Configuring ports using the GUI
You can use the WiFi & Switch Controller > FortiSwitch Ports page to do the following with FortiSwitch switch ports:
- Set the native VLAN and add more VLANs
- Edit the description of the port
- Enable or disable the port
- Set the access mode to network access control (NAC) or normal
- Enable or disable PoE for the port
- Enable or disable DHCP snooping (if supported by the port)
- Enable or disable whether a port is an edge port
- Enable or disable STP (if supported by the port)
- Enable or disable loop guard (if supported by the port)
- Enable or disable STP BPDU guard (if supported by the port)
- Enable or disable STP root guard (if supported by the port)