config vpn ocvpn

Configure Overlay Controller VPN settings.

config vpn ocvpn

Description: Configure Overlay Controller VPN settings.

set status [enable|disable]

set role [spoke|primary-hub|...]

set poll-interval {integer}

set auto-discovery [enable|disable]

set eap [enable|disable]

set eap-users {string}

set nat [enable|disable]

config overlays

Description: Network overlays to register with Overlay Controller VPN service.

edit <id>

set name {string}

set assign-ip [enable|disable]

set ipv4-start-ip {ipv4-address}

set ipv4-end-ip {ipv4-address}

config subnets

Description: Internal subnets to register with OCVPN service.

edit <id>

set type [subnet|interface]

set subnet {ipv4-classnet-any}

set interface {string}

next

end

next

end

end

config vpn ocvpn

Parameter	Description	Type	Size
status	Enable/disable Overlay Controller cloud assisted VPN.	option	-
	Option Description enable Enable Overlay Controller VPN. disable Disable Overlay Controller VPN.
role	Set device role.	option	-
	Option Description spoke Register device as static spoke. primary-hub Register device as primary hub. secondary-hub Register device as secondary hub.
poll-interval	Overlay Controller VPN polling interval.	integer	Minimum value: 30 Maximum value: 120
auto-discovery	Enable/disable auto-discovery shortcuts.	option	-
	Option Description enable Enable ADVPN auto-discovery shortcuts. disable Disable ADVPN auto-discovery shortcuts.
eap	Enable/disable EAP client authentication.	option	-
	Option Description enable Enable EAP client authentication. disable Disable EAP client authentication.
eap-users	EAP authentication user group.	string	Maximum length: 35
nat	Enable/disable inter-overlay source NAT.	option	-
	Option Description enable Enable inter-overlay source NAT. disable Disable inter-overlay source NAT.

config overlays

Parameter	Description	Type	Size
name	Overlay name.	string	Maximum length: 63
assign-ip	Enable/disable client address assignment.	option	-
	Option Description enable Enable client IPv4 address assignment. disable Disable client IPv4 address assignment.
ipv4-start-ip	Start of client IPv4 range.	ipv4-address	Not Specified
ipv4-end-ip	End of client IPv4 range.	ipv4-address	Not Specified

config subnets

Parameter	Description	Type	Size
type	Subnet type.	option	-
	Option Description subnet Configure participating subnet IP and mask. interface Configure participating LAN interface.
subnet	IPv4 address and subnet mask.	ipv4-classnet-any	Not Specified
interface	LAN interface.	string	Maximum length: 15