config system lte-modem

This command is available for reference model(s) FortiGate 140E-POE, FortiWiFi 61F, FortiGate 501E, FortiGate 3000D. It is not available for FortiGate VM64.

Configure USB LTE/WIMAX devices.

config system lte-modem

Description: Configure USB LTE/WIMAX devices.

set status [enable|disable]

set extra-init {string}

set authtype [none|pap|...]

set username {string}

set passwd {password}

set apn {string}

set modem-port {integer}

set mode [standalone|redundant]

set holddown-timer {integer}

set interface {string}

end

config system lte-modem

Parameter	Description	Type	Size	Default
status	Enable/disable USB LTE/WIMAX device.	option	-	disable
	Option Description enable Enable USB LTE/WIMA device. disable Disable USB LTE/WIMA device.
extra-init	Extra initialization string for USB LTE/WIMAX devices.	string	Maximum length: 127
authtype	Authentication type for PDP-IP packet data calls.	option	-	none
	Option Description none Username and password not required. pap Use PAP authentication. chap Use CHAP authentication.
username	Authentication username for PDP-IP packet data calls.	string	Maximum length: 63
passwd	Authentication password for PDP-IP packet data calls.	password	Not Specified
apn	Login APN string for PDP-IP packet data calls.	string	Maximum length: 127
modem-port	Modem port index .	integer	Minimum value: 0 Maximum value: 20	255
mode	Modem operation mode.	option	-	standalone
	Option Description standalone Standalone modem operation mode. redundant Redundant modem operation mode where the modem is used as a backup interface.
holddown-timer	Hold down timer .	integer	Minimum value: 10 Maximum value: 60	30
interface	The interface that the modem is acting as a redundant interface for.	string	Maximum length: 63