Configure FortiSwitch (Link Mode)
Management Interface
In the FortiSwitch CLI, configure the management interface. Refer to the appropriate FortiSwitch CLI Reference Manual for options.
Reference:
Allow the following protocols:
PING
HTTPS
SSH
FortSwitches configured for RADIUS authentication must have a valid IP address (not 169.x.x.x). FortiNAC uses this address when disconnecting clients (RADIUS CoA).
-
Configure management interface name (if not already created). Type
config switch lldp settings
show
-
If not configured, type
set management-interface "internal"
end
Click on the appropriate link below to continue FortiSwitch configuration:
SNMP MAC Notification Traps (FortiOS 7.2 and above)
SNMP Traps (FortiOS 6.2.1 and above)
SNMP Traps (FortiOS 6.2.0 and below)