DHCP monitor

The DHCP monitor displays all the addresses leased out by FortiGate's DHCP servers. You can use the monitor to revoke an address for a device, or create, edit, and delete address reservations.

To view the DHCP monitor in the GUI:

1. Go to Dashboard > Network.
2. Hover over the DHCP widget, and click Expand to Full Screen.

To filter or configure a column in the table, hover over the column heading, and click Filter/Configure Column.

To revoke a lease:

1. Select a device in the table.
2. In the toolbar, click Revoke, or right-click the device, and click Revoke. The Confirm window opens.
3. Click OK.

A confirmation window opens only if there is an associated address reservation. If there is no address, the lease will be removed immediately upon clicking Revoke.

To create a DHCP reservation:

1. Select a server in the table.
2. In the toolbar, click Reservation, or right-click the device, and click Create DHCP Reservation. The Create New DHCP Reservation window opens.
3. Configure the DHCP settings.
4. Click OK.

To view top sources by bytes:

1. Right-click a device in the table, and click Show in FortiView. The Top Sources by Bytes widget opens.

To view the DHCP lease list in the CLI:

# exec dhcp lease-list