config router ospf6
Configure IPv6 OSPF.
config router ospf6
Description: Configure IPv6 OSPF.
set abr-type [cisco|ibm|...]
config area
Description: OSPF6 area configuration.
edit <id>
set default-cost {integer}
set nssa-translator-role [candidate|never|...]
set stub-type [no-summary|summary]
set type [regular|nssa|...]
set nssa-default-information-originate [enable|disable]
set nssa-default-information-originate-metric {integer}
set nssa-default-information-originate-metric-type [1|2]
set nssa-redistribution [enable|disable]
set authentication [none|ah|...]
set key-rollover-interval {integer}
set ipsec-auth-alg [md5|sha1|...]
set ipsec-enc-alg [null|des|...]
config ipsec-keys
Description: IPsec authentication and encryption keys.
edit <spi>
set auth-key {password}
set enc-key {password}
next
end
config range
Description: OSPF6 area range configuration.
edit <id>
set prefix6 {ipv6-network}
set advertise [disable|enable]
next
end
config virtual-link
Description: OSPF6 virtual link configuration.
edit <name>
set dead-interval {integer}
set hello-interval {integer}
set retransmit-interval {integer}
set transmit-delay {integer}
set peer {ipv4-address-any}
set authentication [none|ah|...]
set key-rollover-interval {integer}
set ipsec-auth-alg [md5|sha1|...]
set ipsec-enc-alg [null|des|...]
config ipsec-keys
Description: IPsec authentication and encryption keys.
edit <spi>
set auth-key {password}
set enc-key {password}
next
end
next
end
next
end
set auto-cost-ref-bandwidth {integer}
set bfd [enable|disable]
set default-information-metric {integer}
set default-information-metric-type [1|2]
set default-information-originate [enable|always|...]
set default-information-route-map {string}
set default-metric {integer}
set log-neighbour-changes [enable|disable]
config ospf6-interface
Description: OSPF6 interface configuration.
edit <name>
set area-id {ipv4-address-any}
set interface {string}
set retransmit-interval {integer}
set transmit-delay {integer}
set cost {integer}
set priority {integer}
set dead-interval {integer}
set hello-interval {integer}
set status [disable|enable]
set network-type [broadcast|point-to-point|...]
set bfd [global|enable|...]
set mtu {integer}
set mtu-ignore [enable|disable]
set authentication [none|ah|...]
set key-rollover-interval {integer}
set ipsec-auth-alg [md5|sha1|...]
set ipsec-enc-alg [null|des|...]
config ipsec-keys
Description: IPsec authentication and encryption keys.
edit <spi>
set auth-key {password}
set enc-key {password}
next
end
config neighbor
Description: OSPFv3 neighbors are used when OSPFv3 runs on non-broadcast media.
edit <ip6>
set poll-interval {integer}
set cost {integer}
set priority {integer}
next
end
next
end
set passive-interface <name1>, <name2>, ...
config redistribute
Description: Redistribute configuration.
edit <name>
set status [enable|disable]
set metric {integer}
set routemap {string}
set metric-type [1|2]
next
end
set router-id {ipv4-address-any}
set spf-timers {user}
config summary-address
Description: IPv6 address summary configuration.
edit <id>
set prefix6 {ipv6-network}
set advertise [disable|enable]
set tag {integer}
next
end
end
config router ospf6
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
abr-type |
Area border router type. |
option |
- |
standard |
||||||||
|
|
|
|||||||||||
|
auto-cost-ref-bandwidth |
Reference bandwidth in terms of megabits per second. |
integer |
Minimum value: 1 Maximum value: 1000000 |
1000 |
||||||||
|
bfd |
Enable/disable Bidirectional Forwarding Detection (BFD). |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
default-information-metric |
Default information metric. |
integer |
Minimum value: 1 Maximum value: 16777214 |
10 |
||||||||
|
default-information-metric-type |
Default information metric type. |
option |
- |
2 |
||||||||
|
|
|
|||||||||||
|
default-information-originate |
Enable/disable generation of default route. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
default-information-route-map |
Default information route map. |
string |
Maximum length: 35 |
|
||||||||
|
default-metric |
Default metric of redistribute routes. |
integer |
Minimum value: 1 Maximum value: 16777214 |
10 |
||||||||
|
log-neighbour-changes |
Log OSPFv3 neighbor changes. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
passive-interface |
Passive interface configuration. Passive interface name. |
string |
Maximum length: 79 |
|
||||||||
|
router-id |
A.B.C.D, in IPv4 address format. |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||||
|
spf-timers |
SPF calculation frequency. |
user |
Not Specified |
|
||||||||
config area
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
id |
Area entry IP address. |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||||||||||
|
default-cost |
Summary default cost of stub or NSSA area. |
integer |
Minimum value: 0 Maximum value: 16777215 |
10 |
||||||||||||||
|
nssa-translator-role |
NSSA translator role type. |
option |
- |
candidate |
||||||||||||||
|
|
|
|||||||||||||||||
|
stub-type |
Stub summary setting. |
option |
- |
summary |
||||||||||||||
|
|
|
|||||||||||||||||
|
type |
Area type setting. |
option |
- |
regular |
||||||||||||||
|
|
|
|||||||||||||||||
|
nssa-default-information-originate |
Enable/disable originate type 7 default into NSSA area. |
option |
- |
disable |
||||||||||||||
|
|
|
|||||||||||||||||
|
nssa-default-information-originate-metric |
OSPFv3 default metric. |
integer |
Minimum value: 0 Maximum value: 16777214 |
10 |
||||||||||||||
|
nssa-default-information-originate-metric-type |
OSPFv3 metric type for default routes. |
option |
- |
2 |
||||||||||||||
|
|
|
|||||||||||||||||
|
nssa-redistribution |
Enable/disable redistribute into NSSA area. |
option |
- |
enable |
||||||||||||||
|
|
|
|||||||||||||||||
|
authentication |
Authentication mode. |
option |
- |
none |
||||||||||||||
|
|
|
|||||||||||||||||
|
key-rollover-interval |
Key roll-over interval. |
integer |
Minimum value: 300 Maximum value: 216000 |
300 |
||||||||||||||
|
ipsec-auth-alg |
Authentication algorithm. |
option |
- |
md5 |
||||||||||||||
|
|
|
|||||||||||||||||
|
ipsec-enc-alg |
Encryption algorithm. |
option |
- |
null |
||||||||||||||
|
|
|
|||||||||||||||||
config ipsec-keys
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
spi |
Security Parameters Index. |
integer |
Minimum value: 256 Maximum value: 4294967295 |
0 |
|
auth-key |
Authentication key. |
password |
Not Specified |
|
|
enc-key |
Encryption key. |
password |
Not Specified |
|
config ipsec-keys
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
spi |
Security Parameters Index. |
integer |
Minimum value: 256 Maximum value: 4294967295 |
0 |
|
auth-key |
Authentication key. |
password |
Not Specified |
|
|
enc-key |
Encryption key. |
password |
Not Specified |
|
config range
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
id |
Range entry ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||
|
prefix6 |
IPv6 prefix. |
ipv6-network |
Not Specified |
::/0 |
||||||
|
advertise |
Enable/disable advertise status. |
option |
- |
enable |
||||||
|
|
|
|||||||||
config virtual-link
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
name |
Virtual link entry name. |
string |
Maximum length: 35 |
|
||||||||||||||
|
dead-interval |
Dead interval. |
integer |
Minimum value: 1 Maximum value: 65535 |
40 |
||||||||||||||
|
hello-interval |
Hello interval. |
integer |
Minimum value: 1 Maximum value: 65535 |
10 |
||||||||||||||
|
retransmit-interval |
Retransmit interval. |
integer |
Minimum value: 1 Maximum value: 65535 |
5 |
||||||||||||||
|
transmit-delay |
Transmit delay. |
integer |
Minimum value: 1 Maximum value: 65535 |
1 |
||||||||||||||
|
peer |
A.B.C.D, peer router ID. |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||||||||||
|
authentication |
Authentication mode. |
option |
- |
area |
||||||||||||||
|
|
|
|||||||||||||||||
|
key-rollover-interval |
Key roll-over interval. |
integer |
Minimum value: 300 Maximum value: 216000 |
300 |
||||||||||||||
|
ipsec-auth-alg |
Authentication algorithm. |
option |
- |
md5 |
||||||||||||||
|
|
|
|||||||||||||||||
|
ipsec-enc-alg |
Encryption algorithm. |
option |
- |
null |
||||||||||||||
|
|
|
|||||||||||||||||
config ipsec-keys
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
spi |
Security Parameters Index. |
integer |
Minimum value: 256 Maximum value: 4294967295 |
0 |
|
auth-key |
Authentication key. |
password |
Not Specified |
|
|
enc-key |
Encryption key. |
password |
Not Specified |
|
config ipsec-keys
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
spi |
Security Parameters Index. |
integer |
Minimum value: 256 Maximum value: 4294967295 |
0 |
|
auth-key |
Authentication key. |
password |
Not Specified |
|
|
enc-key |
Encryption key. |
password |
Not Specified |
|
config ospf6-interface
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
name |
Interface entry name. |
string |
Maximum length: 35 |
|
||||||||||||||
|
area-id |
A.B.C.D, in IPv4 address format. |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||||||||||
|
interface |
Configuration interface name. |
string |
Maximum length: 15 |
|
||||||||||||||
|
retransmit-interval |
Retransmit interval. |
integer |
Minimum value: 1 Maximum value: 65535 |
5 |
||||||||||||||
|
transmit-delay |
Transmit delay. |
integer |
Minimum value: 1 Maximum value: 65535 |
1 |
||||||||||||||
|
cost |
Cost of the interface, value range from 0 to 65535, 0 means auto-cost. |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
||||||||||||||
|
priority |
Priority. |
integer |
Minimum value: 0 Maximum value: 255 |
1 |
||||||||||||||
|
dead-interval |
Dead interval. |
integer |
Minimum value: 1 Maximum value: 65535 |
0 |
||||||||||||||
|
hello-interval |
Hello interval. |
integer |
Minimum value: 1 Maximum value: 65535 |
0 |
||||||||||||||
|
status |
Enable/disable OSPF6 routing on this interface. |
option |
- |
enable |
||||||||||||||
|
|
|
|||||||||||||||||
|
network-type |
Network type. |
option |
- |
broadcast |
||||||||||||||
|
|
|
|||||||||||||||||
|
bfd |
Enable/disable Bidirectional Forwarding Detection (BFD). |
option |
- |
global |
||||||||||||||
|
|
|
|||||||||||||||||
|
mtu |
MTU for OSPFv3 packets. |
integer |
Minimum value: 576 Maximum value: 65535 |
0 |
||||||||||||||
|
mtu-ignore |
Enable/disable ignoring MTU field in DBD packets. |
option |
- |
disable |
||||||||||||||
|
|
|
|||||||||||||||||
|
authentication |
Authentication mode. |
option |
- |
area |
||||||||||||||
|
|
|
|||||||||||||||||
|
key-rollover-interval |
Key roll-over interval. |
integer |
Minimum value: 300 Maximum value: 216000 |
300 |
||||||||||||||
|
ipsec-auth-alg |
Authentication algorithm. |
option |
- |
md5 |
||||||||||||||
|
|
|
|||||||||||||||||
|
ipsec-enc-alg |
Encryption algorithm. |
option |
- |
null |
||||||||||||||
|
|
|
|||||||||||||||||
config ipsec-keys
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
spi |
Security Parameters Index. |
integer |
Minimum value: 256 Maximum value: 4294967295 |
0 |
|
auth-key |
Authentication key. |
password |
Not Specified |
|
|
enc-key |
Encryption key. |
password |
Not Specified |
|
config ipsec-keys
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
spi |
Security Parameters Index. |
integer |
Minimum value: 256 Maximum value: 4294967295 |
0 |
|
auth-key |
Authentication key. |
password |
Not Specified |
|
|
enc-key |
Encryption key. |
password |
Not Specified |
|
config neighbor
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
ip6 |
IPv6 link local address of the neighbor. |
ipv6-address |
Not Specified |
:: |
|
poll-interval |
Poll interval time in seconds. |
integer |
Minimum value: 1 Maximum value: 65535 |
10 |
|
cost |
Cost of the interface, value range from 0 to 65535, 0 means auto-cost. |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
|
priority |
Priority. |
integer |
Minimum value: 0 Maximum value: 255 |
1 |
config redistribute
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
name |
Redistribute name. |
string |
Maximum length: 35 |
|
||||||
|
status |
Status. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
metric |
Redistribute metric setting. |
integer |
Minimum value: 0 Maximum value: 16777214 |
0 |
||||||
|
routemap |
Route map name. |
string |
Maximum length: 35 |
|
||||||
|
metric-type |
Metric type. |
option |
- |
2 |
||||||
|
|
|
|||||||||
config summary-address
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
id |
Summary address entry ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||
|
prefix6 |
IPv6 prefix. |
ipv6-network |
Not Specified |
::/0 |
||||||
|
advertise |
Enable/disable advertise status. |
option |
- |
enable |
||||||
|
|
|
|||||||||
|
tag |
Tag value. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||