config wireless-controller timers
Description: Configure CAPWAP timers.
set echo-interval {integer}
set discovery-interval {integer}
set client-idle-timeout {integer}
set rogue-ap-log {integer}
set fake-ap-log {integer}
set sta-stats-interval {integer}
set vap-stats-interval {integer}
set radio-stats-interval {integer}
set sta-capability-interval {integer}
set sta-locate-timer {integer}
set ipsec-intf-cleanup {integer}
set ble-scan-report-intv {integer}
set drma-interval {integer}
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| echo-interval | Time between echo requests sent by the managed WTP, AP, or FortiAP (1 - 255 sec, default = 30). | integer | Minimum value: 1 Maximum value: 255 |
| discovery-interval | Time between discovery requests (2 - 180 sec, default = 5). | integer | Minimum value: 2 Maximum value: 180 |
| client-idle-timeout | Time after which a client is considered idle and times out (20 - 3600 sec, default = 300, 0 for no timeout). | integer | Minimum value: 20 Maximum value: 3600 |
| rogue-ap-log | Time between logging rogue AP messages if periodic rogue AP logging is configured (0 - 1440 min, default = 0). | integer | Minimum value: 0 Maximum value: 1440 |
| fake-ap-log | Time between recording logs about fake APs if periodic fake AP logging is configured (0 - 1440 min, default = 1). | integer | Minimum value: 1 Maximum value: 1440 |
| sta-stats-interval | Time between running client (station) reports (1 - 255 sec, default = 1). | integer | Minimum value: 1 Maximum value: 255 |
| vap-stats-interval | Time between running Virtual Access Point (VAP) reports (1 - 255 sec, default = 15). | integer | Minimum value: 1 Maximum value: 255 |
| radio-stats-interval | Time between running radio reports (1 - 255 sec, default = 15). | integer | Minimum value: 1 Maximum value: 255 |
| sta-capability-interval | Time between running station capability reports (1 - 255 sec, default = 30). | integer | Minimum value: 1 Maximum value: 255 |
| sta-locate-timer | Time between running client presence flushes to remove clients that are listed but no longer present (0 - 86400 sec, default = 1800). | integer | Minimum value: 0 Maximum value: 86400 |
| ipsec-intf-cleanup | Time period to keep IPsec VPN interfaces up after WTP sessions are disconnected (30 - 3600 sec, default = 120). | integer | Minimum value: 30 Maximum value: 3600 |
| ble-scan-report-intv | Time between running Bluetooth Low Energy (BLE) reports (10 - 3600 sec, default = 30). | integer | Minimum value: 10 Maximum value: 3600 |
| drma-interval | Dynamic radio mode assignment (DRMA) schedule interval in minutes (10 - 1440, default = 60). | integer | Minimum value: 1 Maximum value: 1440 |
config wireless-controller timers
Description: Configure CAPWAP timers.
set echo-interval {integer}
set discovery-interval {integer}
set client-idle-timeout {integer}
set rogue-ap-log {integer}
set fake-ap-log {integer}
set sta-stats-interval {integer}
set vap-stats-interval {integer}
set radio-stats-interval {integer}
set sta-capability-interval {integer}
set sta-locate-timer {integer}
set ipsec-intf-cleanup {integer}
set ble-scan-report-intv {integer}
set drma-interval {integer}
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| echo-interval | Time between echo requests sent by the managed WTP, AP, or FortiAP (1 - 255 sec, default = 30). | integer | Minimum value: 1 Maximum value: 255 |
| discovery-interval | Time between discovery requests (2 - 180 sec, default = 5). | integer | Minimum value: 2 Maximum value: 180 |
| client-idle-timeout | Time after which a client is considered idle and times out (20 - 3600 sec, default = 300, 0 for no timeout). | integer | Minimum value: 20 Maximum value: 3600 |
| rogue-ap-log | Time between logging rogue AP messages if periodic rogue AP logging is configured (0 - 1440 min, default = 0). | integer | Minimum value: 0 Maximum value: 1440 |
| fake-ap-log | Time between recording logs about fake APs if periodic fake AP logging is configured (0 - 1440 min, default = 1). | integer | Minimum value: 1 Maximum value: 1440 |
| sta-stats-interval | Time between running client (station) reports (1 - 255 sec, default = 1). | integer | Minimum value: 1 Maximum value: 255 |
| vap-stats-interval | Time between running Virtual Access Point (VAP) reports (1 - 255 sec, default = 15). | integer | Minimum value: 1 Maximum value: 255 |
| radio-stats-interval | Time between running radio reports (1 - 255 sec, default = 15). | integer | Minimum value: 1 Maximum value: 255 |
| sta-capability-interval | Time between running station capability reports (1 - 255 sec, default = 30). | integer | Minimum value: 1 Maximum value: 255 |
| sta-locate-timer | Time between running client presence flushes to remove clients that are listed but no longer present (0 - 86400 sec, default = 1800). | integer | Minimum value: 0 Maximum value: 86400 |
| ipsec-intf-cleanup | Time period to keep IPsec VPN interfaces up after WTP sessions are disconnected (30 - 3600 sec, default = 120). | integer | Minimum value: 30 Maximum value: 3600 |
| ble-scan-report-intv | Time between running Bluetooth Low Energy (BLE) reports (10 - 3600 sec, default = 30). | integer | Minimum value: 10 Maximum value: 3600 |
| drma-interval | Dynamic radio mode assignment (DRMA) schedule interval in minutes (10 - 1440, default = 60). | integer | Minimum value: 1 Maximum value: 1440 |