config system snmp user
Description: SNMP user configuration.
edit <name>
set status [enable|disable]
set trap-status [enable|disable]
set trap-lport {integer}
set trap-rport {integer}
set queries [enable|disable]
set query-port {integer}
set notify-hosts {ipv4-address}
set notify-hosts6 {ipv6-address}
set source-ip {ipv4-address}
set source-ipv6 {ipv6-address}
set ha-direct [enable|disable]
set events {option1}, {option2}, ...
set security-level [no-auth-no-priv|auth-no-priv|...]
set auth-proto [md5|sha|...]
set auth-pwd {password}
set priv-proto [aes|des|...]
set priv-pwd {password}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | Enable/disable this SNMP user. enable: Enable setting. disable: Disable setting. |
option | - |
| trap-status | Enable/disable traps for this SNMP user. enable: Enable setting. disable: Disable setting. |
option | - |
| trap-lport | SNMPv3 local trap port (default = 162). | integer | Minimum value: 0 Maximum value: 65535 |
| trap-rport | SNMPv3 trap remote port (default = 162). | integer | Minimum value: 0 Maximum value: 65535 |
| queries | Enable/disable SNMP queries for this user. enable: Enable setting. disable: Disable setting. |
option | - |
| query-port | SNMPv3 query port (default = 161). | integer | Minimum value: 0 Maximum value: 65535 |
| notify-hosts | SNMP managers to send notifications (traps) to. | ipv4-address | Not Specified |
| notify-hosts6 | IPv6 SNMP managers to send notifications (traps) to. | ipv6-address | Not Specified |
| source-ip | Source IP for SNMP trap. | ipv4-address | Not Specified |
| source-ipv6 | Source IPv6 for SNMP trap. | ipv6-address | Not Specified |
| ha-direct | Enable/disable direct management of HA cluster members. enable: Enable setting. disable: Disable setting. |
option | - |
| events | |||
| security-level | Security level for message authentication and encryption. no-auth-no-priv: Message with no authentication and no privacy (encryption). auth-no-priv: Message with authentication but no privacy (encryption). auth-priv: Message with authentication and privacy (encryption). |
option | - |
| auth-proto | Authentication protocol. md5: HMAC-MD5-96 authentication protocol. sha: HMAC-SHA-96 authentication protocol. sha224: HMAC-SHA224 authentication protocol. sha256: HMAC-SHA256 authentication protocol. sha384: HMAC-SHA384 authentication protocol. sha512: HMAC-SHA512 authentication protocol. |
option | - |
| auth-pwd | Password for authentication protocol. | password | Not Specified |
| priv-proto | Privacy (encryption) protocol. aes: CFB128-AES-128 symmetric encryption protocol. des: CBC-DES symmetric encryption protocol. aes256: CFB128-AES-256 symmetric encryption protocol. aes256cisco: CFB128-AES-256 symmetric encryption protocol compatible with CISCO. |
option | - |
| priv-pwd | Password for privacy (encryption) protocol. | password | Not Specified |
config system snmp user
Description: SNMP user configuration.
edit <name>
set status [enable|disable]
set trap-status [enable|disable]
set trap-lport {integer}
set trap-rport {integer}
set queries [enable|disable]
set query-port {integer}
set notify-hosts {ipv4-address}
set notify-hosts6 {ipv6-address}
set source-ip {ipv4-address}
set source-ipv6 {ipv6-address}
set ha-direct [enable|disable]
set events {option1}, {option2}, ...
set security-level [no-auth-no-priv|auth-no-priv|...]
set auth-proto [md5|sha|...]
set auth-pwd {password}
set priv-proto [aes|des|...]
set priv-pwd {password}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | Enable/disable this SNMP user. enable: Enable setting. disable: Disable setting. |
option | - |
| trap-status | Enable/disable traps for this SNMP user. enable: Enable setting. disable: Disable setting. |
option | - |
| trap-lport | SNMPv3 local trap port (default = 162). | integer | Minimum value: 0 Maximum value: 65535 |
| trap-rport | SNMPv3 trap remote port (default = 162). | integer | Minimum value: 0 Maximum value: 65535 |
| queries | Enable/disable SNMP queries for this user. enable: Enable setting. disable: Disable setting. |
option | - |
| query-port | SNMPv3 query port (default = 161). | integer | Minimum value: 0 Maximum value: 65535 |
| notify-hosts | SNMP managers to send notifications (traps) to. | ipv4-address | Not Specified |
| notify-hosts6 | IPv6 SNMP managers to send notifications (traps) to. | ipv6-address | Not Specified |
| source-ip | Source IP for SNMP trap. | ipv4-address | Not Specified |
| source-ipv6 | Source IPv6 for SNMP trap. | ipv6-address | Not Specified |
| ha-direct | Enable/disable direct management of HA cluster members. enable: Enable setting. disable: Disable setting. |
option | - |
| events | |||
| security-level | Security level for message authentication and encryption. no-auth-no-priv: Message with no authentication and no privacy (encryption). auth-no-priv: Message with authentication but no privacy (encryption). auth-priv: Message with authentication and privacy (encryption). |
option | - |
| auth-proto | Authentication protocol. md5: HMAC-MD5-96 authentication protocol. sha: HMAC-SHA-96 authentication protocol. sha224: HMAC-SHA224 authentication protocol. sha256: HMAC-SHA256 authentication protocol. sha384: HMAC-SHA384 authentication protocol. sha512: HMAC-SHA512 authentication protocol. |
option | - |
| auth-pwd | Password for authentication protocol. | password | Not Specified |
| priv-proto | Privacy (encryption) protocol. aes: CFB128-AES-128 symmetric encryption protocol. des: CBC-DES symmetric encryption protocol. aes256: CFB128-AES-256 symmetric encryption protocol. aes256cisco: CFB128-AES-256 symmetric encryption protocol compatible with CISCO. |
option | - |
| priv-pwd | Password for privacy (encryption) protocol. | password | Not Specified |