Configuring the fourth FortiGate (Peer-4)
- Configure Peer-4 with the same configuration as Peer-1:
- Enable virtual domain configuration, add vdom1, set vdom1 to proxy mode, and add port 1 and port 2 to vdom1.
- Create a virtual wire pair between port 1 and port 2.
- Create a virtual wire pair policy to allow all traffic between port 1 and port 2. This example policy applies antivirus scanning, application control, and VoIP profiles.
- Configure Peer-4 for FGSP.
config system cluster-sync
edit 1
set peerip 10.10.10.1
set peervd root
set syncvd vdom1
next
edit 2
set peerip 10.10.10.2
set peervd root
set syncvd vdom1
next
edit 3
set peerip 10.10.10.3
set peervd root
set syncvd vdom1
end