Fortinet white logo
Fortinet white logo

Administration Guide

Set up FortiToken multi-factor authentication

Set up FortiToken multi-factor authentication

This configuration adds multi-factor authentication (MFA) to the split tunnel configuration (SSL VPN split tunnel for remote user). It uses one of the two free mobile FortiTokens that is already installed on the FortiGate.

To configure MFA using the GUI:
  1. Configure a user and user group:
    1. Go to User & Authentication > User Definition and edit local user sslvpnuser1.
    2. Enable Two-factor Authentication and select one mobile Token from the list,
    3. Enter the user's Email Address.
    4. Enable Send Activation Code and select Email.
    5. Click Next and click Submit.
  2. Activate the mobile token.

    When a FortiToken is added to user sslvpnuser1, an email is sent to the user's email address. Follow the instructions to install your FortiToken mobile application on your device and activate your token.

To configure MFA using the CLI:
  1. Configure a user and user group:
    config user local
        edit "sslvpnuser1"
            set type password
            set two-factor fortitoken
            set fortitoken <select mobile token for the option list>
            set email-to <user's email address>
            set passwd <user's password>
        next
    end
    config user group
        edit "sslvpngroup" 
            set member "sslvpnuser1"
        next 
    end
  2. Activate the mobile token.

    When a FortiToken is added to user sslvpnuser1, an email is sent to the user's email address. Follow the instructions to install your FortiToken mobile application on your device and activate your token.

Related Videos

sidebar video

Adding FortiToken 2FA to VPN Users

  • 5,348 views
  • 4 years ago

Set up FortiToken multi-factor authentication

Set up FortiToken multi-factor authentication

This configuration adds multi-factor authentication (MFA) to the split tunnel configuration (SSL VPN split tunnel for remote user). It uses one of the two free mobile FortiTokens that is already installed on the FortiGate.

To configure MFA using the GUI:
  1. Configure a user and user group:
    1. Go to User & Authentication > User Definition and edit local user sslvpnuser1.
    2. Enable Two-factor Authentication and select one mobile Token from the list,
    3. Enter the user's Email Address.
    4. Enable Send Activation Code and select Email.
    5. Click Next and click Submit.
  2. Activate the mobile token.

    When a FortiToken is added to user sslvpnuser1, an email is sent to the user's email address. Follow the instructions to install your FortiToken mobile application on your device and activate your token.

To configure MFA using the CLI:
  1. Configure a user and user group:
    config user local
        edit "sslvpnuser1"
            set type password
            set two-factor fortitoken
            set fortitoken <select mobile token for the option list>
            set email-to <user's email address>
            set passwd <user's password>
        next
    end
    config user group
        edit "sslvpngroup" 
            set member "sslvpnuser1"
        next 
    end
  2. Activate the mobile token.

    When a FortiToken is added to user sslvpnuser1, an email is sent to the user's email address. Follow the instructions to install your FortiToken mobile application on your device and activate your token.