config firewall ippool
Description: Configure IPv4 IP pools.
edit <name>
set type [overload|one-to-one|...]
set startip {ipv4-address-any}
set endip {ipv4-address-any}
set source-startip {ipv4-address-any}
set source-endip {ipv4-address-any}
set block-size {integer}
set num-blocks-per-user {integer}
set pba-timeout {integer}
set permit-any-host [disable|enable]
set arp-reply [disable|enable]
set arp-intf {string}
set associated-interface {string}
set comments {var-string}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| type | IP pool type (overload, one-to-one, fixed port range, or port block allocation). overload: IP addresses in the IP pool can be shared by clients. one-to-one: One to one mapping. fixed-port-range: Fixed port range. port-block-allocation: Port block allocation. |
option | - |
| startip | First IPv4 address (inclusive) in the range for the address pool (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). | ipv4-address-any | Not Specified |
| endip | Final IPv4 address (inclusive) in the range for the address pool (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). | ipv4-address-any | Not Specified |
| source-startip | First IPv4 address (inclusive) in the range of the source addresses to be translated (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). | ipv4-address-any | Not Specified |
| source-endip | Final IPv4 address (inclusive) in the range of the source addresses to be translated (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). | ipv4-address-any | Not Specified |
| block-size | Number of addresses in a block (64 to 4096, default = 128). | integer | Minimum value: 64 Maximum value: 4096 |
| num-blocks-per-user | Number of addresses blocks that can be used by a user (1 to 128, default = 8). | integer | Minimum value: 1 Maximum value: 128 |
| pba-timeout | Port block allocation timeout (seconds). | integer | Minimum value: 3 Maximum value: 300 |
| permit-any-host | Enable/disable full cone NAT. disable: Disable full cone NAT. enable: Enable full cone NAT. |
option | - |
| arp-reply | Enable/disable replying to ARP requests when an IP Pool is added to a policy (default = enable). disable: Disable ARP reply. enable: Enable ARP reply. |
option | - |
| arp-intf | Select an interface from available options that will reply to ARP requests. (If blank, any is selected). | string | Maximum length: 15 |
| associated-interface | Associated interface name. | string | Maximum length: 15 |
| comments | Comment. | var-string | Maximum length: 255 |
config firewall ippool
Description: Configure IPv4 IP pools.
edit <name>
set type [overload|one-to-one|...]
set startip {ipv4-address-any}
set endip {ipv4-address-any}
set source-startip {ipv4-address-any}
set source-endip {ipv4-address-any}
set block-size {integer}
set num-blocks-per-user {integer}
set pba-timeout {integer}
set permit-any-host [disable|enable]
set arp-reply [disable|enable]
set arp-intf {string}
set associated-interface {string}
set comments {var-string}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| type | IP pool type (overload, one-to-one, fixed port range, or port block allocation). overload: IP addresses in the IP pool can be shared by clients. one-to-one: One to one mapping. fixed-port-range: Fixed port range. port-block-allocation: Port block allocation. |
option | - |
| startip | First IPv4 address (inclusive) in the range for the address pool (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). | ipv4-address-any | Not Specified |
| endip | Final IPv4 address (inclusive) in the range for the address pool (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). | ipv4-address-any | Not Specified |
| source-startip | First IPv4 address (inclusive) in the range of the source addresses to be translated (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). | ipv4-address-any | Not Specified |
| source-endip | Final IPv4 address (inclusive) in the range of the source addresses to be translated (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). | ipv4-address-any | Not Specified |
| block-size | Number of addresses in a block (64 to 4096, default = 128). | integer | Minimum value: 64 Maximum value: 4096 |
| num-blocks-per-user | Number of addresses blocks that can be used by a user (1 to 128, default = 8). | integer | Minimum value: 1 Maximum value: 128 |
| pba-timeout | Port block allocation timeout (seconds). | integer | Minimum value: 3 Maximum value: 300 |
| permit-any-host | Enable/disable full cone NAT. disable: Disable full cone NAT. enable: Enable full cone NAT. |
option | - |
| arp-reply | Enable/disable replying to ARP requests when an IP Pool is added to a policy (default = enable). disable: Disable ARP reply. enable: Enable ARP reply. |
option | - |
| arp-intf | Select an interface from available options that will reply to ARP requests. (If blank, any is selected). | string | Maximum length: 15 |
| associated-interface | Associated interface name. | string | Maximum length: 15 |
| comments | Comment. | var-string | Maximum length: 255 |