"<x-forwarded-for_name>"

Enter the name of the new or existing group. The maximum length is 63 characters.

To display the list of existing groups, enter:

edit ?

block-based-on-original-ip {enable | disable}

Enable to be able to block requests that violate your policies by using the original client’s IP derived from this HTTP X-header.

When disabled, only attack logs and reports will use the original client’s IP.

ip-location {left | right}

Select whether to extract the original client’s IP from either the left or right end of the HTTP X-header line.

Most proxies put the request’s origin at the left end, which is the default setting. Some proxies, however, place it on the right end.

original-ip-header "<HTTP-header-key_str>"

Enter the key of the X-header, such as X-Forwarded-For X-Real-IP, without the colon ( : ), that contains the original source IP address of the client. Also configure tracing-original-ip {enable | disable} and, for security reasons, ip "<load-balancer_ip>".

Maximum length is 256 characters.

tracing-original-ip {enable | disable}

If FortiWeb is deployed behind a device that applies NAT, enable this option to derive the original client’s source IP address from an HTTP X-header, instead of the SRC field in the IP layer. Also configure original-ip-header "<HTTP-header-key_str>" and, for security reasons, ip "<load-balancer_ip>".

This HTTP header is often X-Forwarded-For: when traveling through a web proxy, but can vary. For example, the Akamai service uses True-Client-IP:.

For deployment guidelines and mechanism details, see the FortiWeb Administration Guide:

HTTPS://docs.fortinet.com/fortiweb/admin-guides

Caution: To combat forgery, configure the IP addresses of load balancers and proxies that are trusted providers of this header. Also configure those proxies/load balancers to reject fraudulent headers, rather than passing them to FortiWeb.

x-forwarded-proto {enable | disable}

Enable to add an X-Forwarded-Proto: header that indicates the protocol used in the client’s original request.

Requires Reverse Proxy or True Transparent Proxy mode.

x-forwarded-for-support {enable | disable}

Enable to include the X-Forwarded-For: HTTP header on requests forwarded to your web servers. Behavior varies by the header already provided by the HTTP client or web proxy, if any:

• Header absent—Add the header, using the source IP address of the connection.
• Header present—Verify that the source IP address of the connection is present in this header’s list of IP addresses. If it is not, append it.

This option can be useful for web servers that log or analyze clients’ IP addresses, and support the X-Forwarded-For: header. When this option is disabled, from the web server’s perspective, all connections appear to be coming from the FortiWeb appliance, which performs network address translation (NAT). But when enabled, the web server can instead analyze this header to determine the source and path of the original client connection.

This option applies only when FortiWeb is operating in Reverse Proxy mode or True Transparent Proxy.

x-real-ip {enable | disable}

Enable to include the X-Real-IP: HTTP header on requests forwarded to your web servers. Behavior varies by the header already provided by the HTTP client or web proxy, if any. For details, see x-forwarded-for-support {enable | disable}).

Like X-Forwarded-For:, this header is also used by some proxies and web servers to trace the path, log, or analyze based upon the packet’s original source IP address.

This option applies only when FortiWeb is operating in Reverse Proxy or True Transparent Proxy mode.

skip-private-original-ip {enable | disable}

Enable to skip the private original IP that indicates the service used in the client’s original request.

x-forwarded-proto {enable | disable}

Enable to add an HTTP header that indicates the service used in the client’s original request.

Usually if your FortiWeb is receiving HTTPS requests from clients, and it is operating in Reverse Proxy mode, SSL/TLS is being offloaded. FortiWeb has terminated the SSL/TLS connection and the second segment of the request, where it forwards to the back-end servers, is clear text HTTP. In some cases, your back-end server may need to know that the original request was, in fact, encrypted HTTPS, not HTTP.

<entry_index>

Enter the index number of the individual entry in the table.

The valid range is 1–9,223,372,036,854,775,807.

Each list can contain a maximum of 256 IP addresses.

ip "<load-balancer_ip>"

Type the IP address of a load balancer or proxy that is in front of the FortiWeb appliance (between the client and FortiWeb).

To apply anti-spoofing measures and improve security, FortiWeb trusts the contents of the HTTP header that you specify in original-ip-header "<HTTP-header-key_str>" only if the packet arrived from one of the IP addresses you specify here. It regards original-ip-header "<HTTP-header-key_str>" from other IP addresses as potentially spoofed.

For packets from other IP addresses, FortiWeb ignores the X-Forwarded-For: header and uses the source IP address in the IP header as the client source address. This IP address is displayed in the attack log message.

add-source-port {enable | disable}

Enable to add an X-Forwarded-For: header with the connection's source IP. If this field is enabled, the source port of the request will be added as well.

Available only when FortiWeb operates in Reverse Proxy, True Transparent Proxy, or WCCP mode.