config vpn ipsec phase2-interface

Configure VPN autokey tunnel.

config vpn ipsec phase2-interface
    Description: Configure VPN autokey tunnel.
    edit <name>
        set add-route [phase1|enable|...]
        set auto-discovery-forwarder [phase1|enable|...]
        set auto-discovery-sender [phase1|enable|...]
        set auto-negotiate [enable|disable]
        set comments {var-string}
        set dhcp-ipsec [enable|disable]
        set dhgrp {option1}, {option2}, ...
        set dst-addr-type [subnet|range|...]
        set dst-end-ip {ipv4-address-any}
        set dst-end-ip6 {ipv6-address}
        set dst-name {string}
        set dst-name6 {string}
        set dst-port {integer}
        set dst-start-ip {ipv4-address-any}
        set dst-start-ip6 {ipv6-address}
        set dst-subnet {ipv4-classnet-any}
        set dst-subnet6 {ipv6-prefix}
        set encapsulation [tunnel-mode|transport-mode]
        set ipv4-df [enable|disable]
        set keepalive [enable|disable]
        set keylife-type [seconds|kbs|...]
        set keylifekbs {integer}
        set keylifeseconds {integer}
        set l2tp [enable|disable]
        set pfs [enable|disable]
        set phase1name {string}
        set proposal {option1}, {option2}, ...
        set protocol {integer}
        set replay [enable|disable]
        set route-overlap [use-old|use-new|...]
        set single-source [enable|disable]
        set src-addr-type [subnet|range|...]
        set src-end-ip {ipv4-address-any}
        set src-end-ip6 {ipv6-address}
        set src-name {string}
        set src-name6 {string}
        set src-port {integer}
        set src-start-ip {ipv4-address-any}
        set src-start-ip6 {ipv6-address}
        set src-subnet {ipv4-classnet-any}
        set src-subnet6 {ipv6-prefix}
    next
end

config vpn ipsec phase2-interface

Parameter

Description

Type

Size

add-route

Enable/disable automatic route addition.

option

Option	Description
phase1	Add route according to phase1 add-route setting.
enable	Add route for remote proxy ID.
disable	Do not add route for remote proxy ID.

auto-discovery-forwarder

Enable/disable forwarding short-cut messages.

option

Option	Description
phase1	Forward short-cut messages according to the phase1 auto-discovery-forwarder setting.
enable	Enable forwarding auto-discovery short-cut messages.
disable	Disable forwarding auto-discovery short-cut messages.

auto-discovery-sender

Enable/disable sending short-cut messages.

option

Option	Description
phase1	Send short-cut messages according to the phase1 auto-discovery-sender setting.
enable	Enable sending auto-discovery short-cut messages.
disable	Disable sending auto-discovery short-cut messages.

auto-negotiate

Enable/disable IPsec SA auto-negotiation.

option

Option	Description
enable	Enable setting.
disable	Disable setting.

comments

Comment.

var-string

Maximum length: 255

dhcp-ipsec

Enable/disable DHCP-IPsec.

option

Option	Description
enable	Enable setting.
disable	Disable setting.

dhgrp

Phase2 DH group.

option

Option	Description
1	DH Group 1.
2	DH Group 2.
5	DH Group 5.
14	DH Group 14.
15	DH Group 15.
16	DH Group 16.
17	DH Group 17.
18	DH Group 18.
19	DH Group 19.
20	DH Group 20.
21	DH Group 21.
27	DH Group 27.
28	DH Group 28.
29	DH Group 29.
30	DH Group 30.
31	DH Group 31.
32	DH Group 32.

dst-addr-type

Remote proxy ID type.

option

Option	Description
subnet	IPv4 subnet.
range	IPv4 range.
ip	IPv4 IP.
name	IPv4 firewall address or group name.
subnet6	IPv6 subnet.
range6	IPv6 range.
ip6	IPv6 IP.
name6	IPv6 firewall address or group name.

dst-end-ip

Remote proxy ID IPv4 end.

ipv4-address-any

Not Specified

dst-end-ip6

Remote proxy ID IPv6 end.

ipv6-address

Not Specified

dst-name

Remote proxy ID name.

string

Maximum length: 79

dst-name6

Remote proxy ID name.

string

Maximum length: 79

dst-port

Quick mode destination port.

integer

Minimum value: 0 Maximum value: 65535

dst-start-ip

Remote proxy ID IPv4 start.

ipv4-address-any

Not Specified

dst-start-ip6

Remote proxy ID IPv6 start.

ipv6-address

Not Specified

dst-subnet

Remote proxy ID IPv4 subnet.

ipv4-classnet-any

Not Specified

dst-subnet6

Remote proxy ID IPv6 subnet.

ipv6-prefix

Not Specified

encapsulation

ESP encapsulation mode.

option

Option	Description
tunnel-mode	Use tunnel mode encapsulation.
transport-mode	Use transport mode encapsulation.

ipv4-df

Enable/disable setting and resetting of IPv4 'Don't Fragment' bit.

option

Option	Description
enable	Set IPv4 DF.
disable	Reset IPv4 DF.

keepalive

Enable/disable keep alive.

option

Option	Description
enable	Enable setting.
disable	Disable setting.

keylife-type

Keylife type.

option

Option	Description
seconds	Key life in seconds.
kbs	Key life in kilobytes.
both	Key life both.

keylifekbs

Phase2 key life in number of kilobytes of traffic.

integer

Minimum value: 5120 Maximum value: 4294967295

keylifeseconds

Phase2 key life in time in seconds.

integer

Minimum value: 120 Maximum value: 172800

l2tp

Enable/disable L2TP over IPsec.

option

Option	Description
enable	Enable L2TP over IPsec.
disable	Disable L2TP over IPsec.

name

IPsec tunnel name.

string

Maximum length: 35

pfs

Enable/disable PFS feature.

option

Option	Description
enable	Enable setting.
disable	Disable setting.

phase1name

Phase 1 determines the options required for phase 2.

string

Maximum length: 15

proposal

Phase2 proposal.

option

Option	Description
null-md5	null-md5
null-sha1	null-sha1
null-sha256	null-sha256
null-sha384	null-sha384
null-sha512	null-sha512
des-null	des-null
des-md5	des-md5
des-sha1	des-sha1
des-sha256	des-sha256
des-sha384	des-sha384
des-sha512	des-sha512
3des-null	3des-null
3des-md5	3des-md5
3des-sha1	3des-sha1
3des-sha256	3des-sha256
3des-sha384	3des-sha384
3des-sha512	3des-sha512
aes128-null	aes128-null
aes128-md5	aes128-md5
aes128-sha1	aes128-sha1
aes128-sha256	aes128-sha256
aes128-sha384	aes128-sha384
aes128-sha512	aes128-sha512
aes128gcm	aes128gcm
aes192-null	aes192-null
aes192-md5	aes192-md5
aes192-sha1	aes192-sha1
aes192-sha256	aes192-sha256
aes192-sha384	aes192-sha384
aes192-sha512	aes192-sha512
aes256-null	aes256-null
aes256-md5	aes256-md5
aes256-sha1	aes256-sha1
aes256-sha256	aes256-sha256
aes256-sha384	aes256-sha384
aes256-sha512	aes256-sha512
aes256gcm	aes256gcm
chacha20poly1305	chacha20poly1305
aria128-null	aria128-null
aria128-md5	aria128-md5
aria128-sha1	aria128-sha1
aria128-sha256	aria128-sha256
aria128-sha384	aria128-sha384
aria128-sha512	aria128-sha512
aria192-null	aria192-null
aria192-md5	aria192-md5
aria192-sha1	aria192-sha1
aria192-sha256	aria192-sha256
aria192-sha384	aria192-sha384
aria192-sha512	aria192-sha512
aria256-null	aria256-null
aria256-md5	aria256-md5
aria256-sha1	aria256-sha1
aria256-sha256	aria256-sha256
aria256-sha384	aria256-sha384
aria256-sha512	aria256-sha512
seed-null	seed-null
seed-md5	seed-md5
seed-sha1	seed-sha1
seed-sha256	seed-sha256
seed-sha384	seed-sha384
seed-sha512	seed-sha512

protocol

Quick mode protocol selector.

integer

Minimum value: 0 Maximum value: 255

replay

Enable/disable replay detection.

option

Option	Description
enable	Enable setting.
disable	Disable setting.

route-overlap

Action for overlapping routes.

option

Option	Description
use-old	Use the old route and do not add the new route.
use-new	Delete the old route and add the new route.
allow	Allow overlapping routes.

single-source

Enable/disable single source IP restriction.

option

Option	Description
enable	Only single source IP will be accepted.
disable	Source IP range will be accepted.

src-addr-type

Local proxy ID type.

option

Option	Description
subnet	IPv4 subnet.
range	IPv4 range.
ip	IPv4 IP.
name	IPv4 firewall address or group name.
subnet6	IPv6 subnet.
range6	IPv6 range.
ip6	IPv6 IP.
name6	IPv6 firewall address or group name.

src-end-ip

Local proxy ID end.

ipv4-address-any

Not Specified

src-end-ip6

Local proxy ID IPv6 end.

ipv6-address

Not Specified

src-name

Local proxy ID name.

string

Maximum length: 79

src-name6

Local proxy ID name.

string

Maximum length: 79

src-port

Quick mode source port.

integer

Minimum value: 0 Maximum value: 65535

src-start-ip

Local proxy ID start.

ipv4-address-any

Not Specified

src-start-ip6

Local proxy ID IPv6 start.

ipv6-address

Not Specified

src-subnet

Local proxy ID subnet.

ipv4-classnet-any

Not Specified

src-subnet6

Local proxy ID IPv6 subnet.

ipv6-prefix

Not Specified

config vpn ipsec phase2-interface

Configure VPN autokey tunnel.

config vpn ipsec phase2-interface
    Description: Configure VPN autokey tunnel.
    edit <name>
        set add-route [phase1|enable|...]
        set auto-discovery-forwarder [phase1|enable|...]
        set auto-discovery-sender [phase1|enable|...]
        set auto-negotiate [enable|disable]
        set comments {var-string}
        set dhcp-ipsec [enable|disable]
        set dhgrp {option1}, {option2}, ...
        set dst-addr-type [subnet|range|...]
        set dst-end-ip {ipv4-address-any}
        set dst-end-ip6 {ipv6-address}
        set dst-name {string}
        set dst-name6 {string}
        set dst-port {integer}
        set dst-start-ip {ipv4-address-any}
        set dst-start-ip6 {ipv6-address}
        set dst-subnet {ipv4-classnet-any}
        set dst-subnet6 {ipv6-prefix}
        set encapsulation [tunnel-mode|transport-mode]
        set ipv4-df [enable|disable]
        set keepalive [enable|disable]
        set keylife-type [seconds|kbs|...]
        set keylifekbs {integer}
        set keylifeseconds {integer}
        set l2tp [enable|disable]
        set pfs [enable|disable]
        set phase1name {string}
        set proposal {option1}, {option2}, ...
        set protocol {integer}
        set replay [enable|disable]
        set route-overlap [use-old|use-new|...]
        set single-source [enable|disable]
        set src-addr-type [subnet|range|...]
        set src-end-ip {ipv4-address-any}
        set src-end-ip6 {ipv6-address}
        set src-name {string}
        set src-name6 {string}
        set src-port {integer}
        set src-start-ip {ipv4-address-any}
        set src-start-ip6 {ipv6-address}
        set src-subnet {ipv4-classnet-any}
        set src-subnet6 {ipv6-prefix}
    next
end

config vpn ipsec phase2-interface

Parameter

Description

Type

Size

add-route

Enable/disable automatic route addition.

option

Option	Description
phase1	Add route according to phase1 add-route setting.
enable	Add route for remote proxy ID.
disable	Do not add route for remote proxy ID.

auto-discovery-forwarder

Enable/disable forwarding short-cut messages.

option

Option	Description
phase1	Forward short-cut messages according to the phase1 auto-discovery-forwarder setting.
enable	Enable forwarding auto-discovery short-cut messages.
disable	Disable forwarding auto-discovery short-cut messages.

auto-discovery-sender

Enable/disable sending short-cut messages.

option

Option	Description
phase1	Send short-cut messages according to the phase1 auto-discovery-sender setting.
enable	Enable sending auto-discovery short-cut messages.
disable	Disable sending auto-discovery short-cut messages.

auto-negotiate

Enable/disable IPsec SA auto-negotiation.

option

Option	Description
enable	Enable setting.
disable	Disable setting.

comments

Comment.

var-string

Maximum length: 255

dhcp-ipsec

Enable/disable DHCP-IPsec.

option

Option	Description
enable	Enable setting.
disable	Disable setting.

dhgrp

Phase2 DH group.

option

Option	Description
1	DH Group 1.
2	DH Group 2.
5	DH Group 5.
14	DH Group 14.
15	DH Group 15.
16	DH Group 16.
17	DH Group 17.
18	DH Group 18.
19	DH Group 19.
20	DH Group 20.
21	DH Group 21.
27	DH Group 27.
28	DH Group 28.
29	DH Group 29.
30	DH Group 30.
31	DH Group 31.
32	DH Group 32.

dst-addr-type

Remote proxy ID type.

option

Option	Description
subnet	IPv4 subnet.
range	IPv4 range.
ip	IPv4 IP.
name	IPv4 firewall address or group name.
subnet6	IPv6 subnet.
range6	IPv6 range.
ip6	IPv6 IP.
name6	IPv6 firewall address or group name.

dst-end-ip

Remote proxy ID IPv4 end.

ipv4-address-any

Not Specified

dst-end-ip6

Remote proxy ID IPv6 end.

ipv6-address

Not Specified

dst-name

Remote proxy ID name.

string

Maximum length: 79

dst-name6

Remote proxy ID name.

string

Maximum length: 79

dst-port

Quick mode destination port.

integer

Minimum value: 0 Maximum value: 65535

dst-start-ip

Remote proxy ID IPv4 start.

ipv4-address-any

Not Specified

dst-start-ip6

Remote proxy ID IPv6 start.

ipv6-address

Not Specified

dst-subnet

Remote proxy ID IPv4 subnet.

ipv4-classnet-any

Not Specified

dst-subnet6

Remote proxy ID IPv6 subnet.

ipv6-prefix

Not Specified

encapsulation

ESP encapsulation mode.

option

Option	Description
tunnel-mode	Use tunnel mode encapsulation.
transport-mode	Use transport mode encapsulation.

ipv4-df

Enable/disable setting and resetting of IPv4 'Don't Fragment' bit.

option

Option	Description
enable	Set IPv4 DF.
disable	Reset IPv4 DF.

keepalive

Enable/disable keep alive.

option

Option	Description
enable	Enable setting.
disable	Disable setting.

keylife-type

Keylife type.

option

Option	Description
seconds	Key life in seconds.
kbs	Key life in kilobytes.
both	Key life both.

keylifekbs

Phase2 key life in number of kilobytes of traffic.

integer

Minimum value: 5120 Maximum value: 4294967295

keylifeseconds

Phase2 key life in time in seconds.

integer

Minimum value: 120 Maximum value: 172800

l2tp

Enable/disable L2TP over IPsec.

option

Option	Description
enable	Enable L2TP over IPsec.
disable	Disable L2TP over IPsec.

name

IPsec tunnel name.

string

Maximum length: 35

pfs

Enable/disable PFS feature.

option

Option	Description
enable	Enable setting.
disable	Disable setting.

phase1name

Phase 1 determines the options required for phase 2.

string

Maximum length: 15

proposal

Phase2 proposal.

option

Option	Description
null-md5	null-md5
null-sha1	null-sha1
null-sha256	null-sha256
null-sha384	null-sha384
null-sha512	null-sha512
des-null	des-null
des-md5	des-md5
des-sha1	des-sha1
des-sha256	des-sha256
des-sha384	des-sha384
des-sha512	des-sha512
3des-null	3des-null
3des-md5	3des-md5
3des-sha1	3des-sha1
3des-sha256	3des-sha256
3des-sha384	3des-sha384
3des-sha512	3des-sha512
aes128-null	aes128-null
aes128-md5	aes128-md5
aes128-sha1	aes128-sha1
aes128-sha256	aes128-sha256
aes128-sha384	aes128-sha384
aes128-sha512	aes128-sha512
aes128gcm	aes128gcm
aes192-null	aes192-null
aes192-md5	aes192-md5
aes192-sha1	aes192-sha1
aes192-sha256	aes192-sha256
aes192-sha384	aes192-sha384
aes192-sha512	aes192-sha512
aes256-null	aes256-null
aes256-md5	aes256-md5
aes256-sha1	aes256-sha1
aes256-sha256	aes256-sha256
aes256-sha384	aes256-sha384
aes256-sha512	aes256-sha512
aes256gcm	aes256gcm
chacha20poly1305	chacha20poly1305
aria128-null	aria128-null
aria128-md5	aria128-md5
aria128-sha1	aria128-sha1
aria128-sha256	aria128-sha256
aria128-sha384	aria128-sha384
aria128-sha512	aria128-sha512
aria192-null	aria192-null
aria192-md5	aria192-md5
aria192-sha1	aria192-sha1
aria192-sha256	aria192-sha256
aria192-sha384	aria192-sha384
aria192-sha512	aria192-sha512
aria256-null	aria256-null
aria256-md5	aria256-md5
aria256-sha1	aria256-sha1
aria256-sha256	aria256-sha256
aria256-sha384	aria256-sha384
aria256-sha512	aria256-sha512
seed-null	seed-null
seed-md5	seed-md5
seed-sha1	seed-sha1
seed-sha256	seed-sha256
seed-sha384	seed-sha384
seed-sha512	seed-sha512

protocol

Quick mode protocol selector.

integer

Minimum value: 0 Maximum value: 255

replay

Enable/disable replay detection.

option

Option	Description
enable	Enable setting.
disable	Disable setting.

route-overlap

Action for overlapping routes.

option

Option	Description
use-old	Use the old route and do not add the new route.
use-new	Delete the old route and add the new route.
allow	Allow overlapping routes.

single-source

Enable/disable single source IP restriction.

option

Option	Description
enable	Only single source IP will be accepted.
disable	Source IP range will be accepted.

src-addr-type

Local proxy ID type.

option

Option	Description
subnet	IPv4 subnet.
range	IPv4 range.
ip	IPv4 IP.
name	IPv4 firewall address or group name.
subnet6	IPv6 subnet.
range6	IPv6 range.
ip6	IPv6 IP.
name6	IPv6 firewall address or group name.

src-end-ip

Local proxy ID end.

ipv4-address-any

Not Specified

src-end-ip6

Local proxy ID IPv6 end.

ipv6-address

Not Specified

src-name

Local proxy ID name.

string

Maximum length: 79

src-name6

Local proxy ID name.

string

Maximum length: 79

src-port

Quick mode source port.

integer

Minimum value: 0 Maximum value: 65535

src-start-ip

Local proxy ID start.

ipv4-address-any

Not Specified

src-start-ip6

Local proxy ID IPv6 start.

ipv6-address

Not Specified

src-subnet

Local proxy ID subnet.

ipv4-classnet-any

Not Specified

src-subnet6

Local proxy ID IPv6 subnet.

ipv6-prefix

Not Specified

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

config vpn ipsec phase2-interface

config vpn ipsec phase2-interface

config vpn ipsec phase2-interface

config vpn ipsec phase2-interface

config vpn ipsec phase2-interface

config vpn ipsec phase2-interface