Enable IoT background scanning 6.4.3
Internet of Things (IoT) background scanning is now disabled by default. A valid IoT contract is required to enable it.
When IoT scanning is enabled, FortiSwitch will query the FortiGuard IoT service for additional device information.
To enable IoT background scanning in the GUI:
-
Go to WiFi & Switch Controller > FortiLink Interface.
-
Enable IoT scanning.
-
Click Apply.
To enable IoT background scanning in the CLI:
config system interface edit "internal11" set vdom "vdom1" set fortilink enable set ip 169.254.1.1 255.255.255.0 set allowaccess ping fabric set type physical set lldp-reception enable set lldp-transmission enable set snmp-index 11 set switch-controller-iot-scanning enable set lacp-mode static next end