Resolved issues
The following issues have been fixed in FortiSwitchOS 7.0.7. For inquiries about a particular bug, please contact Customer Service & Support.
| Bug ID | Description |
|---|---|
| 463161 | There is an “Invalid root configuration data” error reported after the firmware is upgraded. |
| 769456 | Support needed for PoE compatibility for the FS-124F-POE, FS-124F-FPOE, FS-148F-POE, and FS-148F-FPOE models. |
| 829804 | Changed which CLI commands are available, depending on whether the user has the enhanced debugging license. |
| 848619 | When connecting FS-124F-POE to FS-148F-POE with the FTLF8519P3BNLFTN, the SFP module port does not come up on the FS-148F-POE when auto-module is configured. |
| 856123 | When the network-monitor settings are enabled, there are multiple “CPU_SENSOR (78.0%)
cleared warning threshold of (85.0%)” messages in the log. |
|
860773 |
The output of the |
|
872727 |
After upgrading the FS-448D-FPOE model, the status of PSU2 is wrongly reported as “Not inserted.” |
|
896010 |
The FS-524D and FS-524D-FPOE models will assign two split ports with the same physical MAC address. |
|
902493 |
The FS-148F-FPOE and FS-148F-POE models need to provide power over Ethernet (PoE) power to Cisco phones with Key Expansion Modules (KEMs). |
|
904617 |
After a switch is rebooted, the Open Shortest Path First (OSPF) protocol advertises incorrect routes. |
|
906594 |
The GUI needs to support static IP/32. |
|
914774 |
Enabling energy-efficient Ethernet (EEE) on the FS-448E-POE disrupts traffic. |
|
917919 |
The GUI produces an “Internal server error” after an administrator user that is more than 35 characters long tries to log in. |
|
924247 |
Sticky MAC addresses and the MAC learning limit are not working on the FS-1xx models. |