config firewall dnstranslation
Configure DNS translation.
config firewall dnstranslation
Description: Configure DNS translation.
edit <id>
set dst {ipv4-address}
set id {integer}
set netmask {ipv4-netmask}
set src {ipv4-address}
next
end
config firewall dnstranslation
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
dst |
IPv4 address or subnet on the external network to substitute for the resolved address in DNS query replies. Can be single IP address or subnet on the external network, but number of addresses must equal number of mapped IP addresses in src. |
ipv4-address |
Not Specified |
0.0.0.0 |
|
id |
ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
|
netmask |
If src and dst are subnets rather than single IP addresses, enter the netmask for both src and dst. |
ipv4-netmask |
Not Specified |
255.255.255.255 |
|
src |
IPv4 address or subnet on the internal network to compare with the resolved address in DNS query replies. If the resolved address matches, the resolved address is substituted with dst. |
ipv4-address |
Not Specified |
0.0.0.0 |