config firewall ipmacbinding setting

Configure IP to MAC binding settings.

config firewall ipmacbinding setting

Description: Configure IP to MAC binding settings.

set bindthroughfw [enable|disable]

set bindtofw [enable|disable]

set undefinedhost [allow|block]

end

config firewall ipmacbinding setting

Parameter	Description	Type	Size	Default
bindthroughfw	Enable/disable use of IP/MAC binding to filter packets that would normally go through the firewall.	option	-	disable
	Option Description enable Enable IP/MAC binding for packets that would normally go through the firewall. disable Disable IP/MAC binding for packets that would normally go through the firewall.
bindtofw	Enable/disable use of IP/MAC binding to filter packets that would normally go to the firewall.	option	-	disable
	Option Description enable Enable IP/MAC binding for packets that would normally go to the firewall. disable Disable IP/MAC binding for packets that would normally go to the firewall.
undefinedhost	Select action to take on packets with IP/MAC addresses not in the binding list (default = block).	option	-	block
	Option Description allow Allow packets from MAC addresses not in the IP/MAC list. block Block packets from MAC addresses not in the IP/MAC list.