config wireless-controller snmp

Configure SNMP.

config wireless-controller snmp
    Description: Configure SNMP.
    config community
        Description: SNMP Community Configuration.
        edit <id>
            config hosts
                Description: Configure IPv4 SNMP managers (hosts).
                edit <id>
                    set ip {user}
                next
            end
            set name {string}
            set query-v1-status [enable|disable]
            set query-v2c-status [enable|disable]
            set status [enable|disable]
            set trap-v1-status [enable|disable]
            set trap-v2c-status [enable|disable]
        next
    end
    set contact-info {string}
    set engine-id {string}
    set trap-high-cpu-threshold {integer}
    set trap-high-mem-threshold {integer}
    config user
        Description: SNMP User Configuration.
        edit <name>
            set auth-proto [md5|sha]
            set auth-pwd {password}
            set notify-hosts {ipv4-address}
            set priv-proto [aes|des|...]
            set priv-pwd {password}
            set queries [enable|disable]
            set security-level [no-auth-no-priv|auth-no-priv|...]
            set status [enable|disable]
            set trap-status [enable|disable]
        next
    end
end

config wireless-controller snmp

Parameter	Description	Type	Size	Default
contact-info	Contact Information.	string	Maximum length: 31
engine-id	AC SNMP engineID string (maximum 24 characters).	string	Maximum length: 23
trap-high-cpu-threshold	CPU usage when trap is sent.	integer	Minimum value: 10 Maximum value: 100	80
trap-high-mem-threshold	Memory usage when trap is sent.	integer	Minimum value: 10 Maximum value: 100	80

config community

Parameter	Description	Type	Size	Default
id	Community ID.	integer	Minimum value: 0 Maximum value: 4294967295	0
name	Community name.	string	Maximum length: 35
query-v1-status	Enable/disable SNMP v1 queries.	option	-	enable
	Option Description enable Enable setting. disable Disable setting.
query-v2c-status	Enable/disable SNMP v2c queries.	option	-	enable
	Option Description enable Enable setting. disable Disable setting.
status	Enable/disable this SNMP community.	option	-	enable
	Option Description enable Enable setting. disable Disable setting.
trap-v1-status	Enable/disable SNMP v1 traps.	option	-	enable
	Option Description enable Enable setting. disable Disable setting.
trap-v2c-status	Enable/disable SNMP v2c traps.	option	-	enable
	Option Description enable Enable setting. disable Disable setting.

config hosts

Parameter	Description	Type	Size	Default
id	Host entry ID.	integer	Minimum value: 0 Maximum value: 4294967295	0
ip	IPv4 address of the SNMP manager (host).	user	Not Specified

config user

Parameter	Description	Type	Size	Default
auth-proto	Authentication protocol.	option	-	sha
	Option Description md5 HMAC-MD5-96 authentication protocol. sha HMAC-SHA-96 authentication protocol.
auth-pwd	Password for authentication protocol.	password	Not Specified
name	SNMP user name.	string	Maximum length: 32	test
notify-hosts	Configure SNMP User Notify Hosts.	ipv4-address	Not Specified
priv-proto	Privacy (encryption) protocol.	option	-	aes
	Option Description aes CFB128-AES-128 symmetric encryption protocol. des CBC-DES symmetric encryption protocol. aes256 CFB128-AES-256 symmetric encryption protocol. aes256cisco CFB128-AES-256 symmetric encryption protocol compatible with CISCO.
priv-pwd	Password for privacy (encryption) protocol.	password	Not Specified
queries	Enable/disable SNMP queries for this user.	option	-	enable
	Option Description enable Enable setting. disable Disable setting.
security-level	Security level for message authentication and encryption.	option	-	no-auth-no-priv
	Option Description no-auth-no-priv Message with no authentication and no privacy (encryption). auth-no-priv Message with authentication but no privacy (encryption). auth-priv Message with authentication and privacy (encryption).
status	SNMP user enable.	option	-	enable
	Option Description enable Enable setting. disable Disable setting.
trap-status	Enable/disable traps for this SNMP user.	option	-	disable
	Option Description enable Enable setting. disable Disable setting.