config monitoring np6-ipsec-engine
Description: Configure NP6 IPsec engine status monitoring.
set status [enable|disable]
set interval {integer}
set threshold {user}
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | Enable/disable NP6 IPsec engine status monitoring. enable: Enable setting. disable: Disable setting. |
option | - |
| interval | IPsec engine status check interval (1 - 60 seconds, default = 1). | integer | Minimum value: 1 Maximum value: 60 |
| threshold | IPsec engine status check threshold (x x x x x x x x, 8 integers from to , default = 15 15 12 12 8 8 5 5). Example: Log is generated if IPsec engine 0 is busy each of every 15 consecutive interval checks. | user | Not Specified |
config monitoring np6-ipsec-engine
Description: Configure NP6 IPsec engine status monitoring.
set status [enable|disable]
set interval {integer}
set threshold {user}
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | Enable/disable NP6 IPsec engine status monitoring. enable: Enable setting. disable: Disable setting. |
option | - |
| interval | IPsec engine status check interval (1 - 60 seconds, default = 1). | integer | Minimum value: 1 Maximum value: 60 |
| threshold | IPsec engine status check threshold (x x x x x x x x, 8 integers from to , default = 15 15 12 12 8 8 5 5). Example: Log is generated if IPsec engine 0 is busy each of every 15 consecutive interval checks. | user | Not Specified |