secret

FortiPresence secret password (max. 16 characters).

password

Not Specified

fortipresence-project

FortiPresence project name .

string

Not Specified

fortipresence

fortipresence-frequency

FortiPresence report transmit frequency .

integer

Minimum value: 5 Maximum value: 65535

fortipresence-rogue

Enable/disable FortiPresence finding and reporting rogue APs.

option

disable

Option	Description
enable	Enable FortiPresence finding and reporting rogue APs.
disable	Disable FortiPresence finding and reporting rogue APs.

fortipresence-unassoc

Enable/disable FortiPresence finding and reporting unassociated stations.

option

enable

Option	Description
enable	Enable FortiPresence finding and reporting unassociated stations.
disable	Disable FortiPresence finding and reporting unassociated stations.

fortipresence-ble

Enable/disable FortiPresence finding and reporting BLE devices.

option

enable

Option	Description
enable	Enable FortiPresence finding and reporting BLE devices.
disable	Disable FortiPresence finding and reporting BLE devices.

station-locate

Enable/disable client station locating services for all clients, whether associated or not .

option

disable

Option	Description
enable	Enable station locating service.
disable	Disable station locating service.

config esl-ses-dongle

Parameter

Description

Type

Size

Default

compliance-level

Compliance levels for the ESL solution integration .

option

compliance-level-2

Option	Description
compliance-level-2	Compliance Level 2 - Full Cloud Support, IoT and Fast-Response.

scd-enable

Enable/disable ESL SES-imagotag Serial Communication Daemon .

option

disable

Option	Description
enable	Enable ESL SES-imagotag SCD.
disable	Disable ESL SES-imagotag SCD.

esl-channel

ESL SES-imagotag dongle channel .

option

127

Option	Description
-1	No esl-channel is set.
0	ESL channel 0.
1	ESL channel 1.
2	ESL channel 2.
3	ESL channel 3.
4	ESL channel 4.
5	ESL channel 5.
6	ESL channel 6.
7	ESL channel 7.
8	ESL channel 8.
9	ESL channel 9.
10	ESL channel 10.
127	Managed channel enabled, indicates that the APC (server) is setting the esl-channel via the slot channel

output-power

ESL SES-imagotag dongle output power .

option

Option	Description
a	About 15mW.
b	About 7mW.
c	About 5mW.
d	About 1mW.
e	About 13mW.
f	About 10mW.
g	About 3mW.
h	About 2mW.

apc-addr-type

ESL SES-imagotag APC address type .

option

fqdn

Option	Description
fqdn	Fully Qualified Domain Name address.
ip	IPv4 address.

apc-fqdn

FQDN of ESL SES-imagotag Access Point Controller (APC).

string

Not Specified

apc-ip

IP address of ESL SES-imagotag Access Point Controller (APC).

ipv4-address

Not Specified

0.0.0.0

apc-port

Port of ESL SES-imagotag Access Point Controller (APC).

integer

Minimum value: 0 Maximum value: 65535

coex-level

ESL SES-imagotag dongle coexistence level .

option

none

Option	Description
none	No support for coexistence of USB-Dongle with WiFi AP.

tls-cert-verification

Enable/disable TLS certificate verification .

option

enable

Option	Description
enable	Enable TLS Certificate verification.
disable	Disable TLS Certificate verification.

tls-fqdn-verification

Enable/disable TLS certificate verification .

option

disable

Option	Description
enable	Enable TLS FQDN verification.
disable	Disable TLS FQDN verification.

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

config wireless-controller wtp-profile

config wireless-controller wtp-profile

config wireless-controller wtp-profile

config platform

config lan

config deny-mac-list

config split-tunneling-acl

config radio-1

config radio-2

config radio-3

config radio-4

config lbs

config esl-ses-dongle