Fortinet Document Library

Version:


Table of Contents

About FortiAnalyzer for OCI

Deploying FortiAnalyzer on OCI

6.2.0
Copy Link

Preparing a Deployment

The deployment step mentioned in this guide assumes that you have already created a VCN and relevant network resources such as route tables and subnets. You must also configure a Security List so that you can access FortiAnalyzer over the Internet while closing unnecessary ports. See below:

You will at least need to open TCP port 443 to allow incoming access to FortiAnalyzer's management GUI console (or port 22 for SSH if you are familiar with the FortiAnalyzer command line interface) for initial configuration. See FortiAnalyzer open ports.

There are two methods for creating an instance. Select one of the following methods:

 

Preparing a Deployment

The deployment step mentioned in this guide assumes that you have already created a VCN and relevant network resources such as route tables and subnets. You must also configure a Security List so that you can access FortiAnalyzer over the Internet while closing unnecessary ports. See below:

You will at least need to open TCP port 443 to allow incoming access to FortiAnalyzer's management GUI console (or port 22 for SSH if you are familiar with the FortiAnalyzer command line interface) for initial configuration. See FortiAnalyzer open ports.

There are two methods for creating an instance. Select one of the following methods: