config switch-controller lldp-settings
Description: Configure FortiSwitch LLDP settings.
set tx-hold {integer}
set tx-interval {integer}
set fast-start-interval {integer}
set management-interface [internal|mgmt]
set device-detection [disable|enable]
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| tx-hold | Number of tx-intervals before local LLDP data expires (1 - 16, default = 4). Packet TTL is tx-hold * tx-interval. | integer | Minimum value: 1 Maximum value: 16 |
| tx-interval | Frequency of LLDP PDU transmission from FortiSwitch (5 - 4095 sec, default = 30). Packet TTL is tx-hold * tx-interval. | integer | Minimum value: 5 Maximum value: 4095 |
| fast-start-interval | Frequency of LLDP PDU transmission from FortiSwitch for the first 4 packets when the link is up (2 - 5 sec, default = 2, 0 = disable fast start). | integer | Minimum value: 0 Maximum value: 255 |
| management-interface | Primary management interface to be advertised in LLDP and CDP PDUs. internal: Use internal interface. mgmt: Use management interface. |
option | - |
| device-detection | Enable/disable dynamic detection of LLDP neighbor devices for VLAN assignment. disable: Disable dynamic detection of LLDP neighbor devices. enable: Enable dynamic detection of LLDP neighbor devices. |
option | - |
config switch-controller lldp-settings
Description: Configure FortiSwitch LLDP settings.
set tx-hold {integer}
set tx-interval {integer}
set fast-start-interval {integer}
set management-interface [internal|mgmt]
set device-detection [disable|enable]
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| tx-hold | Number of tx-intervals before local LLDP data expires (1 - 16, default = 4). Packet TTL is tx-hold * tx-interval. | integer | Minimum value: 1 Maximum value: 16 |
| tx-interval | Frequency of LLDP PDU transmission from FortiSwitch (5 - 4095 sec, default = 30). Packet TTL is tx-hold * tx-interval. | integer | Minimum value: 5 Maximum value: 4095 |
| fast-start-interval | Frequency of LLDP PDU transmission from FortiSwitch for the first 4 packets when the link is up (2 - 5 sec, default = 2, 0 = disable fast start). | integer | Minimum value: 0 Maximum value: 255 |
| management-interface | Primary management interface to be advertised in LLDP and CDP PDUs. internal: Use internal interface. mgmt: Use management interface. |
option | - |
| device-detection | Enable/disable dynamic detection of LLDP neighbor devices for VLAN assignment. disable: Disable dynamic detection of LLDP neighbor devices. enable: Enable dynamic detection of LLDP neighbor devices. |
option | - |