config switch-controller fortilink-settings
|
This command is available for model(s): FortiGate 1000D, FortiGate 100EF, FortiGate 100E, FortiGate 100F, FortiGate 101E, FortiGate 101F, FortiGate 1100E, FortiGate 1101E, FortiGate 1200D, FortiGate 140E-POE, FortiGate 140E, FortiGate 1500DT, FortiGate 1500D, FortiGate 2000E, FortiGate 200E, FortiGate 200F, FortiGate 201E, FortiGate 201F, FortiGate 2200E, FortiGate 2201E, FortiGate 2500E, FortiGate 3000D, FortiGate 300E, FortiGate 301E, FortiGate 3100D, FortiGate 3200D, FortiGate 3300E, FortiGate 3301E, FortiGate 3400E, FortiGate 3401E, FortiGate 3500F, FortiGate 3600E, FortiGate 3601E, FortiGate 3700D, FortiGate 3800D, FortiGate 3960E, FortiGate 3980E, FortiGate 400E Bypass, FortiGate 400E, FortiGate 400F, FortiGate 401E, FortiGate 401F, FortiGate 40F 3G4G, FortiGate 40F, FortiGate 4200F, FortiGate 4201F, FortiGate 4400F, FortiGate 4401F, FortiGate 500E, FortiGate 501E, FortiGate 600E, FortiGate 600F, FortiGate 601E, FortiGate 601F, FortiGate 60E DSLJ, FortiGate 60E DSL, FortiGate 60E-POE, FortiGate 60E, FortiGate 60F, FortiGate 61E, FortiGate 61F, FortiGate 70F, FortiGate 71F, FortiGate 800D, FortiGate 80E-POE, FortiGate 80E, FortiGate 80F Bypass, FortiGate 80F-POE, FortiGate 80F, FortiGate 81E-POE, FortiGate 81E, FortiGate 81F-POE, FortiGate 81F, FortiGate 900D, FortiGate 90E, FortiGate 91E, FortiGateRugged 60F 3G4G, FortiGateRugged 60F, FortiWiFi 40F 3G4G, FortiWiFi 40F, FortiWiFi 60E DSLJ, FortiWiFi 60E DSL, FortiWiFi 60E, FortiWiFi 60F, FortiWiFi 61E, FortiWiFi 61F, FortiWiFi 80F 2R, FortiWiFi 81F 2R 3G4G-POE, FortiWiFi 81F 2R-POE, FortiWiFi 81F 2R. It is not available for: FortiGate 5001E1, FortiGate 5001E. |
Configure integrated FortiLink settings for FortiSwitch.
config switch-controller fortilink-settings
Description: Configure integrated FortiLink settings for FortiSwitch.
edit <name>
set fortilink {string}
set inactive-timer {integer}
set link-down-flush [disable|enable]
config nac-ports
Description: NAC specific configuration.
set onboarding-vlan {string}
set lan-segment [enabled|disabled]
set nac-lan-interface {string}
set nac-segment-vlans <vlan-name1>, <vlan-name2>, ...
set parent-key {string}
set member-change {integer}
end
next
end
config switch-controller fortilink-settings
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
fortilink |
FortiLink interface to which this fortilink-setting belongs. |
string |
Maximum length: 15 |
|
||||||
|
inactive-timer |
Time interval(minutes) to be included in the inactive devices expiry calculation (mac age-out + inactive-time + periodic scan interval). |
integer |
Minimum value: 1 Maximum value: 1440 |
15 |
||||||
|
link-down-flush |
Clear NAC and dynamic devices on switch ports on link down event. |
option |
- |
enable |
||||||
|
|
|
|||||||||
|
name |
FortiLink settings name. |
string |
Maximum length: 35 |
|
||||||
config nac-ports
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
onboarding-vlan |
Default NAC Onboarding VLAN when NAC devices are discovered. |
string |
Maximum length: 15 |
|
||||||
|
lan-segment |
Enable/disable LAN segment feature on the FortiLink interface. |
option |
- |
disabled |
||||||
|
|
|
|||||||||
|
nac-lan-interface |
Configure NAC LAN interface. |
string |
Maximum length: 15 |
|
||||||
|
nac-segment-vlans |
Configure NAC segment VLANs. VLAN interface name. |
string |
Maximum length: 79 |
|
||||||
|
parent-key |
Parent key name. |
string |
Maximum length: 35 |
|
||||||
|
member-change |
Member change flag. |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||