Link log messages
The log messages in this section are for link issues.
Physical port active or inactive trunk member
|
ID |
1000 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
|
|
Meaning |
The specified physical port is now an active or inactive member of the specified trunk. |
Adding or removing trunk member failed
|
ID |
1001 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
|
|
Meaning |
The specified physical port is now an active or inactive member of the specified trunk. |
DMI port changed
|
ID |
1050 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"<port_name>\" |
|
Meaning |
There was a change in the physical port used for the diagnostic monitoring interface (DMI). |
Trunk status
|
ID |
1200 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Warning |
|
Message |
msg=\"<port_name>\" |
|
Meaning |
One of the members of a trunk is down. |
Loopback error
|
ID |
1250 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Warning |
|
Message |
msg=\"An illegal loopback occurred on adapter (<port_name>)\nCheck the configuration to verify that all adapters are connected to 802.3ad compliant switch ports.\" |
|
Meaning |
A loopback occurred in a link aggregation group (LAG). |
ICL ACL change
|
ID |
1300 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"MCLAG: ICL ACL change ingress-port-bitmap=<port_name>, egress-block-port-bitmap=<port_name>\" |
|
Meaning |
There was a change in the access control list (ACL) policy used by the MCLAG ICL trunk. |
An MCLAG peer lost
|
ID |
1301 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"MCLAG: lost peer info for trunk(<trunk_name>) peer-timeout(<time>) sb(<split-brain>)\" |
|
Meaning |
The FortiSwitch unit cannot detect one of the MCLAG peers. |
Model mismatch of MCLAG peers
|
ID |
1302 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Warning |
|
Message |
msg=\"MCLAG: **Unsupported config, peer model mismatch local-model(<switch1_model>) peer-model(<peer_switch2_model>)\" |
|
Meaning |
The MCLAG peers are different FortiSwitch models. |
Model mismatch of MCLAG peers fixed
|
ID |
1303 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"MCLAG: Cleared **Unsupported config, peer model mismatch local-model(<switch1_model>) peer-model(<switch2_model>)\" |
|
Meaning |
The MCLAG peers have been changed to be the same FortiSwitch model. |
Software mismatch of MCLAG peers
|
ID |
1304 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Warning |
|
Message |
msg=\"MCLAG: **peer software mismatch local-software(<switch1_firmware>) peer-software(<switch2_firmware>)\" |
|
Meaning |
The MCLAG peers are running different versions of FortiSwitchOS. |
Software mismatch of MCLAG peers fixed
|
ID |
1305 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"MCLAG: Cleared **peer software mismatch local-software(<switch1_firmware>) peer-software(<switch2_firmware>)\" |
|
Meaning |
The MCLAG peers are now running the same version of FortiSwitchOS. |
One MCLAG peer link up
|
ID |
1306 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"MCLAG: <trunk_name> at least one peer link up\" |
|
Meaning |
One or more of the MCLAG peer links is up. |
All MCLAG peer links down
|
ID |
1307 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"MCLAG: <trunk_name> all peer link down\" |
|
Meaning |
All MCLAG peer links are down. |
MCLAG peer misconfigured
|
ID |
1308 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"MCLAG: <trunk_name> peer misconfigured\" |
|
Meaning |
One of the MCLAG peers is misconfigured. |
MCLAG peer misconfigured fixed
|
ID |
1309 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"MCLAG: <trunk_name> peer misconfiguration cleared\" |
|
Meaning |
The MCLAG peers are configured correctly now. |
MCLAG misconfigured
|
ID |
1310 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Critical |
|
Message |
msg=\"MCLAG: misconfigured out of LAG table entry\" |
|
Meaning |
The MCLAG is misconfigured. |
MAC addresses unsynchronized in MCLAG peers
|
ID |
1311 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Warning |
|
Message |
msg=\"MCLAG:<trunk_name> ports=<port_name> MAC mismatch local-mac= peer-mac=\" |
|
Meaning |
MAC addresses in MCLAG peers are not synchronized. |
ACL failure
|
ID |
1312 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Critical |
|
Message |
msg=\"MCLAG: ACL failures are detected\" |
|
Meaning |
The access control list (ACL) in the MCLAG failed. |
MCLAG peer joined
|
ID |
1313 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"MCLAG peer <switch_interface> joined.\" |
|
Meaning |
A peer switch has joined the MCLAG. |
Split-brain state detected
|
ID |
1314 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Critical |
|
Message |
msg=\"MCLAG split-brain occured, this switch may go to dormant.\" |
|
Meaning |
When the split-brain state occurs, one of switches in the MCLAG goes dormant. Any devices connected to the dormant switch will lose network connectivity. The switch that goes dormant is the switch with the lowest numerical MAC address between the two peers. |
Switch port up
|
ID |
1400 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Information |
|
Message |
msg=\"<switch_serial_number> switch port <port_name> has come up\" |
|
Meaning |
The specified FortiSwitch port is now up. |
Switch port down
|
ID |
1401 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Information |
|
Message |
msg=\"<switch_serial_number> switch port <port_name> has gone down\" |
|
Meaning |
The specified FortiSwitch port is now down. |
Switch interface link changed
|
ID |
1450 |
|
Type |
Event log |
|
Subtype |
Link |
|
Severity |
Notice |
|
Message |
msg=\"interface <interface_name> link status is <status>\" |
|
Meaning |
The status of the specified interface link has changed. |