config wireless-controller inter-controller
Description: Configure inter wireless controller operation.
set inter-controller-mode [disable|l2-roaming|...]
set inter-controller-key {password}
set inter-controller-pri [primary|secondary]
set fast-failover-max {integer}
set fast-failover-wait {integer}
config inter-controller-peer
Description: Fast failover peer wireless controller list.
edit <id>
set peer-ip {ipv4-address}
set peer-port {integer}
set peer-priority [primary|secondary]
next
end
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| inter-controller-mode | Configure inter-controller mode (disable, l2-roaming, 1+1, default = disable). disable: Disable inter-controller mode. l2-roaming: Enable layer 2 roaming support between inter-controllers. 1+1: Enable 1+1 fast failover mode. |
option | - |
| inter-controller-key | Secret key for inter-controller communications. | password | Not Specified |
| inter-controller-pri | Configure inter-controller's priority (primary or secondary, default = primary). primary: Primary fast failover mode. secondary: Secondary fast failover mode. |
option | - |
| fast-failover-max | Maximum number of retransmissions for fast failover HA messages between peer wireless controllers (3 - 64, default = 10). | integer | Minimum value: 3 Maximum value: 64 |
| fast-failover-wait | Minimum wait time before an AP transitions from secondary controller to primary controller (10 - 86400 sec, default = 10). | integer | Minimum value: 10 Maximum value: 86400 |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| peer-ip | Peer wireless controller's IP address. | ipv4-address | Not Specified |
| peer-port | Port used by the wireless controller's for inter-controller communications (1024 - 49150, default = 5246). | integer | Minimum value: 1024 Maximum value: 49150 |
| peer-priority | Peer wireless controller's priority (primary or secondary, default = primary). primary: Primary fast failover mode. secondary: Secondary fast failover mode. |
option | - |
config wireless-controller inter-controller
Description: Configure inter wireless controller operation.
set inter-controller-mode [disable|l2-roaming|...]
set inter-controller-key {password}
set inter-controller-pri [primary|secondary]
set fast-failover-max {integer}
set fast-failover-wait {integer}
config inter-controller-peer
Description: Fast failover peer wireless controller list.
edit <id>
set peer-ip {ipv4-address}
set peer-port {integer}
set peer-priority [primary|secondary]
next
end
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| inter-controller-mode | Configure inter-controller mode (disable, l2-roaming, 1+1, default = disable). disable: Disable inter-controller mode. l2-roaming: Enable layer 2 roaming support between inter-controllers. 1+1: Enable 1+1 fast failover mode. |
option | - |
| inter-controller-key | Secret key for inter-controller communications. | password | Not Specified |
| inter-controller-pri | Configure inter-controller's priority (primary or secondary, default = primary). primary: Primary fast failover mode. secondary: Secondary fast failover mode. |
option | - |
| fast-failover-max | Maximum number of retransmissions for fast failover HA messages between peer wireless controllers (3 - 64, default = 10). | integer | Minimum value: 3 Maximum value: 64 |
| fast-failover-wait | Minimum wait time before an AP transitions from secondary controller to primary controller (10 - 86400 sec, default = 10). | integer | Minimum value: 10 Maximum value: 86400 |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| peer-ip | Peer wireless controller's IP address. | ipv4-address | Not Specified |
| peer-port | Port used by the wireless controller's for inter-controller communications (1024 - 49150, default = 5246). | integer | Minimum value: 1024 Maximum value: 49150 |
| peer-priority | Peer wireless controller's priority (primary or secondary, default = primary). primary: Primary fast failover mode. secondary: Secondary fast failover mode. |
option | - |