config system ntp
Description: Configure system NTP information.
set ntpsync [enable|disable]
set type [fortiguard|custom]
set syncinterval {integer}
config ntpserver
Description: Configure the FortiGate to connect to any available third-party NTP server.
edit <id>
set server {string}
set ntpv3 [enable|disable]
set authentication [enable|disable]
set key {password}
set key-id {integer}
next
end
set source-ip {ipv4-address}
set source-ip6 {ipv6-address}
set server-mode [enable|disable]
set authentication [enable|disable]
set key-type [MD5|SHA1]
set key {password}
set key-id {integer}
set interface <interface-name1>, <interface-name2>, ...
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| ntpsync | Enable/disable setting the FortiGate system time by synchronizing with an NTP Server. enable: Enable synchronization with NTP Server. disable: Disable synchronization with NTP Server. |
option | - |
| type | Use the FortiGuard NTP server or any other available NTP Server. fortiguard: Use the FortiGuard NTP server. custom: Use any other available NTP server. |
option | - |
| syncinterval | NTP synchronization interval (1 - 1440 min). | integer | Minimum value: 1 Maximum value: 1440 |
| source-ip | Source IP address for communication to the NTP server. | ipv4-address | Not Specified |
| source-ip6 | Source IPv6 address for communication to the NTP server. | ipv6-address | Not Specified |
| server-mode | Enable/disable FortiGate NTP Server Mode. Your FortiGate becomes an NTP server for other devices on your network. The FortiGate relays NTP requests to its configured NTP server. enable: Enable FortiGate NTP Server Mode. disable: Disable FortiGate NTP Server Mode. |
option | - |
| authentication | Enable/disable authentication. enable: Enable authentication. disable: Disable authentication. |
option | - |
| key-type | Key type for authentication (MD5, SHA1). MD5: Use MD5 to authenticate the message. SHA1: Use SHA1 to authenticate the message. |
option | - |
| key | Key for authentication. | password | Not Specified |
| key-id | Key ID for authentication. | integer | Minimum value: 0 Maximum value: 4294967295 |
interface <interface-name> |
FortiGate interface(s) with NTP server mode enabled. Devices on your network can contact these interfaces for NTP services. Interface name. |
string | Maximum length: 79 |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| server | IP address or hostname of the NTP Server. | string | Maximum length: 63 |
| ntpv3 | Enable to use NTPv3 instead of NTPv4. enable: Enable NTPv3. disable: Disable NTPv3 (use NTPv4). |
option | - |
| authentication | Enable/disable MD5(NTPv3)/SHA1(NTPv4) authentication. enable: Enable MD5(NTPv3)/SHA1(NTPv4) authentication. disable: Disable MD5(NTPv3)/SHA1(NTPv4) authentication. |
option | - |
| key | Key for MD5(NTPv3)/SHA1(NTPv4) authentication. | password | Not Specified |
| key-id | Key ID for authentication. | integer | Minimum value: 0 Maximum value: 4294967295 |
config system ntp
Description: Configure system NTP information.
set ntpsync [enable|disable]
set type [fortiguard|custom]
set syncinterval {integer}
config ntpserver
Description: Configure the FortiGate to connect to any available third-party NTP server.
edit <id>
set server {string}
set ntpv3 [enable|disable]
set authentication [enable|disable]
set key {password}
set key-id {integer}
next
end
set source-ip {ipv4-address}
set source-ip6 {ipv6-address}
set server-mode [enable|disable]
set authentication [enable|disable]
set key-type [MD5|SHA1]
set key {password}
set key-id {integer}
set interface <interface-name1>, <interface-name2>, ...
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| ntpsync | Enable/disable setting the FortiGate system time by synchronizing with an NTP Server. enable: Enable synchronization with NTP Server. disable: Disable synchronization with NTP Server. |
option | - |
| type | Use the FortiGuard NTP server or any other available NTP Server. fortiguard: Use the FortiGuard NTP server. custom: Use any other available NTP server. |
option | - |
| syncinterval | NTP synchronization interval (1 - 1440 min). | integer | Minimum value: 1 Maximum value: 1440 |
| source-ip | Source IP address for communication to the NTP server. | ipv4-address | Not Specified |
| source-ip6 | Source IPv6 address for communication to the NTP server. | ipv6-address | Not Specified |
| server-mode | Enable/disable FortiGate NTP Server Mode. Your FortiGate becomes an NTP server for other devices on your network. The FortiGate relays NTP requests to its configured NTP server. enable: Enable FortiGate NTP Server Mode. disable: Disable FortiGate NTP Server Mode. |
option | - |
| authentication | Enable/disable authentication. enable: Enable authentication. disable: Disable authentication. |
option | - |
| key-type | Key type for authentication (MD5, SHA1). MD5: Use MD5 to authenticate the message. SHA1: Use SHA1 to authenticate the message. |
option | - |
| key | Key for authentication. | password | Not Specified |
| key-id | Key ID for authentication. | integer | Minimum value: 0 Maximum value: 4294967295 |
interface <interface-name> |
FortiGate interface(s) with NTP server mode enabled. Devices on your network can contact these interfaces for NTP services. Interface name. |
string | Maximum length: 79 |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| server | IP address or hostname of the NTP Server. | string | Maximum length: 63 |
| ntpv3 | Enable to use NTPv3 instead of NTPv4. enable: Enable NTPv3. disable: Disable NTPv3 (use NTPv4). |
option | - |
| authentication | Enable/disable MD5(NTPv3)/SHA1(NTPv4) authentication. enable: Enable MD5(NTPv3)/SHA1(NTPv4) authentication. disable: Disable MD5(NTPv3)/SHA1(NTPv4) authentication. |
option | - |
| key | Key for MD5(NTPv3)/SHA1(NTPv4) authentication. | password | Not Specified |
| key-id | Key ID for authentication. | integer | Minimum value: 0 Maximum value: 4294967295 |