system firewall service

Use this command to configure the protocols and ports that FortiWeb's built-in stateful firewall uses. You use the service configuration in a firewall policy. For details, see system firewall firewall-policy.

Syntax

config system firewall service

edit "<firewall-service_name>"

set protocol {TCP | UDP | ICMP}

set source-port-min <source-port-min_int>

set source-port-max <source-port-max_int>

set destination-port-min <source-port-min_int>

set destination-port-max <source-port-max_int>

end

Variable	Description	Default
"<firewall-service_name>"	Enter a name that identifies this firewall service configuration.	No default.
protocol {TCP | UDP | ICMP}	Select the protocol for this firewall service configuration.	TCP
source-port-min <source-port-min_int>	Enter the start port in the range of source ports for this firewall service.	0
source-port-max <source-port-max_int>	Enter the end port in the range of source ports for this firewall service	65535
destination-port-min <source-port-min_int>	Enter the start port in the range of destination ports for this firewall service.	0
destination-port-max <source-port-max_int>	Enter the end port in the range of destination ports for this firewall service	65535

Related topics

• system firewall address
• system firewall firewall-policy