Supported Upgrade Releases
This section describes the upgrade path for this release.
|
From FortiWLC release... |
To FortiWLC Release... |
|---|---|
|
7.0 |
7.0-13 |
|
8.0 |
8.0-5-0, 8.0-6-0 |
|
8.1 |
8.1-3-2 |
|
8.2 |
8.2.7 |
|
8.2.7/8.3 |
8.3.1 |
|
7.0.11, 8.2.7, 8.3.0, 8.3.1, and 8.3.2 |
8.3.3 |
|
7.0-11, 8.2.7, 8.3.0, 8.3.1, and 8.3.2 |
8.4.0 (CLI upgrade only) |
|
8.3.3 |
8.4.0 |
|
8.4.0, 8.4.1, 8.4.2, 8.4.3, 8.4.4 |
8.5.0 |
|
8.4.0, 8.4.1, 8.4.2, 8.4.3, 8.4.4, 8.5.0 |
8.5.1 |
|
8.4.0, 8.4.1, 8.4.2, 8.4.3, 8.4.4, 8.4.5, 8.4.6, 8.4.7, 8.5.0, 8.5.1 |
8.5.2 |
NOTES:
- Fortinet recommends that while upgrading 32-bit controllers, use the upgrade controller command instead of the upgrade system command.
- Controller upgrade performed via CLI interface will require a serial or SSH2 connection to connect to the controller and use its CLI.
- FortiWLC-1000D and FortiWLC-3000D and 64-bit virtual controller upgrades can be performed via GUI as well.
- Upgrade the FortiWLC-1000D and 3000D controllers with manufacturing version prior to 8.3-0GAbuild-93 to version 8.3-0GAbuild-93 and then to the later builds.