config vpn ocvpn

Configure Overlay Controller VPN settings.

config vpn ocvpn
    Description: Configure Overlay Controller VPN settings.
    set auto-discovery [enable|disable]
    set eap [enable|disable]
    set eap-users {string}
    config forticlient-access
        Description: Configure FortiClient settings.
        set status [enable|disable]
        set psksecret {password-3}
        config auth-groups
            Description: FortiClient user authentication groups.
            edit <name>
                set auth-group {string}
                set overlays <overlay-name1>, <overlay-name2>, ...
            next
        end
    end
    set ip-allocation-block {ipv4-classnet-any}
    set multipath [enable|disable]
    set nat [enable|disable]
    config overlays
        Description: Network overlays to register with Overlay Controller VPN service.
        edit <overlay-name>
            set inter-overlay [allow|deny]
            set assign-ip [enable|disable]
            set ipv4-start-ip {ipv4-address}
            set ipv4-end-ip {ipv4-address}
            config subnets
                Description: Internal subnets to register with OCVPN service.
                edit <id>
                    set type [subnet|interface]
                    set subnet {ipv4-classnet-any}
                    set interface {string}
                next
            end
        next
    end
    set poll-interval {integer}
    set role [spoke|primary-hub|...]
    set sdwan [enable|disable]
    set status [enable|disable]
    set wan-interface <name1>, <name2>, ...
end

config vpn ocvpn

Parameter	Description	Type	Size	Default
auto-discovery	Enable/disable auto-discovery shortcuts.	option	-	enable
	Option Description enable Enable ADVPN auto-discovery shortcuts. disable Disable ADVPN auto-discovery shortcuts.
eap	Enable/disable EAP client authentication.	option	-	disable
	Option Description enable Enable EAP client authentication. disable Disable EAP client authentication.
eap-users	EAP authentication user group.	string	Maximum length: 35
ip-allocation-block	Class B subnet reserved for private IP address assignment.	ipv4-classnet-any	Not Specified	10.254.0.0 255.255.0.0
multipath	Enable/disable multipath redundancy.	option	-	enable
	Option Description enable Enable multipath redundancy. disable Disable multipath redundancy.
nat	Enable/disable inter-overlay source NAT.	option	-	disable
	Option Description enable Enable inter-overlay source NAT. disable Disable inter-overlay source NAT.
poll-interval	Overlay Controller VPN polling interval.	integer	Minimum value: 30 Maximum value: 120	30
role	Set device role.	option	-	spoke
	Option Description spoke Register device as static spoke. primary-hub Register device as primary hub. secondary-hub Register device as secondary hub.
sdwan	Enable/disable adding OCVPN tunnels to SDWAN.	option	-	disable
	Option Description enable Enable adding OCVPN tunnels to SDWAN. disable Disable adding OCVPN tunnels to SDWAN.
status	Enable/disable Overlay Controller cloud assisted VPN.	option	-	disable
	Option Description enable Enable Overlay Controller VPN. disable Disable Overlay Controller VPN.
wan-interface <name>	FortiGate WAN interfaces to use with OCVPN. Interface name.	string	Maximum length: 79

config forticlient-access

Parameter	Description	Type	Size	Default
status	Enable/disable FortiClient to access OCVPN networks.	option	-	disable
	Option Description enable Enable FortiClient access to OCVPN overlays. disable Disable FortiClient access to OCVPN overlays.
psksecret	Pre-shared secret for FortiClient PSK authentication (ASCII string or hexadecimal encoded with a leading 0x).	password-3	Not Specified

config auth-groups

Parameter	Description	Type	Size	Default
name	Group name.	string	Maximum length: 35
auth-group	Authentication user group for FortiClient access.	string	Maximum length: 35
overlays <overlay-name>	OCVPN overlays to allow access to. Overlay name.	string	Maximum length: 79

config overlays

Parameter	Description	Type	Size	Default
overlay-name	Overlay name.	string	Maximum length: 63
inter-overlay	Allow or deny traffic from other overlays.	option	-	deny
	Option Description allow Allow traffic from other overlays. deny Deny traffic from other overlays.
assign-ip	Enable/disable mode-cfg address assignment.	option	-	disable
	Option Description enable Enable client IPv4 address assignment. disable Disable client IPv4 address assignment.
ipv4-start-ip	Start of IPv4 range.	ipv4-address	Not Specified	0.0.0.0
ipv4-end-ip	End of IPv4 range.	ipv4-address	Not Specified	0.0.0.0

config subnets

Parameter	Description	Type	Size	Default
id	ID.	integer	Minimum value: 0 Maximum value: 4294967295	0
type	Subnet type.	option	-	subnet
	Option Description subnet Configure participating subnet IP and mask. interface Configure participating LAN interface.
subnet	IPv4 address and subnet mask.	ipv4-classnet-any	Not Specified	0.0.0.0 0.0.0.0
interface	LAN interface.	string	Maximum length: 15