config wireless-controller wag-profile
Configure wireless access gateway (WAG) profiles used for tunnels on AP.
config wireless-controller wag-profile
Description: Configure wireless access gateway (WAG) profiles used for tunnels on AP.
edit <name>
set comment {var-string}
set tunnel-type [l2tpv3|gre]
set wag-ip {ipv4-address}
set wag-port {integer}
set ping-interval {integer}
set ping-number {integer}
set return-packet-timeout {integer}
set dhcp-ip-addr {ipv4-address}
next
end
config wireless-controller wag-profile
|
Parameter |
Description |
Type |
Size |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
comment |
Comment. |
var-string |
Maximum length: 255 |
|||||||
|
tunnel-type |
Tunnel type. |
option |
- |
|||||||
|
|
|
|||||||||
|
wag-ip |
IP Address of the wireless access gateway. |
ipv4-address |
Not Specified |
|||||||
|
wag-port |
UDP port of the wireless access gateway. |
integer |
Minimum value: 0 Maximum value: 65535 |
|||||||
|
ping-interval |
Interval between two tunnel monitoring echo packets . |
integer |
Minimum value: 1 Maximum value: 65535 |
|||||||
|
ping-number |
Number of the tunnel monitoring echo packets . |
integer |
Minimum value: 1 Maximum value: 65535 |
|||||||
|
return-packet-timeout |
Window of time for the return packets from the tunnel's remote end . |
integer |
Minimum value: 1 Maximum value: 65535 |
|||||||
|
dhcp-ip-addr |
IP address of the monitoring DHCP request packet sent through the tunnel. |
ipv4-address |
Not Specified |
|||||||