(Optional) Configuring SD-WAN Status Check

You can optionally configure SD-WAN Status Check to verify the health and status of the links that make up the virtual WAN link.

This configuration uses the Ping protocol to verify the status of the SD-WAN.

Go to Network > SD-WAN Status Check and select Create New. If you wish to use Google, enter the values shown here.

You can optionally configure SD-WAN Status Check to verify the health and status of the links that make up the virtual WAN link.

This configuration uses the Ping protocol to verify the status of the SD-WAN.

Go to Network > SD-WAN Status Check and select Create New. If you wish to use Google, enter the values shown here.