Device Model Configuration
Logical Networks: For more information, see Logical Networks in the Administration Guide.
Multiple VDOM/Split-Task VDOMs: Must be configured for each VDOM to be managed.
-
With the FortiGate’s model selected in the left panel, click the Virtualized Devices tab in the right panel.
-
Click the desired VDOM, right click and select Model Configuration.
-
Configure RADIUS Mode and settings (if applicable). Click the for details on each setting.
-
Under Logical Network Configuration, select the VLANs from the drill-down in the Network Access column for each Logical Network as they apply:
-
Isolation VLANs (Registration, Remediation, Dead End, Authentication)
-
Production VLANs
-
Default VLAN (the “catch all” VLAN for registered endpoints)
To modify an existing Logical Network in the table, select and click Edit.
Important: The list of VLANs displayed in the drill-down contains all VLANs configured for all “Virtualized Devices" (VDOMs). Therefore, only select a VLAN that is appropriate to the selected VDOM and switch.
For details on this view, see Model configuration in the Administration Guide.
-
-
Click OK to save.
-
If configuring RADIUS on the FortiSwitch, select the FortiSwitch and click the Model Configuration tab.
-
Select the appropriate Server Configuration from the drill-down.
-
Enter the Shared Secret and select OK.