Fortinet black logo

EMS Administration Guide

Home FortiClient 7.2.3 EMS Administration Guide
7.2.3
7.2.4
7.2.3
7.2.2
7.2.1
7.2.0
7.0.12
7.0.11
7.0.10
7.0.9
7.0.8
7.0.7
7.0.6
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.4.9
6.4.8
6.4.7
6.4.4
6.4.3
6.4.2
6.4.1
6.4.0
6.2.9
6.2.8
6.2.7
6.2.6
6.2.4
6.2.3
6.2.2
6.2.1
6.2.0
6.0.8
6.0.6
6.0.5
6.0.4
6.0.3
6.0.2
6.0.1
6.0.0

Persistent connection

Persistent connection

When Use persistent connections is enabled, FortiClient creates a persistent connection with EMS. It does not tear down and renegotiate the TLS connection at every keepalive interval.

To enable persistent connections:

  1. In EMS, go to System Settings > EMS Settings.

  2. Under EMS Settings, enable Use persistent connections.

  3. Click Save.

This feature requires FortiClient 7.2.1 and EMS 7.2.1. If either FortiClient or EMS is on a version older than 7.2.1, FortiClient and EMS establish a non-persistent connection.

Previous
Next

Persistent connection

When Use persistent connections is enabled, FortiClient creates a persistent connection with EMS. It does not tear down and renegotiate the TLS connection at every keepalive interval.

To enable persistent connections:

  1. In EMS, go to System Settings > EMS Settings.

  2. Under EMS Settings, enable Use persistent connections.

  3. Click Save.

This feature requires FortiClient 7.2.1 and EMS 7.2.1. If either FortiClient or EMS is on a version older than 7.2.1, FortiClient and EMS establish a non-persistent connection.

Previous
Next