Change log
Date |
Change description |
---|---|
February 8, 2023 |
Improvements to Displaying IP pool usage information. |
January 11, 2023 |
Added more information about |
January 4, 2023 |
The FortiGate-4800F and 4801F are supported by FortiOS 7.0.7. These models require an extra step when configuring hyperscale firewall VDOMs, see Enabling hyperscale firewall features. |
November 21, 2022 |
Corrections to Creating hyperscale firewall VDOMs. |
October 6, 2022 |
FortiOS 7.0.7 document release. More information and explanation added to Hyperscale firewall policy engine mechanics. |
September 28, 2022 |
FortiOS 7.0.7 Hyperscale firewall VDOMs support consolidated firewall policies. The statement about Hyperscale firewall VDOMs not supporting consolidated firewall policies has been removed from Hyperscale firewall 7.0.7 incompatibilities and limitations. |
August 16, 2022 |
New sections: FGSP HA hardware session synchronization and Basic FGSP HA hardware session synchronization configuration example. Changes to FGCP HA hardware session synchronization. |
August 12, 2022 |
Changes to the following sections to reflect that FortiOS 7.0.6 FGSP supports HA hardware session synchronization: |
August 9, 2022 |
Changes to Configuring FGCP HA hardware session synchronization. New sections:
Revised information about using the FortiGate-4200F/4201F and 4400F/4400F HA1, HA2, AUX1 and AUX2 interfaces. Using the following command is no longer recommended. Instead see the new sectionRecommended interface use for an FGCP HA hyperscale firewall cluster. config system npu config port-path-option set ports-using-npu {ha1 ha2 aux1 aux2} end |
July 21, 2022 |
Improvements to Hyperscale firewall VDOM session timeouts. New section Session timeouts for individual hyperscale policies. |
June 15, 2022 |
Added information about how FortiOS 7.0.7 hyperscale policies are no longer separated from normal firewall policies and how hyperscale firewall policies are converted during the upgrade process to Upgrading hyperscale firewall features to FortiOS 7.0.7. |
June 14, 2022 |
Misc. changes throughout the document. |
June 7, 2022 |
FortiOS 7.0.6 document release. See What's new for hyperscale firewall for FortiOS 7.0.7. New section: Allowing packet fragments for NP7 NAT46 policies when the DF bit is set to 1. |
May 17, 2022 |
Added more information about the verbose option to diagnose sys npu-session stat [verbose [{44 | 66 | 64 | 46}]] . |
April 5, 2022 |
Improvements to Displaying information about NP7 hyperscale firewall hardware sessions. |
April 4, 2022 |
FortiOS 7.0.5 document release. |