config wireless-controller setting
Description: VDOM wireless controller configuration.
set account-id {string}
set country [NA|AL|...]
set duplicate-ssid [enable|disable]
set fapc-compatibility [enable|disable]
set wfa-compatibility [enable|disable]
set phishing-ssid-detect [enable|disable]
set fake-ssid-action {option1}, {option2}, ...
config offending-ssid
Description: Configure offending SSID.
edit <id>
set ssid-pattern {string}
set action {option1}, {option2}, ...
next
end
set device-weight {integer}
set device-holdoff {integer}
set device-idle {integer}
set darrp-optimize {integer}
set darrp-optimize-schedules <name1>, <name2>, ...
end
Parameter Name | Description | Type | Size |
---|---|---|---|
account-id | FortiCloud customer account ID. | string | Maximum length: 63 |
country | |||
duplicate-ssid | Enable/disable allowing Virtual Access Points (VAPs) to use the same SSID name in the same VDOM. enable: Allow VAPs to use the same SSID name in the same VDOM. disable: Do not allow VAPs to use the same SSID name in the same VDOM. |
option | - |
fapc-compatibility | Enable/disable FAP-C series compatibility. enable: Enable FAP-C series compatibility. disable: Disable FAP-C series compatibility. |
option | - |
wfa-compatibility | Enable/disable WFA compatibility. enable: Enable Wi-Fi Alliance Certification compatibility. disable: Disable Wi-Fi Alliance Certification compatibility. |
option | - |
phishing-ssid-detect | Enable/disable phishing SSID detection. enable: Enable phishing SSID detection. disable: Disable phishing SSID detection. |
option | - |
fake-ssid-action | Actions taken for detected fake SSID. log: Write logs for detected fake SSID. suppress: Suppress detected fake SSID. |
option | - |
device-weight | Upper limit of confidence of device for identification (0 - 255, default = 1, 0 = disable). | integer | Minimum value: 0 Maximum value: 255 |
device-holdoff | Lower limit of creation time of device for identification in minutes (0 - 60, default = 5). | integer | Minimum value: 0 Maximum value: 60 |
device-idle | Upper limit of idle time of device for identification in minutes (0 - 14400, default = 1440). | integer | Minimum value: 0 Maximum value: 14400 |
darrp-optimize | Time for running Dynamic Automatic Radio Resource Provisioning (DARRP) optimizations (0 - 86400 sec, default = 86400, 0 = disable). | integer | Minimum value: 0 Maximum value: 86400 |
darrp-optimize-schedules <name> |
Firewall schedules for DARRP running time. DARRP will run periodically based on darrp-optimize within the schedules. Separate multiple schedule names with a space. Schedule name. |
string | Maximum length: 35 |
Parameter Name | Description | Type | Size |
---|---|---|---|
ssid-pattern | Define offending SSID pattern (case insensitive), eg: word, word, word, wo*rd. | string | Maximum length: 33 |
action | Actions taken for detected offending SSID. log: Generate logs for detected offending SSID. suppress: Suppress detected offending SSID. |
option | - |
config wireless-controller setting
Description: VDOM wireless controller configuration.
set account-id {string}
set country [NA|AL|...]
set duplicate-ssid [enable|disable]
set fapc-compatibility [enable|disable]
set wfa-compatibility [enable|disable]
set phishing-ssid-detect [enable|disable]
set fake-ssid-action {option1}, {option2}, ...
config offending-ssid
Description: Configure offending SSID.
edit <id>
set ssid-pattern {string}
set action {option1}, {option2}, ...
next
end
set device-weight {integer}
set device-holdoff {integer}
set device-idle {integer}
set darrp-optimize {integer}
set darrp-optimize-schedules <name1>, <name2>, ...
end
Parameter Name | Description | Type | Size |
---|---|---|---|
account-id | FortiCloud customer account ID. | string | Maximum length: 63 |
country | |||
duplicate-ssid | Enable/disable allowing Virtual Access Points (VAPs) to use the same SSID name in the same VDOM. enable: Allow VAPs to use the same SSID name in the same VDOM. disable: Do not allow VAPs to use the same SSID name in the same VDOM. |
option | - |
fapc-compatibility | Enable/disable FAP-C series compatibility. enable: Enable FAP-C series compatibility. disable: Disable FAP-C series compatibility. |
option | - |
wfa-compatibility | Enable/disable WFA compatibility. enable: Enable Wi-Fi Alliance Certification compatibility. disable: Disable Wi-Fi Alliance Certification compatibility. |
option | - |
phishing-ssid-detect | Enable/disable phishing SSID detection. enable: Enable phishing SSID detection. disable: Disable phishing SSID detection. |
option | - |
fake-ssid-action | Actions taken for detected fake SSID. log: Write logs for detected fake SSID. suppress: Suppress detected fake SSID. |
option | - |
device-weight | Upper limit of confidence of device for identification (0 - 255, default = 1, 0 = disable). | integer | Minimum value: 0 Maximum value: 255 |
device-holdoff | Lower limit of creation time of device for identification in minutes (0 - 60, default = 5). | integer | Minimum value: 0 Maximum value: 60 |
device-idle | Upper limit of idle time of device for identification in minutes (0 - 14400, default = 1440). | integer | Minimum value: 0 Maximum value: 14400 |
darrp-optimize | Time for running Dynamic Automatic Radio Resource Provisioning (DARRP) optimizations (0 - 86400 sec, default = 86400, 0 = disable). | integer | Minimum value: 0 Maximum value: 86400 |
darrp-optimize-schedules <name> |
Firewall schedules for DARRP running time. DARRP will run periodically based on darrp-optimize within the schedules. Separate multiple schedule names with a space. Schedule name. |
string | Maximum length: 35 |
Parameter Name | Description | Type | Size |
---|---|---|---|
ssid-pattern | Define offending SSID pattern (case insensitive), eg: word, word, word, wo*rd. | string | Maximum length: 33 |
action | Actions taken for detected offending SSID. log: Generate logs for detected offending SSID. suppress: Suppress detected offending SSID. |
option | - |