config webfilter override
Description: Configure FortiGuard Web Filter administrative overrides.
edit <id>
set status [enable|disable]
set scope [user|user-group|...]
set ip {ipv4-address}
set user {string}
set user-group {string}
set old-profile {string}
set new-profile {string}
set ip6 {ipv6-address}
set expires {user}
set initiator {string}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | Enable/disable override rule. enable: Enable override rule. disable: Disable override rule. |
option | - |
| scope | Override either the specific user, user group, IPv4 address, or IPv6 address. user: Override the specified user. user-group: Override the specified user group. ip: Override the specified IP address. ip6: Override the specified IPv6 address. |
option | - |
| ip | IPv4 address which the override applies. | ipv4-address | Not Specified |
| user | Name of the user which the override applies. | string | Maximum length: 64 |
| user-group | Specify the user group for which the override applies. | string | Maximum length: 63 |
| old-profile | Name of the web filter profile which the override applies. | string | Maximum length: 35 |
| new-profile | Name of the new web filter profile used by the override. | string | Maximum length: 35 |
| ip6 | IPv6 address which the override applies. | ipv6-address | Not Specified |
| expires | Override expiration date and time, from 5 minutes to 365 from now (format: yyyy/mm/dd hh:mm:ss). | user | Not Specified |
| initiator | Initiating user of override (read-only setting). | string | Maximum length: 64 |
config webfilter override
Description: Configure FortiGuard Web Filter administrative overrides.
edit <id>
set status [enable|disable]
set scope [user|user-group|...]
set ip {ipv4-address}
set user {string}
set user-group {string}
set old-profile {string}
set new-profile {string}
set ip6 {ipv6-address}
set expires {user}
set initiator {string}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | Enable/disable override rule. enable: Enable override rule. disable: Disable override rule. |
option | - |
| scope | Override either the specific user, user group, IPv4 address, or IPv6 address. user: Override the specified user. user-group: Override the specified user group. ip: Override the specified IP address. ip6: Override the specified IPv6 address. |
option | - |
| ip | IPv4 address which the override applies. | ipv4-address | Not Specified |
| user | Name of the user which the override applies. | string | Maximum length: 64 |
| user-group | Specify the user group for which the override applies. | string | Maximum length: 63 |
| old-profile | Name of the web filter profile which the override applies. | string | Maximum length: 35 |
| new-profile | Name of the new web filter profile used by the override. | string | Maximum length: 35 |
| ip6 | IPv6 address which the override applies. | ipv6-address | Not Specified |
| expires | Override expiration date and time, from 5 minutes to 365 from now (format: yyyy/mm/dd hh:mm:ss). | user | Not Specified |
| initiator | Initiating user of override (read-only setting). | string | Maximum length: 64 |