Fortinet white logo
Fortinet white logo

CLI Reference

config system switch-interface

config system switch-interface

Configure software switch interfaces by grouping physical and WiFi interfaces.

config system switch-interface
    Description: Configure software switch interfaces by grouping physical and WiFi interfaces.
    edit <name>
        set intra-switch-policy [implicit|explicit]
        set member <interface-name1>, <interface-name2>, ...
        set span [disable|enable]
        set span-dest-port {string}
        set span-direction [rx|tx|...]
        set span-source-port <interface-name1>, <interface-name2>, ...
        set type [switch|hub]
        set vdom {string}
    next
end

config system switch-interface

Parameter

Description

Type

Size

intra-switch-policy

Allow any traffic between switch interfaces or require firewall policies to allow traffic between switch interfaces.

option

-

Option

Description

implicit

Traffic between switch members is implicitly allowed.

explicit

Traffic between switch members must match firewall policies.

member <interface-name>

Names of the interfaces that belong to the virtual switch.

Physical interface name.

string

Maximum length: 79

name

Interface name (name cannot be in use by any other interfaces, VLANs, or inter-VDOM links).

string

Maximum length: 15

span

Enable/disable port spanning. Port spanning echoes traffic received by the software switch to the span destination port.

option

-

Option

Description

disable

Disable port spanning.

enable

Enable port spanning.

span-dest-port

SPAN destination port name. All traffic on the SPAN source ports is echoed to the SPAN destination port.

string

Maximum length: 15

span-direction

The direction in which the SPAN port operates, either: rx, tx, or both.

option

-

Option

Description

rx

Copies only received packets from source SPAN ports to the destination SPAN port.

tx

Copies only transmitted packets from source SPAN ports to the destination SPAN port.

both

Copies both received and transmitted packets from source SPAN ports to the destination SPAN port.

span-source-port <interface-name>

Physical interface name. Port spanning echoes all traffic on the SPAN source ports to the SPAN destination port.

Physical interface name.

string

Maximum length: 79

type

Type of switch based on functionality: switch for normal functionality, or hub to duplicate packets to all port members.

option

-

Option

Description

switch

Switch for normal switch functionality (available in NAT mode only).

hub

Hub to duplicate packets to all member ports.

vdom

VDOM that the software switch belongs to.

string

Maximum length: 31

config system switch-interface

config system switch-interface

Configure software switch interfaces by grouping physical and WiFi interfaces.

config system switch-interface
    Description: Configure software switch interfaces by grouping physical and WiFi interfaces.
    edit <name>
        set intra-switch-policy [implicit|explicit]
        set member <interface-name1>, <interface-name2>, ...
        set span [disable|enable]
        set span-dest-port {string}
        set span-direction [rx|tx|...]
        set span-source-port <interface-name1>, <interface-name2>, ...
        set type [switch|hub]
        set vdom {string}
    next
end

config system switch-interface

Parameter

Description

Type

Size

intra-switch-policy

Allow any traffic between switch interfaces or require firewall policies to allow traffic between switch interfaces.

option

-

Option

Description

implicit

Traffic between switch members is implicitly allowed.

explicit

Traffic between switch members must match firewall policies.

member <interface-name>

Names of the interfaces that belong to the virtual switch.

Physical interface name.

string

Maximum length: 79

name

Interface name (name cannot be in use by any other interfaces, VLANs, or inter-VDOM links).

string

Maximum length: 15

span

Enable/disable port spanning. Port spanning echoes traffic received by the software switch to the span destination port.

option

-

Option

Description

disable

Disable port spanning.

enable

Enable port spanning.

span-dest-port

SPAN destination port name. All traffic on the SPAN source ports is echoed to the SPAN destination port.

string

Maximum length: 15

span-direction

The direction in which the SPAN port operates, either: rx, tx, or both.

option

-

Option

Description

rx

Copies only received packets from source SPAN ports to the destination SPAN port.

tx

Copies only transmitted packets from source SPAN ports to the destination SPAN port.

both

Copies both received and transmitted packets from source SPAN ports to the destination SPAN port.

span-source-port <interface-name>

Physical interface name. Port spanning echoes all traffic on the SPAN source ports to the SPAN destination port.

Physical interface name.

string

Maximum length: 79

type

Type of switch based on functionality: switch for normal functionality, or hub to duplicate packets to all port members.

option

-

Option

Description

switch

Switch for normal switch functionality (available in NAT mode only).

hub

Hub to duplicate packets to all member ports.

vdom

VDOM that the software switch belongs to.

string

Maximum length: 31