Add Pingable
-
Add a pingable device in FortiNAC.
-
Navigate to Network > Inventory.
-
Select the Container icon.
-
Right-click the container and select Add Pingable Device.
-
Under the Element tab, configure using the table below.
Field Definitions – Add Pingable Device
|
Field |
Definition |
|
Container |
Container in the Topology View tree where the 3rd Party SSO Device is stored. |
|
Name |
Name of 3rd Party SSO Device |
|
IP Address |
IP address of 3rd Party SSO Device |
|
Physical Address |
The MAC address of 3rd Party SSO Device |
|
Device Type |
Select Firewall or Server. |
|
Incoming Events |
Select Not Applicable. |
|
SSO Agent |
Select the applicable data to be used (Custom Script or RADIUS) |
|
Role |
The Role for this device. Available roles appear in the drop-down list. |
|
RADIUS Accounting Port |
Displayed when RADIUS is selected. Port on the Fortinet Single Sign-On User Agent configured to receive RADIUS Accounting messages from external devices. This port must match the port configured in Fortinet. |
|
RADIUS Secret |
Displayed when RADIUS is selected. Must match the RADIUS secret configured for FortiNAC in Fortinet. |
|
Apply to Group |
Select this check box to apply the Custom Script SSO options only to the selected Host group in the drop-down list. If you do not select the check box, the SSO options are applied to all Host groups. |
|
Description |
Description of the 3rd Party SSO Device entered by the Administrator. |
|
Note |
User specified notes about the device. |
|
Contact Status Polling |
Enable or disable contact status polling for the selected device. |
|
Poll Interval |
Determines how often the device should be polled for communication status. Time is stored in minutes. |