config firewall ip-translation
Description: Configure firewall IP-translation.
edit <transid>
set type {option}
set startip {ipv4-address-any}
set endip {ipv4-address-any}
set map-startip {ipv4-address-any}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| type | IP translation type (option: SCTP). SCTP: SCTP |
option | - |
| startip | First IPv4 address (inclusive) in the range of the addresses to be translated (format xxx.xxx.xxx.xxx, default: 0.0.0.0). | ipv4-address-any | Not Specified |
| endip | Final IPv4 address (inclusive) in the range of the addresses to be translated (format xxx.xxx.xxx.xxx, default: 0.0.0.0). | ipv4-address-any | Not Specified |
| map-startip | Address to be used as the starting point for translation in the range (format xxx.xxx.xxx.xxx, default: 0.0.0.0). | ipv4-address-any | Not Specified |
config firewall ip-translation
Description: Configure firewall IP-translation.
edit <transid>
set type {option}
set startip {ipv4-address-any}
set endip {ipv4-address-any}
set map-startip {ipv4-address-any}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| type | IP translation type (option: SCTP). SCTP: SCTP |
option | - |
| startip | First IPv4 address (inclusive) in the range of the addresses to be translated (format xxx.xxx.xxx.xxx, default: 0.0.0.0). | ipv4-address-any | Not Specified |
| endip | Final IPv4 address (inclusive) in the range of the addresses to be translated (format xxx.xxx.xxx.xxx, default: 0.0.0.0). | ipv4-address-any | Not Specified |
| map-startip | Address to be used as the starting point for translation in the range (format xxx.xxx.xxx.xxx, default: 0.0.0.0). | ipv4-address-any | Not Specified |