config router static6

Configure IPv6 static routing tables.

config router static6

Description: Configure IPv6 static routing tables.

edit <seq-num>

set status [enable|disable]

set dst {ipv6-network}

set gateway {ipv6-address}

set device {string}

set devindex {integer}

set distance {integer}

set priority {integer}

set comment {var-string}

set blackhole [enable|disable]

set sdwan [enable|disable]

set link-monitor-exempt [enable|disable]

set bfd [enable|disable]

next

end

config router static6

Parameter	Description	Type	Size	Default
status	Enable/disable this static route.	option	-	enable
	Option Description enable Enable static route. disable Disable static route.
dst	Destination IPv6 prefix.	ipv6-network	Not Specified	::/0
gateway	IPv6 address of the gateway.	ipv6-address	Not Specified	::
device	Gateway out interface or tunnel.	string	Maximum length: 35
devindex	Device index .	integer	Minimum value: 0 Maximum value: 4294967295	0
distance	Administrative distance .	integer	Minimum value: 1 Maximum value: 255	10
priority	Administrative priority .	integer	Minimum value: 1 Maximum value: 65535	1024
comment	Optional comments.	var-string	Maximum length: 255
blackhole	Enable/disable black hole.	option	-	disable
	Option Description enable Enable black hole. disable Disable black hole.
sdwan	Enable/disable egress through the SD-WAN.	option	-	disable
	Option Description enable Enable setting. disable Disable setting.
link-monitor-exempt	Enable/disable withdrawal of this static route when link monitor or health check is down.	option	-	disable
	Option Description enable Keep this static route when link monitor or health check is down. disable Withdraw this static route when link monitor or health check is down. (default)
bfd	Enable/disable Bidirectional Forwarding Detection (BFD).	option	-	disable
	Option Description enable Enable Bidirectional Forwarding Detection (BFD). disable Disable Bidirectional Forwarding Detection (BFD).