config firewall multicast-policy
Description: Configure multicast NAT policies.
edit <id>
set status [enable|disable]
set logtraffic [enable|disable]
set srcintf {string}
set dstintf {string}
set srcaddr <name1>, <name2>, ...
set dstaddr <name1>, <name2>, ...
set snat [enable|disable]
set snat-ip {ipv4-address}
set dnat {ipv4-address-any}
set action [accept|deny]
set protocol {integer}
set start-port {integer}
set end-port {integer}
set auto-asic-offload [enable|disable]
next
end
Parameter Name | Description | Type | Size |
---|---|---|---|
status | Enable/disable this policy. enable: Enable this policy. disable: Disable this policy. |
option | - |
logtraffic | Enable/disable logging traffic accepted by this policy. enable: Enable logging traffic accepted by this policy. disable: Disable logging traffic accepted by this policy. |
option | - |
srcintf | Source interface name. | string | Maximum length: 35 |
dstintf | Destination interface name. | string | Maximum length: 35 |
srcaddr <name> |
Source address objects. Source address objects. |
string | Maximum length: 79 |
dstaddr <name> |
Destination address objects. Destination address objects. |
string | Maximum length: 79 |
snat | Enable/disable substitution of the outgoing interface IP address for the original source IP address (called source NAT or SNAT). enable: Enable source NAT. disable: Disable source NAT. |
option | - |
snat-ip | IPv4 address to be used as the source address for NATed traffic. | ipv4-address | Not Specified |
dnat | IPv4 DNAT address used for multicast destination addresses. | ipv4-address-any | Not Specified |
action | Accept or deny traffic matching the policy. accept: Accept traffic matching the policy. deny: Deny or block traffic matching the policy. |
option | - |
protocol | Integer value for the protocol type as defined by IANA (0 - 255, default = 0). | integer | Minimum value: 0 Maximum value: 255 |
start-port | Integer value for starting TCP/UDP/SCTP destination port in range (1 - 65535, default = 1). | integer | Minimum value: 0 Maximum value: 65535 |
end-port | Integer value for ending TCP/UDP/SCTP destination port in range (1 - 65535, default = 1). | integer | Minimum value: 0 Maximum value: 65535 |
auto-asic-offload | Enable/disable offloading policy traffic for hardware acceleration. enable: Enable hardware acceleration offloading. disable: Disable offloading for hardware acceleration. |
option | - |
config firewall multicast-policy
Description: Configure multicast NAT policies.
edit <id>
set status [enable|disable]
set logtraffic [enable|disable]
set srcintf {string}
set dstintf {string}
set srcaddr <name1>, <name2>, ...
set dstaddr <name1>, <name2>, ...
set snat [enable|disable]
set snat-ip {ipv4-address}
set dnat {ipv4-address-any}
set action [accept|deny]
set protocol {integer}
set start-port {integer}
set end-port {integer}
set auto-asic-offload [enable|disable]
next
end
Parameter Name | Description | Type | Size |
---|---|---|---|
status | Enable/disable this policy. enable: Enable this policy. disable: Disable this policy. |
option | - |
logtraffic | Enable/disable logging traffic accepted by this policy. enable: Enable logging traffic accepted by this policy. disable: Disable logging traffic accepted by this policy. |
option | - |
srcintf | Source interface name. | string | Maximum length: 35 |
dstintf | Destination interface name. | string | Maximum length: 35 |
srcaddr <name> |
Source address objects. Source address objects. |
string | Maximum length: 79 |
dstaddr <name> |
Destination address objects. Destination address objects. |
string | Maximum length: 79 |
snat | Enable/disable substitution of the outgoing interface IP address for the original source IP address (called source NAT or SNAT). enable: Enable source NAT. disable: Disable source NAT. |
option | - |
snat-ip | IPv4 address to be used as the source address for NATed traffic. | ipv4-address | Not Specified |
dnat | IPv4 DNAT address used for multicast destination addresses. | ipv4-address-any | Not Specified |
action | Accept or deny traffic matching the policy. accept: Accept traffic matching the policy. deny: Deny or block traffic matching the policy. |
option | - |
protocol | Integer value for the protocol type as defined by IANA (0 - 255, default = 0). | integer | Minimum value: 0 Maximum value: 255 |
start-port | Integer value for starting TCP/UDP/SCTP destination port in range (1 - 65535, default = 1). | integer | Minimum value: 0 Maximum value: 65535 |
end-port | Integer value for ending TCP/UDP/SCTP destination port in range (1 - 65535, default = 1). | integer | Minimum value: 0 Maximum value: 65535 |
auto-asic-offload | Enable/disable offloading policy traffic for hardware acceleration. enable: Enable hardware acceleration offloading. disable: Disable offloading for hardware acceleration. |
option | - |