config wireless-controller global
Configure wireless controller global settings.
config wireless-controller global
Description: Configure wireless controller global settings.
set name {string}
set location {string}
set image-download [enable|disable]
set max-retransmit {integer}
set control-message-offload {option1}, {option2}, ...
set data-ethernet-II [enable|disable]
set link-aggregation [enable|disable]
set mesh-eth-type {integer}
set fiapp-eth-type {integer}
set discovery-mc-addr {ipv4-address-multicast}
set max-clients {integer}
set rogue-scan-mac-adjacency {integer}
set ipsec-base-ip {ipv4-address}
set wtp-share [enable|disable]
set ap-log-server [enable|disable]
set ap-log-server-ip {ipv4-address}
set ap-log-server-port {integer}
end
config wireless-controller global
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
name |
Name of the wireless controller. |
string |
Maximum length: 35 |
|
||||||||||||||||||||
|
location |
Description of the location of the wireless controller. |
string |
Maximum length: 35 |
|
||||||||||||||||||||
|
image-download |
Enable/disable WTP image download at join time. |
option |
- |
enable |
||||||||||||||||||||
|
|
|
|||||||||||||||||||||||
|
max-retransmit |
Maximum number of tunnel packet retransmissions . |
integer |
Minimum value: 0 Maximum value: 64 |
3 |
||||||||||||||||||||
|
control-message-offload |
Configure CAPWAP control message data channel offload. |
option |
- |
ebp-frame aeroscout-tag ap-list sta-list sta-cap-list stats aeroscout-mu sta-health spectral-analysis |
||||||||||||||||||||
|
|
|
|||||||||||||||||||||||
|
data-ethernet-II |
Configure the wireless controller to use Ethernet II or 802.3 frames with 802.3 data tunnel mode . |
option |
- |
enable |
||||||||||||||||||||
|
|
|
|||||||||||||||||||||||
|
link-aggregation |
Enable/disable calculating the CAPWAP transmit hash to load balance sessions to link aggregation nodes . |
option |
- |
disable |
||||||||||||||||||||
|
|
|
|||||||||||||||||||||||
|
mesh-eth-type |
Mesh Ethernet identifier included in backhaul packets . |
integer |
Minimum value: 0 Maximum value: 65535 |
8755 |
||||||||||||||||||||
|
fiapp-eth-type |
Ethernet type for Fortinet Inter-Access Point Protocol . |
integer |
Minimum value: 0 Maximum value: 65535 |
5252 |
||||||||||||||||||||
|
discovery-mc-addr |
Multicast IP address for AP discovery . |
ipv4-address-multicast |
Not Specified |
224.0.1.140 |
||||||||||||||||||||
|
max-clients |
Maximum number of clients that can connect simultaneously . |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||||||||||
|
rogue-scan-mac-adjacency |
Maximum numerical difference between an AP's Ethernet and wireless MAC values to match for rogue detection . |
integer |
Minimum value: 0 Maximum value: 31 |
7 |
||||||||||||||||||||
|
ipsec-base-ip |
Base IP address for IPsec VPN tunnels between the access points and the wireless controller . |
ipv4-address |
Not Specified |
169.254.0.1 |
||||||||||||||||||||
|
wtp-share |
Enable/disable sharing of WTPs between VDOMs. |
option |
- |
disable |
||||||||||||||||||||
|
|
|
|||||||||||||||||||||||
|
ap-log-server |
Enable/disable configuring APs or FortiAPs to send log messages to a syslog server . |
option |
- |
disable |
||||||||||||||||||||
|
|
|
|||||||||||||||||||||||
|
ap-log-server-ip |
IP address that APs or FortiAPs send log messages to. |
ipv4-address |
Not Specified |
0.0.0.0 |
||||||||||||||||||||
|
ap-log-server-port |
Port that APs or FortiAPs send log messages to. |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
||||||||||||||||||||