Oracle Kubernetes (OKE) SDN connector

OCI SDN connectors support dynamic address groups based on Oracle Kubernetes (OKE) filters.

To filter out the Kubernetes IP addresses, the following address filters have been introduced:

k8s_compartment	Name of compartment that the Kubernetes cluster created in.
k8s_cluster	Name of Kubernetes cluster.
k8s_namespace	Namespace of a Kubernetes service or pod.
k8s_servicename	Name of a Kubernetes service.
k8s_nodename	Name of a Kubernetes node.
k8s_region	Region of a Kubernetes node.
k8s_zone	Zone of a Kubernetes node.
k8s_podname	name of a Kubernetes pod.
k8s_label.xxx	Name of label of a Kubernetes resource (cluster/service/node/Pod)

To enable an OCI SDN connector to fetch IP addresses from Oracle Kubernetes:

1. Configure the OCI SDN connector:
   1. Go to Security Fabric > Fabric Connectors.
   2. Click Create New, and select Oracle Cloud Infrastructure (OCI).
   3. Configure as shown substituting the region, tenant and client IDs, and client secret for your deployment. The update interval is in seconds.

      

2. Create dynamic firewall addresses for the configured SDN connector with supported Kubernetes filter:
   1. Go to Policy & Objects > Addresses.
   2. Click Create New, then select Address.
   3. Configure the addresses.

      

3. Confirm that the SDN connector resolves dynamic firewall IP addresses:
   1. Go to Policy & Objects > Addresses.
   2. Hover over the address created in step 2 to see a list of IP addresses for instances:

      

To configure an SDN connector through the CLI:

1. Configure the OCI SDN connector:

   config system sdn-connector

   edit "oci1"

   set type oci

   set tenant-id "ocid1.tenancy.oc1..aaaaaaaambr3uzztoyhweohbzqqdo775h7d3t54zpmzkp4b2cf35vs55cxxx"

   set user-id "ocid1.user.oc1..aaaaaaaaq2lfspeo3uetzbzpiv2pqvzzevozccnys347stwssvizqlatfxxx"

   set compartment-id "ocid1.compartment.oc1..aaaaaaaaelxxdjazqo7nzczpgypyiqcgkmytjry6nfq5345vw7eavpwnmxxx"

   set oci-region ashburn

   set oci-cert "cert-sha2"

   set update-interval 30

   next

   end

2. Create dynamic firewall addresses for the configured SDN connector with supported Kubernetes filter:

   config firewall address

   edit "k8s_nodename"

   set type dynamic

   set sdn "oci1"

   set filter "K8S_NodeName=129.213.120.172"

   next

   end

3. Confirm that the SDN connector resolves dynamic firewall IP addresses:

   config firewall address

   edit "k8s_nodename"

   set uuid 052f1420-3ab8-51e9-0cf8-6db6bc3395c0

   set type dynamic

   set sdn "oci1"

   set filter "K8S_NodeName=129.213.120.172"

   config list

   edit "10.0.32.2"

   next

   edit "10.244.2.2"

   next

   edit "10.244.2.3"

   next

   edit "10.244.2.4"

   next

   edit "10.244.2.5"

   next

   end

   next

   end