SNMP (System Level)
-
In the FortiGate web interface, go to System > SNMP.
-
Enable SNMP Agent to enable the SNMP service on the FortiGate.
-
Under the appropriate SNMP Protocol (v1/v2c or v3), click Create New to create a new Community to use with FortiNAC or verify the following are already configured in an existing Community.
SNMP community strings act as passwords for SNMP access.
SNMP Settings (v1/v2c)
|
Community Name |
Community Name |
|
Enabled |
Selected |
|
Hosts |
IP Address: <eth0 IP address of FortiNAC Control Server> Host Type: Accept queries and send traps |
|
Queries |
V1 or v2 enabled Port: 161 |
|
Traps |
V1 or v2 enabled Port: 162 |
|
SNMP Events |
Single FortiGate: <all disabled>
FortiGate in High Availability Mode: Enable the following:
|
SNMP Settings (v3)
|
User Name |
User Name |
|
Enabled |
Selected |
|
Security Level |
Authentication (No Private)
Authentication (Private)
|
|
Hosts |
IP Address: <eth0 IP address of FortiNAC Control Server>
Host Type: Accept queries and send traps |
|
Queries |
Enabled Port: 161 |
|
Traps |
Enabled Port: 162 |
|
SNMP Events |
Single FortiGate: <all disabled>
FortiGate in High Availability Mode: Enable the following:
|